you buy these kinds of cars stock because it's less likely someone thrashed it, if he really wanted his stock wheels it's not hard at all to find someone either selling a set with tires for like $400 or willing to trade for another set.
Maaaan. To digress from what your actually making reference to. And not to rant. And im not a F*** the police kinda guy. But cmon police need to start enforcing laws and penalize the actual problems in our modern canadian society. Not go for the low hanging fruit buy nabbing the enthusiest holding onto what little bit of their youth that the government allows or the kid who actually enjoys using his hands to wrench on shit and not sit around playing xbox
@@coryhaynes8755 loud =/= fast. If it is reasonable, fine; but some people have 100 dB+ exhausts meant for tracks, not the street. Maybe you need to realize there are other people in the world; I was one of the problem in the past; removed the cat back from a 91 RX-7 convertible; and drove it that way until I sold it to a friend a couple years later. One day maybe you'll understand. The illegal dB level isn't absurdly low, btw. You can have a rather aggressive exhaust; but again; most people get raspy/tinny exhaust, not clean, smooth, deep tones. They don't consider drone. They don't think too much at all, and I'm not sure why it is such a trend. NASCAR? Fast & Furious? A deep throaty exhaust does sound good; but maybe I've heard too many tin cans. I also agree the public servants, police, need to use better discretion and go after violent crimes and theft. A friend was given a ticket for accelerating before the speed limit sign, but it was around 100 yards ahead of them; they paid it already when they told me, as I suggested they fight it in court, as there is no way it would stick. They did it because they drive a BRZ and the exhaust is a bit louder than stock. Of course I wasn't with them, but I've been harassed by police when I was young, car searched several times without due cause but didn't want to escalate the issue even back then as also had a cop pull his gun on me when I was pulling my wallet out of my pocket after he asked me to, outside of the car, like he asked me to be. The problem is, the wrong people become cops; power hungry, unstable, us vs them mentality, a grudge to bear, etc. instead of being people who truly want to do what is best for the community they are serving and getting paid by. My point of view is slanted by being in the U.S.A.; but it is an issue of people who feel a false sense of authority any place in the world. I feel for anyone getting harassed and I'd rather them pass up a loud exhaust and ticket and fine people with 20 degree camber and stretched tires as they are an actual public safety hazard. The capability of the car to do anything is greatly reduced; stop, turn, etc. so an emergency situation pops up and the chances of it becoming a casualty/fatal incident is tremendously increased. If you want that kind of car, it is a show car. You trailer it to events, you don't drive it on the street. Have 45 degree camber and 155 tires on 12" rims if you could make it happen for all I care, just stay off the public roads with it; same with aggressive drivers needing to chill the fuck out and pay for some track time. You hear actual race drivers say they drive slow on the streets, because after the shit they see at 200 mph; being crazy on public roads in a normal seat belt and cars that aren't as safe doesn't seem fun or well thought out course of action.. So some police can go fuck themselves, I've met good ones too; but just stop, think, and be responsible. To your own safety and others. To being decent to those around you. Do you want a 180 dB sound competition car booming down your street at night? Next to you at a stop light? Probably not. Nor do you want one that is capable of 95 dB rattling your rearview from several cars back. Same goes for those loud exhausts. It isn't for the streets; even though driving through tunnels and under overpasses is beautiful to the ears; been there, get it, but realized later on it was pretty selfish of me, but being a teenager I wasn't thinking of the bigger picture. They have manual and electric actuators to bypass exhaust for shows and track events; if you have 2k for an exhaust, you have the money to make it both loud and quiet.
That stainless kit actually doesn't seem so loud, just a nice-sounding stainless setup. It's much more about if it's a good sound than a loud one with me, and that doesn't look like it has a lot of restriction, either, so that's about my ideal for most things. (I do like to drive with music, and almost always with windows down, so I just want it to sound *good.* For my daily, I didn't really need a new exhaust, so I just cut out a bit of extra restriction and sprung for a nice stainless pencil tip, made everything sound much more pleasing to me. It can actually do wonders if you choose well.
