THANK YOU !!!! I have been going out of my mind (I admit it's not a far trip), trying to set the correct time when I needed to change it. 11 months ago I bought a different brand but it is exactly the same model as this clock with written instructions that were garbage. Your instructions are clear and concise. BRAVO SIR!
THANK YOU SO MUCH! I bought this off Temu and there was no manual or anything. I love it in my vanity mirror when getting ready for work or parties I can always see the time I have left 😂
thank you for the clear instructions, very helpful. However my clock does not display the time continuously. When tap the clock the time will show and then the screen will go black until some type of motion activates the screen. How can I set it to display time always
Hi there how do you keep the time to display keeps shutting off when I set it can you please show me how to keep the time time to show with out shutting off
If you want to sleep. You can turn the clock face completely off. By holding down the snooze button for 3 seconds. To turn display back on. Just push any button.
just remove the USB cable from power source and remove the battery then wait for 2 minutes and put them back the time will go back to "0:00" then you can set it again.
I just made a video on this! Please watch it. Just tap the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound then release. It will then remain in the time only without cycling.
I was able to set everything you talked about, thank you. BUT..... When it sets on my dresser, it goes to completely dark. I have to tap it or yell at it to see the time. How do I keep it on and not go black?
@@hogriderrrrr8412I use both batteries and cable but still the display keep turning off after 16 secs But when I took off the batteries though it’s still plug in, the clock is shut down Pls help
Idk if it’s too late but you have to turn night mode on by pressing mode until you see OFF then press either up or down and it should now say ON. Then you’re gonna hold mode while it says ON and 18:00 should pop up. You’re basically gonna set the time you want it to be in night mode. P.S you do need to plug in the cord in order for it to stay on
Press the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound. This will set it back to normal. if you repeat it takes you back to the cycling mode
I think I should describe that as sound activation not voice activation. If you give it a loud clap it wakes up or any loud sound. So you can choose the sound either spoken or otherwise.
@@techloamaaagggghhh I know everyone keeps asking about this but mine is plugged in and it still keeps switching off the display. I wonder if I got a faulty one?!
@@garylock7539Press the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound. This will set it back to normal. if you repeat it takes you back to the cycling mode.
As you change the hours during setting you should be watching the PM icon. When it disappears it means AM and when it appears it means PM. It doesn't have an AM icon.
Ok it was good until you mumbled that once you get to 24 hr mode that you can toggle the up or down button for the 12 hr mode. Maybe it was a problem with accent because I had to listen very closely several times to hear you say this. Because the up and down buttons according to instructions were simply for adjusting brightness it needed to be explained in more detail in my opinion. Thanks
![LAVROV's interview with Tucker CARLSON 😁 [Parody]](http://i.ytimg.com/vi/mbMemqc-QEk/mqdefault.jpg)
Thanks for this the instructions were really confusing
THANK YOU !!!! I have been going out of my mind (I admit it's not a far trip), trying to set the correct time when I needed to change it. 11 months ago I bought a different brand but it is exactly the same model as this clock with written instructions that were garbage. Your instructions are clear and concise. BRAVO SIR!
I come back to this video every time my power goes out and resets my clock... It feels like coming home each and every time ❤
@@mrglitchcrazy8695 Really? Glad it served its purpose. Thanks
LOL...
Can you make a video on how to easier change the am pm time for the alwrm
THANK YOU SO MUCH! I bought this off Temu and there was no manual or anything. I love it in my vanity mirror when getting ready for work or parties I can always see the time I have left 😂
This is super easy but I was going in circles!😅😂😂😂
Thanks man!
Brilliant review and instructions. The best out of all the RUclips folks so well done. Awesome job!
you're a gem for posting this! thank you! :)
Thank you
This what a RUclipsr should be thank u 1 video and I am already subscribing 😂
Thank you!
This vid is very useful😊... beacuse i was wondering how to set it mostly the alarm...Thanks😊
I'm glad it was useful. Thanks for watching!
Awesome video I have been struggling on how to work this and u gave really clear instructions thank yoooou😊
Thank you. Very clear instructions!
Thank you too!
thank you for the clear instructions, very helpful. However my clock does not display the time continuously. When tap the clock the time will show and then the screen will go black until some type of motion activates the screen. How can I set it to display time always
The display will only be on permanently if you have it plugged in. It times out if you use batteries
@@jillianx3lea omg this is so stupid
@@babyboasty6033 I was equally pissed when I discovered that 😆
Bruh I literally came here coz of same issue
Great job explaining how the clock works
Thank you!
Thank you i was so confused very clear and helpful video
Thank you for watching!!!
Hi there, thank you so much. This was so helpful and easy to understand 👍🏾😁
I bought a few of these clocks. I like them. Great video
Thank you for the clear review
Hi there how do you keep the time to display keeps shutting off when I set it can you please show me how to keep the time time to show with out shutting off
Thank you for the short tutorial. Very helpful❤
If you want to sleep. You can turn the clock face completely off. By holding down the snooze button for 3 seconds. To turn display back on. Just push any button.
