Just cycling the slide a few times will remove finish from the barrel, both along the length and at the hood. After a few hundred rounds it will be very worn. It looks like the same finish as the USW. I plan to either parkerize the barrel, or cerakote it. Either finish would hold up longer than B&T’s. I notice that the Sphinx has a lot less wear with many more rounds through it. Not a big issue. I love the B&T. It’s been discontinued. B&T will be producing their own pistol as a striker fired weapon. I just bought a second one at a sale price. It’s going to stay in the bag as an investment. I have several 9mm’s in HK, Sig, CZ, FN. The MK II always goes to the range.
I have many b&t firearms..sphinx went out of business bnt bought the tooling n made there own version off off sphinx..both are essentially a high end cz 75..w out cz there would be alot of guns never made..love the apc9 and my mark 2 and my apc 223 and 308....
RMR is always the answer. If you are buying an expensive gun, pay the extra for the Trijicon. Orange followers on the mags would be nice. For the money, you should get 3 mags and the other grip panels IMHO. The case is a nice touch, but do you really use it? Mine guns either are in a holster, in a range bad with other guns or in the safe. Thanks for the comparison, very helpful,
Problem is, the slide cut was only made for the Shield rms. But, the Holosun 407K and 507K are the same footprint and I installed the 407K. Only needed to file down the silver dowels that come with the MKII from 4mm to 3.8mm. The Holosun fit perfectly after that.
The warning come in all TUV (EU) market firearms. They are required in English and market language. B&T probably didn't know they weren't needed in the US.
So, is it possible to swap the slide from the MK2 onto the Sphinx and using the Sphinx barrel and spring? I carry my Sphinx but am interested in the possibility of adding the ability to carry an optic on it.
Possibly but I'll use my 'do at your own risk' disclaimer. Perhaps reach out to B&T to get their take. They may say 'yes it will fit' however they will state they accept no responsibility. But if you get the B&T just for the slide, why don't you just carry the MKII instead of the Sphinx?
Excellent close up up comparisons of truly unique handguns. KRISS SPHINX SDP, B&T MKII, and PHOENIX FUSION in different variants. Wonder if any significant changes were done to the interior? PEACE
I like my Mk II a lot - I would assume any holster designed for a Sphinx SDP will work, but what do you use? Also I like the manual safety shelf as you mentioned, but I would like the on/off to be a little more definitive. Maybe a stronger detent spring or something. Have you given that any thought? I know it will not be like my Ed Brown safety, but something a little tighter would be very nice.
Yes, a Sphinx SDP holster will work, however you would need to open up the bottom of the holster to accommodate the threaded barrel (at least in the holster I have). Yes, perhaps a stronger detent spring would work on the safety, I know a few other folks had mentioned that more of a tactile lock/unlock feel would be preferred.
Thank you for this great video. I just picked up mine today. What would you recommend adding to this beutiful pistol to take it up a notch? BTW I was told Trijicon doesnt have a green dot for this pistol, true? They sugest that I get a HE507C-GR-X2 from Holosun
Only thing I added was the Holosun and it's a perfect fit. The only thing you will need to do is file down those stainless pins that came with the MKII. They are 4mm now, you need to take them to 3.8 or less to get the Holosun to fit properly. Congrats on the pistol!
@@mich5167 This is the compete kit. www.modernweaponsystems.com/modern-weapon-systems-sphinx-enhanced-trigger-kit-w-trigger-return-spring-sdp-compact-compact-duty-and-compact-alpha/
From what I understand, B&T bought the remaining inventory and patents from Sphinx and Sphinx went bankrupt. Phoenix was founded by the owner of Sphinx. Hence the similarities between the three brands. This is what I understand, but not stating it's 100% accurate.
@@MrMravery what I noticed is that the B&T has the same hammer of the latest Phoenix Fusion pistols rroduction. Yes, Phoenix was founded by the owner of Sphinx, and pobably they holds the Sphinx patents after they left Kriss.