@@OllamhDrab watched a video sometime in the last few weeks dealing with exhaust, pulses, velocity, etc; and it is actually interesting how small some race exhausts are. I feel perception is skewed for a few reasons on things like large exhausts; american racing culture is heavily inspired by drag racing and nascar; then the F&F series which for me honestly is a shit show of pure child fantasy of what fast cars are like, not written by someone who knows anything ... I love RX7s, and just the one clip from I'm guessing the first move had me throw my palm to my face so hard I got a concussion :p My friend's BRZ is not too loud, I get to drive it now and then; shame its an auto, but it can get 45 mpg highway cruising average on 100 mile round trips. It is deep, throaty, and a bit loud. I can hear the rumble at idle of the car slightly inside the house with windows closed; but its not obnoxious. The got it from carmax with 700 miles on it, and I haven't checked to see if the previous owner changed anything; I know it isn't UEL headers, no burble, talked them into doing that one day, but I had one from 2017, theirs is 2019, and I'm pretty sure this exhaust is louder and more aggressive, but in a very good way. I love a deep/low tone for idle. And no drone at cruise nor too loud when on it. In the video, I found, and maybe the camera is making it seem so, but the exhaust they used was quite loud. I also know positioning in the car can make a HUGE difference. My RX7 my friend and I stripped down including removing the cat back; was near deafening in the driver's seat, but when selling it to a friend, riding in the passenger seat was shockingly tame and quiet in comparison. If I was blindfolded I would've sworn you put me in a different 7. I definitely will take someone with a loud exhaust over the excessive camber and stretched tires; and definitely over the 'rolling coal' assholes doing it to people in hybrid and shit just because they have a different mindset; I'd like to let a unfixed male cat loose inside their car for doing that to someone. It is such a shitty thing to do. /soapbox
I don't understand why people dislike vids like this?? like these dudes are so positive and just making a video on them helping out a friend/coworker, what's to dislike about that?
On the ride height.. with different spring rates, you shouldn’t have as much static sag. So measuring 2 inches between the oem and aftermarket won’t result in 2 inches of drop..
He absolutely deserves it(from what you guys said he does for you(I don’t personally know) and I’m glad you guys took notice on your own of it. That’s awesome what you guys did and I hope he enjoys it! You guys are great and entertaining! Keep it up!
Those are Fast FS FC04 wheels, Canadian made, good stuff with flow formed rims. That's as close you get to forged heel without paying for forged wheels. Excellent metal quality and holds up in all kind of weather condition. 5x100 is the bolt pattern with 72 mm center bore. Can't put them on an STI as they use 5x114.3 bolt pattern. I believe this particular one is with the 30mm offset, judging by the poke. These were made for the 1998-2005 Audi TT which used the same bolt pattern. BRZ / Impreza in general is between 45-35 mm offset but 30mm is fine if you don't mind the poke. Just some random info. I could be wrong.
stock shifter rattles... I replaced mine with a stainless steel ball and it felt much better (wear gloves on really cold days, or cover the knob with a sock on really hot days).
Just wanna let you guys know. Intakes on these cars do not actually add power when tuned properly. The only thing the cold air intake adds is noise. Many people have proved the stock intake with a silicone suction tube (where it connects to the throttle body) and a drop in filter is all that is needed.
IMOH one of the most cost effective mods you can do is drop the rear suspension control arm chassis mounting points by approx 2.5inches. There is an Aussie company that has a product that is only a couple of hundred dollars and the improvement in grip is fantastic
Awesome job!! I got my 2013 BRZ at the end of 2020...I love it!! I've done only cosmetic mods thus far...only stickers...lol. But this video made me want to look into exhaust and intake mods when I can afford them.
I went with Koni yellows and Tein luxury master lowering springs 15mm drop, adjustable ride comfort shocks hard/soft💫Had so much fun modding my 86, so much I have done, including a HKS Supercharger , nice!
Both wheel setups actually looked great I think! I'm really curious if the addition of an exhaust on this platform like the Hooker you guys put on it makes it feel much quicker on the "buttdyno."
Nitto Invo tires are the best street tire I have ever had. Their grip, great ride, deep tread depth and long lasting qualities are just the beginning... LOL Well worth the money!!!
I loved the video, my frs got into a fender bender and I’ll hopefully change out some parts. I want to add some of the parts you guys put on the brz start with some simple modding.
was i the only one praying the whole video they would paint the brake calipers white lol, either way really nice simple car build i love it Brz's are so smexy
I think you're the only channel on RUclips who I would trust to build a 2020 Supra into a real, properly set up, modified and tested track car. Will you consider it? Even if it takes a year or two for prices to come down? I want to know what it is really capable of, not just how it looks with a widebody and stance mods. Pleeeeaaaaase :)
This was actually super insightful. Good to know. I honestly rather do a few power upgrades then change the look for the most part. Turbo and supercharger seemed vastly overpriced for how little the gains were
Did you actually go through all this to help one of your Techs? I understand parts sponsored and such, But just the fact of volunteering your time and resources to help someone who makes you money on a daily basis is awesome to see.
