GPS is connecred to FastTrack on PowerBox units such as Pioneer/Mercury SR2 etc when you want to use the speed compensation feature. In this case the GPS data is accessed through the PowerBoc unit itself. If you don't require the speed compensation feature then you can just connect the GPS to P2Bus. If using GPS with a standalone Rx (eg. 9D) then the GPS is connected to P2Bus port. Standalone receiver connection of GPS is different to when using a PowerBox unit as GPS must only be connected to P2Bus.
You just enter its menu via the Tx. Navigate to the receiver menu where you bind the receivers and simply short press on the picture of the 26XS. This will then allow you access to the programmable options for the 26XS. Its the same as other receivers.
Hi there... At this stage no. Only the 26XS can be used as a satellite Rx. PowerBox were looking at allowing a 26D to be used as a satellite but at this stage you cannot.
You mentioned that P2Bus is for telemetry. You also mentioned that GPS and Gyro would connect to FastTrack. I thought GPS is telemetry.
GPS is connecred to FastTrack on PowerBox units such as Pioneer/Mercury SR2 etc when you want to use the speed compensation feature.
In this case the GPS data is accessed through the PowerBoc unit itself.
If you don't require the speed compensation feature then you can just connect the GPS to P2Bus.
If using GPS with a standalone Rx (eg. 9D) then the GPS is connected to P2Bus port. Standalone receiver connection of GPS is different to when using a PowerBox unit as GPS must only be connected to P2Bus.
How do you configure the 26XS to FastTrack?
You just enter its menu via the Tx. Navigate to the receiver menu where you bind the receivers and simply short press on the picture of the 26XS. This will then allow you access to the programmable options for the 26XS. Its the same as other receivers.
Can a 26D connect to another 26D as a satellite?
Hi there... At this stage no. Only the 26XS can be used as a satellite Rx.
PowerBox were looking at allowing a 26D to be used as a satellite but at this stage you cannot.
OK thank you very much.@@CVHeliPilot
By the way, can 26xs connect to 26D?@@CVHeliPilot