Forgive my ignorance, I’m new to the firearm hobby, ... but what is the relationship between the B&T and the Sphinx SDP? Aren’t they the same guns? Does B&T just soup up existing products??
From what I understand, Sphinx went bankrupt and B&T bought the remaining inventory and tooling. They then released the MKII based on the inventory they acquired.
So, I'll answer but it won't really be an answer. The USW is a beast all by itself as it's an SBR. The MKII is an excellent pistol and an upgrade from the Sphinx with the threaded barrel and the cut for an optic. The Sphinx overall fit and finish is significantly better than the other two. So, what is 'better' would need to be determined by the specific use.
Not really. You can take the folder off (it's actually off when you buy it as a pistol because once you add it, it becomes an SBR) but the frame and slide are different. Internals are the same.
Isn't it essentially a CZ 75? I know the mags are the same, and the slide rails are modeled after CZ 75. I thought virtually everything is interchangeable
Any holster that would fit the Sphinx SDP would work, however you would need to open up the bottom of the holster to accommodate the threaded barrel (at least on the one I have anyway).
Good to know. What’s the best fiber optic front sight for it and is the spring kit straight forward to install? And thank you again for all your info!!!
Just a tiny piece of constructive criticism you may want to consider if you plan on making any more videos: Find a location that is free of repeatedly chirping birds. I really wanted to hear your thoughts on these guns, but I could only made it about half way before I couldn’t take it anymore.
So does the b&t mark 2 use cz 75 mags? Also will it shoot the federal 115 if the springs and ehat not isn't messed with? Like right out of the box will it shoot them?
Yes, it should use the 17 rd CZ mags. Yes, out of the box, 115 Federal was fine, it was because I swapped out the lighter hammer spring that I got light primer strikes on a couple of rounds.
listen i am former US Army Military police and i have no ide what it is that makes people in general like guns i am an expert but if you don't sow it your likely not to know it IE live by thee gun Die by what skittles no bullets what do you need three 3 guns for no one needs 1 and you have 3
Just cycling the slide a few times will remove finish from the barrel, both along the length and at the hood. After a few hundred rounds it will be very worn. It looks like the same finish as the USW. I plan to either parkerize the barrel, or cerakote it. Either finish would hold up longer than B&T’s. I notice that the Sphinx has a lot less wear with many more rounds through it. Not a big issue. I love the B&T. It’s been discontinued. B&T will be producing their own pistol as a striker fired weapon. I just bought a second one at a sale price. It’s going to stay in the bag as an investment. I have several 9mm’s in HK, Sig, CZ, FN. The MK II always goes to the range.
You went over exactly everything I wanted to see between the two , down to the frakenslide swap. Thank you.
Glad that you liked the video! Thank you for watching.
I have many b&t firearms..sphinx went out of business bnt bought the tooling n made there own version off off sphinx..both are essentially a high end cz 75..w out cz there would be alot of guns never made..love the apc9 and my mark 2 and my apc 223 and 308....
Great review, super informative answered a bunch of questions. Thanks
You are welcome! Glad the video was informative.
RMR is always the answer. If you are buying an expensive gun, pay the extra for the Trijicon. Orange followers on the mags would be nice. For the money, you should get 3 mags and the other grip panels IMHO. The case is a nice touch, but do you really use it? Mine guns either are in a holster, in a range bad with other guns or in the safe. Thanks for the comparison, very helpful,
Problem is, the slide cut was only made for the Shield rms. But, the Holosun 407K and 507K are the same footprint and I installed the 407K. Only needed to file down the silver dowels that come with the MKII from 4mm to 3.8mm. The Holosun fit perfectly after that.
Good job Mark. Thank you for the review.
The warning come in all TUV (EU) market firearms. They are required in English and market language. B&T probably didn't know they weren't needed in the US.
Thank you for that info.
So, is it possible to swap the slide from the MK2 onto the Sphinx and using the Sphinx barrel and spring? I carry my Sphinx but am interested in the possibility of adding the ability to carry an optic on it.