Did they not toon it for the bolt ons they put on it. That beater flow means nothing if you don't increase the fuel so it dosent run lean. The BRZ is also got a dip in the torque band that can be solved with an ecu toon
Nham deserves it. Hes a beast when it comes to anything cars!
Nam's grin is the best! It's a huge smile that's hiding his real thoughts such as "WTF did you guys do to my BRZ?"
Love this format. Always fun to see someone get their car upgraded as a thank you.
agreed! nice break from the usual stuff.
Judging by the title I was expecting lambo doors
Yeah, my expectations were too high for sure.
"you do the wheel bearings too?" HAHAHAHA Nham is great
@@ulamss5 time
That was a classic and VERY REAL response.
his name is literally on the shirt and you spelled it wrong >_>
He must be watching this from his flip phone so can't blame him for misspelling his name bro jkjk
@@raikoafm702 Bruh for sure its spelled "Nham" and they just made the name tag wrong and he rolled with it lol.
As a brz owner, I wish I had friends like you, Speed Academy !!!
Dov: He bought it because its stock, he likes his stock wheels. DP: Thanks Nham for all your help, we modded the stock car you really liked!
you buy these kinds of cars stock because it's less likely someone thrashed it, if he really wanted his stock wheels it's not hard at all to find someone either selling a set with tires for like $400 or willing to trade for another set.
Lol
Imagine he really didn't know about it before hand. 🤔😂😂😂
Toronto PD: We will start fining loud exhausts.
Speed Academy: We will install an exhaust on a BRZ!
Keep it up guys!
Toronto PD: We will start fining loud exhausts.
Headline: Patient at Toronto hospital who killed a man missing for 2 weeks has fled Canada
Maaaan. To digress from what your actually making reference to. And not to rant. And im not a F*** the police kinda guy. But cmon police need to start enforcing laws and penalize the actual problems in our modern canadian society. Not go for the low hanging fruit buy nabbing the enthusiest holding onto what little bit of their youth that the government allows or the kid who actually enjoys using his hands to wrench on shit and not sit around playing xbox
@@coryhaynes8755 loud =/= fast. If it is reasonable, fine; but some people have 100 dB+ exhausts meant for tracks, not the street. Maybe you need to realize there are other people in the world; I was one of the problem in the past; removed the cat back from a 91 RX-7 convertible; and drove it that way until I sold it to a friend a couple years later.
One day maybe you'll understand. The illegal dB level isn't absurdly low, btw. You can have a rather aggressive exhaust; but again; most people get raspy/tinny exhaust, not clean, smooth, deep tones. They don't consider drone. They don't think too much at all, and I'm not sure why it is such a trend. NASCAR? Fast & Furious?
A deep throaty exhaust does sound good; but maybe I've heard too many tin cans.
I also agree the public servants, police, need to use better discretion and go after violent crimes and theft. A friend was given a ticket for accelerating before the speed limit sign, but it was around 100 yards ahead of them; they paid it already when they told me, as I suggested they fight it in court, as there is no way it would stick. They did it because they drive a BRZ and the exhaust is a bit louder than stock. Of course I wasn't with them, but I've been harassed by police when I was young, car searched several times without due cause but didn't want to escalate the issue even back then as also had a cop pull his gun on me when I was pulling my wallet out of my pocket after he asked me to, outside of the car, like he asked me to be.
The problem is, the wrong people become cops; power hungry, unstable, us vs them mentality, a grudge to bear, etc. instead of being people who truly want to do what is best for the community they are serving and getting paid by.
My point of view is slanted by being in the U.S.A.; but it is an issue of people who feel a false sense of authority any place in the world.
I feel for anyone getting harassed and I'd rather them pass up a loud exhaust and ticket and fine people with 20 degree camber and stretched tires as they are an actual public safety hazard. The capability of the car to do anything is greatly reduced; stop, turn, etc. so an emergency situation pops up and the chances of it becoming a casualty/fatal incident is tremendously increased. If you want that kind of car, it is a show car. You trailer it to events, you don't drive it on the street. Have 45 degree camber and 155 tires on 12" rims if you could make it happen for all I care, just stay off the public roads with it; same with aggressive drivers needing to chill the fuck out and pay for some track time. You hear actual race drivers say they drive slow on the streets, because after the shit they see at 200 mph; being crazy on public roads in a normal seat belt and cars that aren't as safe doesn't seem fun or well thought out course of action..