Thank you so much this really helped out❤
Thanks for watching!
this really helped, thank you!!
I'm glad it helped. Thank you for watching!
Its sound activated how we do that some times certain sound will activat any idea what sound will start it
Any loud sound will activate it! I use a knock on the table to wake it up!
Finally got it thanks
How do you get that annoying flashing center lights off?
Hello friend, I am writing using translation because I do not speak English. What can I do to keep this clock on all the time?
Hello, I am already using USB but still it always goes off. May I know how to set it always on when the USB is already plugged in.
Please do a reset by removing the USB cable and batteries and putting them back so it goes back to default.
Why the alarm doesn't ring after i set it up?
Very helpful video, thanks! I have one question. I set up an alarm, how can I deactivate the alarm?
I have a followup video after this one. Watch for the answer you seek.
Thank you! Your video was helpful
@@jahvoughnfrancis2766 Thanks for watching
Thanks this helped alot
Glad it helped
How do you toggle the screen from time, date and temperature?
Watch my recent video on this clock...
Thank you so much! You helped me alot
I'm glad it helped. Thanks for watching
Merci beaucoup pour ton aide,😊
Glad it helped
This video was very helpful thank u
I'm glad it did. Thanks for watching
is there a way to see the temperature and time at the same time? also great video very clear instructions
No, sorry
Mine is stuck with the numbers on the left side, Am/pm and alarm light are showing but I can’t manage to restart it to put the time on again
just remove the USB cable from power source and remove the battery then wait for 2 minutes and put them back the time will go back to "0:00" then you can set it again.
how do u make it say am/pm??
Is there a way to make it stay open the whole time? Because it automatically closes after 5 seconds or so
Yes by connecting the USB cord provided to a power source
@@techloamcan you keep it open without using a cable?
@@kamilowskyyy. yes that happens temporarily then goes back blank after some seconds
How do you switch from Celsius to Ferenheit?
click mode until you find the temperature then click the down button
How do i setup the voice control!??? Help haa
!!!
Was really helpful
Glad it was helpful. Thanks for watching.
Is there a way to stop the annoying blinking dots on the default clock?
Is there a way to set it so that it doesn't cycle between all info and it just stays on the time?
I just made a video on this! Please watch it. Just tap the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound then release. It will then remain in the time only without cycling.
Thank you! I had the same question the other modes are cool, but that time mode is why we we needed this clock😊
Thank you ❤
@@Kate143._3Thanks for watching
Nice job, big boss. This was too hard to figure.
Why everything disappear and the screen turns off after 10 seconds? Please, can you advise?
you will need to attach the USB cable to a 5v power source to keep it on at all times.
So if I see it for 6:35 will just ring for am and pm lol ?
How can i turn on/ off the function of voice control? Mine stay on all the time
I was able to set everything you talked about, thank you. BUT..... When it sets on my dresser, it goes to completely dark. I have to tap it or yell at it to see the time. How do I keep it on and not go black?
Put the USB to a power source
@@techloam I don't see that in any instructions, videos, or information. Thanks for letting me know.
Very well explained 👏
How can I keep it on that display. It’s keep going on dark at every 16 seconds
You have to use the cable
@@hogriderrrrr8412I use both batteries and cable but still the display keep turning off after 16 secs
But when I took off the batteries though it’s still plug in, the clock is shut down
Pls help
Im usig the cable , but its keep going on dark at every 16 seconds
Please , help me
Idk if it’s too late but you have to turn night mode on by pressing mode until you see OFF then press either up or down and it should now say ON. Then you’re gonna hold mode while it says ON and 18:00 should pop up. You’re basically gonna set the time you want it to be in night mode. P.S you do need to plug in the cord in order for it to stay on
When I go to the time and hold down for 3seconds it doesn’t change it’s stuck at 12:00
Thank u is not enough but thank u may Allah guide u
Thank you so much!
Thanks very much boss
How do i change to the second alarm
X2
@@martinvargas6289 howw
Instructions say voice command how so?
is there any way i can stop the bright from turning bright when it hits 6am?
please answer this, i want to know before i return the clock.
whats up with the "the working day alarm setting "it's apart of the alarm mode steps and it shows 1-5,6,7???
1-5 is Mon-Fri, 1-6 I presume is Mon-Sat but i've never tested it and 1-7 is everyday
Can I put the battery in this led clock while it is charging... ???Will there be any problem..???
That cable is not for charging... it makes the clock to display fully. Yes you can put the battery inside as you also connect the cable.
@@techloamI plug it in but the display keeps turning off. What should I do?
Hello my friend thank you so very much for your information. How do I change the lighting display on the clock?
You mean to dim the display?
How to stop the two dots from flashing?
Not in the manual
How do you do voice mode please?
It's not really voice but any sound will do...