Possibly but I'll use my 'do at your own risk' disclaimer. Perhaps reach out to B&T to get their take. They may say 'yes it will fit' however they will state they accept no responsibility.
But if you get the B&T just for the slide, why don't you just carry the MKII instead of the Sphinx?
Can we get more videos on the MKii it’s not many floating around and I enjoyed your content 🔥🔥
Sure, let me see what I can do.. stay tuned :)
@@MrMravery I appreciate that, definitely gained a new sub!
The cut-out groove on the barrel is for an O-ring to keep the suppressor from coming loose. A feature stolen from HK Tactical
If so, they should have included the O-ring.
I have the whole MK2 hammer installed in my Sphinx
Excellent!
Excellent close up up comparisons of truly unique handguns. KRISS SPHINX SDP, B&T MKII, and PHOENIX FUSION in different variants. Wonder if any significant changes were done to the interior? PEACE
Thank you!
I like my Mk II a lot - I would assume any holster designed for a Sphinx SDP will work, but what do you use? Also I like the manual safety shelf as you mentioned, but I would like the on/off to be a little more definitive. Maybe a stronger detent spring or something. Have you given that any thought? I know it will not be like my Ed Brown safety, but something a little tighter would be very nice.
Yes, a Sphinx SDP holster will work, however you would need to open up the bottom of the holster to accommodate the threaded barrel (at least in the holster I have). Yes, perhaps a stronger detent spring would work on the safety, I know a few other folks had mentioned that more of a tactile lock/unlock feel would be preferred.
Thank you for this great video. I just picked up mine today. What would you recommend adding to this beutiful pistol to take it up a notch? BTW I was told Trijicon doesnt have a green dot for this pistol, true? They sugest that I get a HE507C-GR-X2 from Holosun
Only thing I added was the Holosun and it's a perfect fit. The only thing you will need to do is file down those stainless pins that came with the MKII. They are 4mm now, you need to take them to 3.8 or less to get the Holosun to fit properly. Congrats on the pistol!
Oh, and add a Sphinx hammer spring. The pull lightens up and it's lime glass.
Hey can you link the hammer spring you recommend?
@@mich5167 This is the compete kit. www.modernweaponsystems.com/modern-weapon-systems-sphinx-enhanced-trigger-kit-w-trigger-return-spring-sdp-compact-compact-duty-and-compact-alpha/
I wonder why they chose not to utilize a decocker?
Thanks for the video, what is the blue tool you are using to remove the slide stop?
It's a car trim removal tool for auto bodywork. They are plastic and come in handy. Bought on Amazon (3 piece set) for like 6 bucks.)
@@MrMravery thanks
The B&T MK II visibly a Phoeniex Fusion (great pistols) with some cosmetic changes....
From what I understand, B&T bought the remaining inventory and patents from Sphinx and Sphinx went bankrupt. Phoenix was founded by the owner of Sphinx. Hence the similarities between the three brands.
This is what I understand, but not stating it's 100% accurate.
@@MrMravery what I noticed is that the B&T has the same hammer of the latest Phoenix Fusion pistols rroduction. Yes, Phoenix was founded by the owner of Sphinx, and pobably they holds the Sphinx patents after they left Kriss.
Nice review.
Thanks.
Forgive my ignorance, I’m new to the firearm hobby, ... but what is the relationship between the B&T and the Sphinx SDP? Aren’t they the same guns? Does B&T just soup up existing products??
From what I understand, Sphinx went bankrupt and B&T bought the remaining inventory and tooling. They then released the MKII based on the inventory they acquired.
Late comment but which pistol do you still prefer between the Sphinx and B&T?
Guess I'd say the B&T because of the Optic mount.
What's your opinion and favorite of the 3 ?