So some police can go fuck themselves, I've met good ones too; but just stop, think, and be responsible. To your own safety and others. To being decent to those around you. Do you want a 180 dB sound competition car booming down your street at night? Next to you at a stop light? Probably not. Nor do you want one that is capable of 95 dB rattling your rearview from several cars back. Same goes for those loud exhausts. It isn't for the streets; even though driving through tunnels and under overpasses is beautiful to the ears; been there, get it, but realized later on it was pretty selfish of me, but being a teenager I wasn't thinking of the bigger picture. They have manual and electric actuators to bypass exhaust for shows and track events; if you have 2k for an exhaust, you have the money to make it both loud and quiet.
That stainless kit actually doesn't seem so loud, just a nice-sounding stainless setup. It's much more about if it's a good sound than a loud one with me, and that doesn't look like it has a lot of restriction, either, so that's about my ideal for most things. (I do like to drive with music, and almost always with windows down, so I just want it to sound *good.* For my daily, I didn't really need a new exhaust, so I just cut out a bit of extra restriction and sprung for a nice stainless pencil tip, made everything sound much more pleasing to me. It can actually do wonders if you choose well.
@@OllamhDrab watched a video sometime in the last few weeks dealing with exhaust, pulses, velocity, etc; and it is actually interesting how small some race exhausts are. I feel perception is skewed for a few reasons on things like large exhausts; american racing culture is heavily inspired by drag racing and nascar; then the F&F series which for me honestly is a shit show of pure child fantasy of what fast cars are like, not written by someone who knows anything ... I love RX7s, and just the one clip from I'm guessing the first move had me throw my palm to my face so hard I got a concussion :p
My friend's BRZ is not too loud, I get to drive it now and then; shame its an auto, but it can get 45 mpg highway cruising average on 100 mile round trips. It is deep, throaty, and a bit loud. I can hear the rumble at idle of the car slightly inside the house with windows closed; but its not obnoxious. The got it from carmax with 700 miles on it, and I haven't checked to see if the previous owner changed anything; I know it isn't UEL headers, no burble, talked them into doing that one day, but I had one from 2017, theirs is 2019, and I'm pretty sure this exhaust is louder and more aggressive, but in a very good way. I love a deep/low tone for idle. And no drone at cruise nor too loud when on it.
In the video, I found, and maybe the camera is making it seem so, but the exhaust they used was quite loud. I also know positioning in the car can make a HUGE difference. My RX7 my friend and I stripped down including removing the cat back; was near deafening in the driver's seat, but when selling it to a friend, riding in the passenger seat was shockingly tame and quiet in comparison. If I was blindfolded I would've sworn you put me in a different 7.
I definitely will take someone with a loud exhaust over the excessive camber and stretched tires; and definitely over the 'rolling coal' assholes doing it to people in hybrid and shit just because they have a different mindset; I'd like to let a unfixed male cat loose inside their car for doing that to someone. It is such a shitty thing to do.
/soapbox
I don't understand why people dislike vids like this?? like these dudes are so positive and just making a video on them helping out a friend/coworker, what's to dislike about that?
Probably because of how Canadians pronounce "Celica." That's my only guess.
Nam is an absolute Mvp
Well deserved props to the man
...wait Nam is Man backwards hes a beast
On the ride height.. with different spring rates, you shouldn’t have as much static sag. So measuring 2 inches between the oem and aftermarket won’t result in 2 inches of drop..
Correct!
So you measure it siting on the tire like the fender gap?
You don't adjust the ride height with the bottom section - you do so by the lower spring perch.
You guys rock, thanks for picking a BRZ. It's been a while and it's such a good base to pimp.
thanks for returning a favor to a guy that really deserves it. faith in humanity restored.
Wish I had the cash to modify my 86! Unfortunately our racecar Miata depleted the car fund...
I love the stock "boring" shift knob! quite possibly the best from the factory knob I have ever had!
Very nice. A white BRZ is an excellent choice. You already semi-pimped mine so thank you !
Needs more atrocious colors, TV screens and Subs for proper pimpage!
Nice quick build and going to a great guy, ya did good :D
You forgot the fish tank and chandeliers!
I didn't see a popcorn maker or a cotton candy machine there either.
And a hot tub!
