As someone who's spent 25 years doing component level troubleshooting (and more years as a ham radio hobbyist), I can say that you did some really good detective work.
Thank You for this absolute great lesson. I don´t have this problem in my Yaesu FT-1000MP MARK-V Field yet, but when it will came I just know what to do. All the best 73 to You!
Another awesome diagnosis and repair Peter. Thanks for the video. I do have to say that you are a much braver man than I am seeing you resting the corner of that heat sink with the fins hovering over the top of the speaker cone like that. 😲
The ft1000mp was my first big step in repair radios. Could follow you easily this time. Thanks for sharing it inspiring me every time again to do more repairs.
Another great repair, Peter. I learn something new every time i look at your videos. I am impressed to see how you can find these broken parts in the radio. /3 Asle
Another great fault finding diagnosis and repair...... your a wizard...... are you sure you don't want to move to New Zealand haha...... not much covid and lots of radios to repair hahaha....... awesome video Peter , I so enjoy your repairs, reviews, and also all the tips and tricks , and lets not forget the great balun series..... Thank you , you are a great blessing to the ham radio community .
@@lordjaashin wasn't inviting you so you can stay just where you are...... and our lockdowns are short and sharp and we get covid under control fast...... Fascist state lol.... you don't have a clue do you lol
@@cookiebeariscool wasn't coming to your fascist island so whether you're inviting or not is irrelevant. citizens should shut themselves in when masks work just as well. class differences between vaccinated and unvaccinated citizens? would you like to know more? look at the similarities between your government and Federation from starship troopers movie.
Great job Peter. I have had the same issue in a IC-756PRO3, warn PA unit in RX with bias in as well. It was a leakage voltage in RX/TX switch stage.Thanks for another great video, stay safe my dear friend. 73s Pasquale IW0HEX
Man you are definitely good at finding the little things that drive most of us crazy. Definitely lean more every time I watch. This is the 3ed time I've watched an leaned something new. Keep up the great work 👍👍👍
Another great video, Peter. I have found that most hams dabble somewhat in electronics. I guess it's just part of ham radio. But most hams cannot repair their own radios unless they are a working technician. Your troubleshooting techniques are par to none. You always seem to go to the correct spot for testing. 73 from W Rusty Lane K9POW in eastern Tennessee
I really like your videos! I also like in case of german people explain something in english, I like the detailed explanation and the accent too! :) By the way, I was able to follow the investigation and understand almost every steps. But it is not clear why the RX was lost only after transmitting?
Nice vid, Peter. Hope you are doing fine. I had a backlog in watching your videos, but now i am up to date. FT-1000 is always complex to work on, but worth it to save a good radio. So thanks once again for your good work. 73 de Olaf, hab eine gute Zeit!
So those built in self biased transistors are digital switches? I always wondered about them. Thanks for the Saturday repair download Peter. Have a great weekend.
Peter all your videos are great. The earlier ones on Baluns in (4 parts a few years back) were extremely good and fundemental. You did one 6 months ago on replacing the Icom7300 final mosfets. I just wondered where you got those from? I only ask because other than eBay (hmm) I am struggling to find them. David
Had me a Yaesu 757gxII had receive issues and such. Was leaky diodes. Put me in some 1N4148 and fix it good. Did you use Genuine replacements or did you use some equivalent for the diode? Good video.
Hi Peter. Have been following your videos for sometime. I plan on getting into the radio restoration and repair aspect. Could you please post more videos on what type of test equipment you would need to repair and restore both tube and S/S radios, and how they interact with each other. Thanks Hart va3kis.
Hi Peter great video as always I have a radio I would like to have repaired can you advise on how to get in touch please I am based in the UK and would like to ship to you Kind regards Craig
Love to send you my MK2G. Works for 10 min. Then we only have 160. Probably relaying. I Can't see that well or I'd go for it. Be nice to be able to get a New relay board but I'm sure know one makes them.
hi I was going through your channel I came cross this video, I have FT-2000 with very odd behavior which I cant describe, how can I share you the video's of my radio behavior? so if you can help me to solve it.
Hallo Peter; Können Sie mir eine Referenz für ein magnetisches Induktionsglaselement geben, um das Element im REED RL6414-Relais zu ersetzen. Ist 10 x 14 mm in Ordnung? Danke im Voraus 73's SEB
new to your channel and must say the info helps me understand stuff better. sorry to peter but i am trying to reach out to anybody who can help me i have a old icom ic-726 and the display has gone and was wondering if any one has a old radio about them spares or repair or be able to point me in the right direction to get one. (uk based) thanks
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
Your English is so crisp and precise that your videos are fully watchable at 2X real time, with no loss of comprehension. Very nice.
glad to hear that! Thank you
As someone who's spent 25 years doing component level troubleshooting (and more years as a ham radio hobbyist), I can say that you did some really good detective work.