Why does mine keep turning off and how can i stop it from doing that?
WHAT DO I DO THAT THIS CLOCK IS ALWAYS ON. BEACUSE AFTER SOME SECONDS IT TURNS OFF SO I NEED TO GO AND PRESS A BUTTON TO SEE WHAT TIME IS IT
plug the USB provided to a 5V power source to have it on constantly
Have you had a problem with dropping it & the clock resets to 12?
I want the clock to stay on and/or rotate through all the modes - time, date, temp....rotate!?
Thank u
How to set am or pm
It's only PM that displays! No PM means AM. When setting the clock, it does not display PM from 0 hrs until after 12hrs that means AM.
How to change the 12 hr PM TO AM
Mine keeps changing from clock, date and temp. How do I keep it on just the clock?
Press the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound. This will set it back to normal. if you repeat it takes you back to the cycling mode
Why does my keep going off it works but every two seconds it goes off so I have to click it that it can work if you can help please do
Thanks for video. Very informative.
They said it can talk and you can talk
To it how do I do that ?
I think I should describe that as sound activation not voice activation. If you give it a loud clap it wakes up or any loud sound. So you can choose the sound either spoken or otherwise.
@@techloam ok thank you
@@techloam well how do you choose the sound
Yes how do I set up the voice control?
is turning the night mode on for the light to be dimmed or do you have to keep it off so the brightness doesn’t turn on?
Yes night mode is to dim the brightness only.
why does it automatically get bright when it hits 6am
@@techloam is there any way to stop the clock from automatically turning bright every time it hits 6am?
How do I change from pm to am
How do I keep the clock display on rather then turning off after a few seconds
Always keep the cable provided connected to a source of power and it will stay on.
@@techloamaaagggghhh I know everyone keeps asking about this but mine is plugged in and it still keeps switching off the display. I wonder if I got a faulty one?!
Tnx very helpful
How can you change it to AM it's going off at 8 pm for me but I need to wake up at 8 am
Please check my latest video for a response to your question. Thanks!
How do I change the day setting???
How do you stop the clock switching from time to temperature to date then back ti time?.. I just need the time shown all time.
Still waiting on a reply??
@@garylock7539Press the mode button until you reach the temperature then press and hold the mode button until you hear a beep sound. This will set it back to normal. if you repeat it takes you back to the cycling mode.
@@techloamthank you very much
thank you
How do you put am or pm
Change the time format to 12hr then set the time while observing when its "AM or PM"
Why does mine automatically turn off i want to keep seeinh the time
Is this clock ment to stay on I can’t get display to stay on. Can someone explain to me please
It will stay on when the USB is connected.
How do I set Am and PM? 😢
As you change the hours during setting you should be watching the PM icon. When it disappears it means AM and when it appears it means PM. It doesn't have an AM icon.
How do I just keep the clock numbers light up. I am delivering this to my mother in a nursing home that just wants to see the time only!
You might need to connect it continuously with a power bank or a USB charging device plugged continuously to power.
Ok it was good until you mumbled that once you get to 24 hr mode that you can toggle the up or down button for the 12 hr mode. Maybe it was a problem with accent because I had to listen very closely several times to hear you say this. Because the up and down buttons according to instructions were simply for adjusting brightness it needed to be explained in more detail in my opinion. Thanks
So how can I see the temprature at the display
How do you make the clock stay on always when using battery. It keeps turning off after 16 seconds because of the power saving but I don’t want that
That is the battery saving feature and only happens when it's not connected to a 5v power source using the cable provided
Thank you!
@@techloamit doesn’t make sense so what’s the point of the battery’s if it’s going to be connected anyway
@@ConfusedGarden-mw4og I thought so too
Can i plug it to charger while there's AAA battery inside?? Is it not harmful?
No it's not harmful. That is the way you should set it up. The AAA battery is to retain accurate time in case the charger is removed.
why does the clock turn black after a while i want the time to be visible all the time, is there any way?
The USB cable must be connected to a 5v source for the clock to be visible all the time.
I don’t understand how do you connect it to a 5V source
@@shuhad3044 The USB cable supplies 5v when you connect it to a charger or computer.
How do we stop the screen from turning off. It's useless without our seeing the time
Seem happend to me but if you put the charger it well stay on but I don't know how to make it stay on with out the charger
Why my clock not ringing whene i set up alarm
make sure you activate the alarm to ring by making sure the alarm icon is showing or check the PM icon in case you set it ring AM instead of PM
Do you press up and down at the same time??
No! You use up and down to choose the numbers and others
how do I change the led colour
You can't change the LED color. You will rather buy the color you like.
Best
Thank you
Where can I get some pls
Link in the description.
everytime i unplug it goes back 0:00 like it resets my clock time
@@lilyroleplay2952 Check the batteries, they might be dead or not properly placed
THANK YOU
How to voice activate it
Any loud sound can activate it you might just have to choose which word to say. I tap the table to make it active.