Generosity is always is really cool thing to watch. It's so awesome that all those companies came along side of you guys to help out
He absolutely deserves it(from what you guys said he does for you(I don’t personally know) and I’m glad you guys took notice on your own of it. That’s awesome what you guys did and I hope he enjoys it! You guys are great and entertaining! Keep it up!
You guys are awesome!!!! Love this! This is what I want to do for my friends when I can afford it.
Gotta say, those hyperlapses were really well done
Love that you guys did this for him, kills me you didn't change the rotors too, lol.
@speedacademy and coffee is how I start my mornings
You're good blokes. Nicely done.
Those are Fast FS FC04 wheels, Canadian made, good stuff with flow formed rims. That's as close you get to forged heel without paying for forged wheels. Excellent metal quality and holds up in all kind of weather condition. 5x100 is the bolt pattern with 72 mm center bore. Can't put them on an STI as they use 5x114.3 bolt pattern. I believe this particular one is with the 30mm offset, judging by the poke. These were made for the 1998-2005 Audi TT which used the same bolt pattern. BRZ / Impreza in general is between 45-35 mm offset but 30mm is fine if you don't mind the poke. Just some random info. I could be wrong.
i wanna say the torque spec on my 06 forester for the nuts on the rear is ~14lbft. drain plugs are tighter....
Stock shifter looked better IMO. :)
stock shifter rattles... I replaced mine with a stainless steel ball and it felt much better (wear gloves on really cold days, or cover the knob with a sock on really hot days).
needs a giant dildo shifter lmao jk
daiheadjai buy a 8 ball
@@dhj-i8g I bet having your hand on a sock over a slippery metal ball feels SOOO Much better than the OEM knob.
Just wanna let you guys know. Intakes on these cars do not actually add power when tuned properly. The only thing the cold air intake adds is noise. Many people have proved the stock intake with a silicone suction tube (where it connects to the throttle body) and a drop in filter is all that is needed.
17:45 - Is that an abandoned 911 at NV Auto? I'll be right over... lol
Great update on a sweet ride for Nham! Cheers
I can feel those roads by just watching. It hurts my soul.
Nham's firm grasp on the base of his shift lever got me like...🤔
Nahm was stroking it😂
nice car! would be nice to make an episode fixing those front bumper/hood/side panels gaps :D
Love the bronze on the wheels it’s a great look, the shift knob and air intake look great too. Good job with the choices guys.
That exhaust sounds v close to stock surprisingly. Prob much louder tho
That white TME Evo was beautiful 😍
Thanks.
Its good to see a classic like Hooker making import parts
IMOH one of the most cost effective mods you can do is drop the rear suspension control arm chassis mounting points by approx 2.5inches. There is an Aussie company that has a product that is only a couple of hundred dollars and the improvement in grip is fantastic
This is such an awesome and kind gesture.
I actually love what you guys did here mate
Awesome job!! I got my 2013 BRZ at the end of 2020...I love it!! I've done only cosmetic mods thus far...only stickers...lol. But this video made me want to look into exhaust and intake mods when I can afford them.
This is my favorite video yet from you guys
"You'll never lose a 10 mill again bro." I don't know how many 10 mill. sockets that I've lost.
His smile on the reveal says it all.
Really nice of you guys, and I agree, "gentleman setup" is the way to go on these garbo gta roads.
I went with Koni yellows and Tein luxury master lowering springs 15mm drop, adjustable ride comfort shocks hard/soft💫Had so much fun modding my 86, so much I have done, including a HKS Supercharger , nice!
Dave has that old man face app going on 24/7. The OG
Quick edit: modify the Element!
That's it. You've forced my hand. Now you'll get what's coming to you... *hits subscribe*
The front top camber bolt looks aftermarket, when installing coilovers you should put the stock camber bolt back in.
Very cool! This is why I love this channel, good bunch of guys.
The wheels look incredible. Nice work guys.
Both wheel setups actually looked great I think! I'm really curious if the addition of an exhaust on this platform like the Hooker you guys put on it makes it feel much quicker on the "buttdyno."
POV: you live in Hamilton ON, are looking at a BRZ (literally today), and you just find this channel
Nham is great, knows his stuff. He should get his own channel
Nam is an awesome guy and he deserves this!
fellow Canadians, subbed!! :)
When doing height-adjustment like that, you must take diffrent droop/springrate in consideration...
just mounted my second set of invos they are awesome at tmp and one of the best tires in the rain imo
Nice cold revs
The bronze on white was such a good idea!! 🤍
Nitto Invo tires are the best street tire I have ever had. Their grip, great ride, deep tread depth and long lasting qualities are just the beginning... LOL Well worth the money!!!