So, I'll answer but it won't really be an answer. The USW is a beast all by itself as it's an SBR. The MKII is an excellent pistol and an upgrade from the Sphinx with the threaded barrel and the cut for an optic. The Sphinx overall fit and finish is significantly better than the other two. So, what is 'better' would need to be determined by the specific use.
are Sphinx SDP still in production??
usa made yes but no swiss made pistols.
where did you find the front sight for the sdp? my mkII should be here next week
Modern Weapon Systems
www.modernweaponsystems.com/modern-weapon-systems-mws-sphinx-sdp-compact-green-fiber-front-sight-standard/
@@MrMravery thank you very much. It will go well with my ghm 45.
@@3LGAutodetail be very careful removing the old one. BT used high temp red loctite on the threads to the set screw.
@@MrMravery Thanks for the advice.
Where can I get a different set of sights for my mk II? Also, does the Jolie in 507 fit the same footprint?
Any replacement front sight for Sphinx should fit the MKII, it's the same gun.
Can you put the mkii safety parts in the uswa1?
Is it possible to take off the folder and assembly from the USW and essentially make it a MKii?
Not really. You can take the folder off (it's actually off when you buy it as a pistol because once you add it, it becomes an SBR) but the frame and slide are different.
Internals are the same.
Does anyone know where I can find holster for this B&T MK-II??? Does it fit in a SPHINX SDP holster?
Are the Sphinx SDP trigger the same as the BT MK2?
I have an SDP Compact holster and it fits...but....the bottom of the holster works need to be opened up to account for the threaded barrel.
@@nicoz8796 yes...
@@MrMravery Thanks for the fast reply Mark!!
Isn't it essentially a CZ 75? I know the mags are the same, and the slide rails are modeled after CZ 75. I thought virtually everything is interchangeable
Do Usw e Sdp have compatible parts?
Some, like the trigger parts and springs, also the grip panels.
hey there, would you happen to know if they were holster compatible?
Any holster that would fit the Sphinx SDP would work, however you would need to open up the bottom of the holster to accommodate the threaded barrel (at least on the one I have anyway).
Do you know what red dots will work on it? The Detlapoint was a no go but shares a shield footprint.
They only state that the Shield RMS will work. However I have seen an image of a Holosun 507 on it. Not sure if they had to modify anything.
Thank you. I’m going to go try the upgraded springs / firing pin you mentioned as well.
@@vonhova careful with removing the sight post screw. B&T confirmed that they used Red Loctite on those threads. Very hard to remove.
Good to know. What’s the best fiber optic front sight for it and is the spring kit straight forward to install? And thank you again for all your info!!!
@@vonhova Modern Weapons Systems has the Sphinx fiber optic and spring kit. They have a video tutorial for installing the springs.
Just a tiny piece of constructive criticism you may want to consider if you plan on making any more videos: Find a location that is free of repeatedly chirping birds. I really wanted to hear your thoughts on these guns, but I could only made it about half way before I couldn’t take it anymore.
Thank you for the feedback!!
So does the b&t mark 2 use cz 75 mags? Also will it shoot the federal 115 if the springs and ehat not isn't messed with? Like right out of the box will it shoot them?
Yes, it should use the 17 rd CZ mags.
Yes, out of the box, 115 Federal was fine, it was because I swapped out the lighter hammer spring that I got light primer strikes on a couple of rounds.
@@MrMravery I have only the 21 round mags with the bigger base pad. Will they work in it? Great video by the way
I believe that they should. Any CZ75 or comparable (maybe also Canik etc) 17 rds or larger. The 15 rds won't lock in.
B&T USW sells a 30rd/mag for the B&T MKII. Available at EuroOptic and GunMag Warehouse.
Mk II = mark 2 lol
suisse qualite
That bird is so annoying I can't finish the video!
That bird is annoying. Do your video somewere else.
Nothing more than a glorified CZ. Not impressed.
Yes, other than quality. The Sphinx is levels above the CZ in quality, BT a few levels.
listen i am former US Army Military police and i have no ide what it is that makes people in general like guns i am an expert but if you don't sow it your likely not to know it
IE live by thee gun Die by what skittles no bullets what do you need three 3 guns for no one needs 1 and you have 3