I love the 357 , 359 saws if there built rite They work great , coils from 365, 372 , 385 390 will work on those saws , now I have a little tip the clutch cover off a 455 rancher will fit the 350 up to the 359 , it has the adjustment on the cover like the bigger saws just let you know I have them on all my 357and 359s 😊
@@novicelumberjack These misdiagnosed saws are sometimes a good thing. They end up in the trash/scrap yard, where they become mine! I've come across a few good finds here lately.
Mr Cajun is spot on about the muffler and the carb. If your saw has the stock walbro carb with the thick plastic block under the top cover get rid of it . The diagram cover is not vented and will starve the saw for fuel and can cause a lean run situation. I am currently rebuilding a 359etec for this reason. You can replace the walbro carb with a zamz EL42 and mod or replace the muffler. Cheers man. 🍻
Yes drilling a hole will work but as Mr Cajun pointed out the delivery port in the walbro carb is also restricted for emissions and fuel economy. Cheers 🍻
Etec had the muffler with the baffle in the middle. Hda199 carb with the accelerator pump and a smaller low fuel circuit.
Thanks Pat. It definitely has the cat muffler. Carb is a Walbro and I already drilled the hole in it.
😁
I wish I had one of those seal puller tools
Nice! Looks like that improper diagnosis turned out to your benefit and a pretty clean saw👍🏻
Yessir! Very excited about this saw. Pretty low hour unit.
I love the 357 , 359 saws if there built rite They work great , coils from 365, 372 , 385 390 will work on those saws , now I have a little tip the clutch cover off a 455 rancher will fit the 350 up to the 359 , it has the adjustment on the cover like the bigger saws just let you know I have them on all my 357and 359s 😊
That's supposed to be diaphragm cover and the zama carb is EL42 sorry about the mix up. 😂😂 cheers 🍻
359 can make a mean runner. Mike “driller” Toath on you tube builds the meanest 359 I’ve seen
Wuz🆙🐊
@@Doc-Cole_Trickle-of-Chainsaws chomp
April is such a nice month. The only month I get off from training and having time for chainsawing! Boedy is inspiring!
It Jason gotten hot here quickly! 84⁰ today.
Mr Cajun is spot on about the muffler and the carb . If your saw has the stock walbro card
It feels good to have an unexpected win like that. Rest if the day goes smooth as.
Hey AH!
Truly! I was soo dang happy to see a prestine piston. Turned out to be the coil of all things. Totally misdiagnosed!
@@novicelumberjack These misdiagnosed saws are sometimes a good thing. They end up in the trash/scrap yard, where they become mine! I've come across a few good finds here lately.
@@Doc-Cole_Trickle-of-Chainsaws G’day Darin
@@novicelumberjack That’s great, Dubb’s has been battling with with a coil with an intermittent fault.
Mr Cajun is spot on about the muffler and the carb. If your saw has the stock walbro carb with the thick plastic block under the top cover get rid of it . The diagram cover is not vented and will starve the saw for fuel and can cause a lean run situation. I am currently rebuilding a 359etec for this reason. You can replace the walbro carb with a zamz EL42 and mod or replace the muffler. Cheers man. 🍻
How about just drill a venting hole into Walbro carb ;)
It definitely has a Walbro carb. And yes, I drilled the hole to vent the diaphragm.
Yes drilling a hole will work but as Mr Cajun pointed out the delivery port in the walbro carb is also restricted for emissions and fuel economy. Cheers 🍻
Had a shoo tell a buddy a saw was blown up I got it here and the carb screen was clogged 😆 saw shops want to sell new saw
Amazing how often you hear things like that 🤦🏽♂️
The 357 has crank stuffers and 359 has a normal crank , the part number for the cranks are the same just the stuffer is different
I think ETech has catalytic muffler? Restrictive and holds heat. Most had plastic intake clamp which led to many air leaks.
Yep. Definitely has a cat muffler. Horribly restrictive.
1:07 The Joker realizes what has happened.
Gotham will be cut down.
were you drinking while making this vid?
No, I was not. Why do you ask?
👍
👍🆙BigGuy
Comment from me today
Hi again
Hello Troy. Do you have a wife named Helen?