I was wondering if those odd looking things are actually grippy. I seem to mostly run in the dry around here with occasional hydroplaning hazards. :)
@@OllamhDrab I ran 285 rears on my '13 Mustang GT and they grip great!!
There’s like 1” wheel well gap at 1:26. Hardly in the clouds. 🙂
I loved the video, my frs got into a fender bender and I’ll hopefully change out some parts. I want to add some of the parts you guys put on the brz start with some simple modding.
was i the only one praying the whole video they would paint the brake calipers white lol, either way really nice simple car build i love it Brz's are so smexy
I would have never picked bronze with white, but it looks fantastic.
Yo I'm really feeling those rims man those are HOT I love that color it's LIKE gunmetal.
konig freeforms radium bronze 18x8.5 WANT WANT WANT
What a trip watching this, you guys are in my neighbourhood!!
I think you're the only channel on RUclips who I would trust to build a 2020 Supra into a real, properly set up, modified and tested track car. Will you consider it? Even if it takes a year or two for prices to come down? I want to know what it is really capable of, not just how it looks with a widebody and stance mods. Pleeeeaaaaase :)
to be honest, i think Nham would be more happy with a wheel bearing replacement than the pimp my ride treatment lol
First video I've seen from you guys and i have subscribed. It's cool to see you guys are in Ontario.
This was actually super insightful. Good to know. I honestly rather do a few power upgrades then change the look for the most part. Turbo and supercharger seemed vastly overpriced for how little the gains were
Awesome! Would like to see any other stages on this ride. I would not mind working and earning my pimpage...
You guys deserve so many more subs/views
Did you actually go through all this to help one of your Techs? I understand parts sponsored and such, But just the fact of volunteering your time and resources to help someone who makes you money on a daily basis is awesome to see.
Ofcourse we did!
Did they not toon it for the bolt ons they put on it. That beater flow means nothing if you don't increase the fuel so it dosent run lean. The BRZ is also got a dip in the torque band that can be solved with an ecu toon
Well deserved for hard working Nham!
The pimp my ride videos are my favorites 🤩
He didn't seem too happy with the changes :)
I laughed at the 10 whp from the grim speed intake. Yeah no. Maybe on supremely perfect conditions and on a really generous dyno 😂
shark fr-s isn't tuned either lol not good
Header and exhaust kit from borla and an under pulley kit would set it off
Hey whats the song @10:28 and Outro? Would love to know! Btw great one day build
Who's hatch is that?? 17:43 Looks like someone got a sedan and the hatch trunk to do it and that's really sick
great work guys love it .. im a big fan of the brz, and 86,,.
Good old bumpy Hamilton roads! You guys should hold a cars n coffee at the Speed Academy shop, I'm sure a lot of us local guys would make it out
I‘d cry but Nam doesn‘t cry :D
Nam is such an awesome dude
Well deserved Nam!
Konig wheel is the new cheap and cheerful option and they do look good
This was AWESOME pls do more of this
such a heartwarming video!
I prefer the original shift knob. The black color doesn't match the original shift gear lever whose black is lighter.
Im right close to hamilton and have a great 5 cylinder golf that needs some mods, hit me up
Shoulda done an UEL manifold for him too, that exhaust reveal was underwhelming lol
How many product plugs can we fit in one video?
I still loved it and it is practical modifications.
What wheels were on at the beginning of the video? Looking for new wheels and I actually love how it looks!
Can you teach us about that Element in the parking lot? Oh also, great gift that was well deserved.
It's the best car ever made. That is all.
@@ItsTheVarietyShow I would have to agree. Mine is at 224k miles and going strong. So much space for hauling whatever you want. Thanks Honda.
There's one in my neighborhood that has the Subaru rumble, maybe unequal length headers?
Was a header already done? Because that and a tune are the biggest things on these cars.
Beautiful wheels guys!
Well deserved, Nham. Enjoy
So you guys just did a pad slap with resurfacing the rotors or upgrading them..?
Nham seemed unimpressed. He's definitly deserving of the thanks.. teamwork makes the dream work!!
Douglas Feeley that’s Nam when he’s super stoked. You should see him when he’s disappointed 😂
@@speedacademydave add a super charger and he may give you a crisp high five! 🤣🤣🤣