Very nice demostration of your troubleshooting skills Peter. I enjoy these type of videos. thanks for sharing and 73
Hi Buddy 😎
Hi Buddy my friend! Thanks for your feed back. Take care 73
Another successful operation from the radio surgeon. Beautiful out come on a very odd problem!
Thank you
Thank You for this absolute great lesson. I don´t have this problem in my Yaesu FT-1000MP MARK-V Field yet, but when it will came I just know what to do. All the best 73 to You!
Thanks again Peter for your great work! It's truly appreciated! You're a natural teacher.
Thank you!
Another awesome diagnosis and repair Peter. Thanks for the video. I do have to say that you are a much braver man than I am seeing you resting the corner of that heat sink with the fins hovering over the top of the speaker cone like that. 😲
Thank you. The speaker thing looks in the video more horrible as it is in reality..
Another great video Peter. Its great to see you back making video's this year. 73s Ian M5AXA
Thank you
The ft1000mp was my first big step in repair radios. Could follow you easily this time. Thanks for sharing it inspiring me every time again to do more repairs.
This is the second time i have seen you replace this diode on the same radio all be it quite a few years back .Thanks for sharing.
I saw a very easy explanation and great skills! It would be very helpful as 1 have the same model.
I love your explanations you are a very good teacher. I bet a lot of students could learn a lot from you. Great job as always.
Another great repair, Peter. I learn something new every time i look at your videos. I am impressed to see how you can find these broken parts in the radio. /3 Asle
Thanks for feed back
Another great fault finding diagnosis and repair...... your a wizard...... are you sure you don't want to move to New Zealand haha...... not much covid and lots of radios to repair hahaha....... awesome video Peter , I so enjoy your repairs, reviews, and also all the tips and tricks , and lets not forget the great balun series..... Thank you , you are a great blessing to the ham radio community .
no thanks. new zealand has become fascist state with crazy shutdowns and lockdowns
@@lordjaashin wasn't inviting you so you can stay just where you are...... and our lockdowns are short and sharp and we get covid under control fast...... Fascist state lol.... you don't have a clue do you lol
@@cookiebeariscool wasn't coming to your fascist island so whether you're inviting or not is irrelevant.
citizens should shut themselves in when masks work just as well. class differences between vaccinated and unvaccinated citizens? would you like to know more?
look at the similarities between your government and Federation from starship troopers movie.
@@lordjaashin keep it pro.. nobody asked you something
Thank you nothing wrong to move to New Zealand. Let's see where to find a lab lol
Great job Peter. I have had the same issue in a IC-756PRO3, warn PA unit in RX with bias in as well. It was a leakage voltage in RX/TX switch stage.Thanks for another great video, stay safe my dear friend. 73s Pasquale IW0HEX
Yes it always happens again very tricky fault Thanks and stay safe too my friend 73
Really appreciate you explaining your process and taking the time to take us along and make a video. Thanks!
Thank you
Wow Peter, your troubleshooting technique is superb. Nice job on finding the defective diode.
Thanks for feed back
Really enjoy your explanations & troubleshooting methodology.
Thanks for sharing!
Thank you
I had one of these FT-1000 Mark-V a few years ago, nice radio with lots of features...
yeah still a nice radio..
Bravo Peter,.. Saving another Classic Superhet,..😊
Excellent repair video as always Peter. Enjoyed the diagnosis.
Thank you
Man you are definitely good at finding the little things that drive most of us crazy. Definitely lean more every time I watch. This is the 3ed time I've watched an leaned something new. Keep up the great work 👍👍👍
Thanks for feed back
Another great video, Peter. I have found that most hams dabble somewhat in electronics. I guess it's just part of ham radio. But most hams cannot repair their own radios unless they are a working technician. Your troubleshooting techniques are par to none. You always seem to go to the correct spot for testing. 73 from W Rusty Lane K9POW in eastern Tennessee
Hi Peter,
Nice find of the defective diode. The radio now works normally. Stay safe. 73 WJ3U
Thank you
What a jolly chap. God bless you sir.
Great job Peter, but you made me nervous putting the big heatsink so close to the speaker!
Cheers G4XCQ
Thank you. The speaker thing looks in the video more horrible as it is in reality..
Interesting to watch. One small component can cause so much trouble.
Thanks Peter, I've stored that bit of info in my kit bag for future troubleshooting! 73 - Dino KLØS
Yes always good to have a very well organised fault archive.. Thanks for feed back! 73
Nice repair and amazing analysis Peter ! I like so much your technich. 73's and congrats !
I really like your videos! I also like in case of german people explain something in english, I like the detailed explanation and the accent too! :)
By the way, I was able to follow the investigation and understand almost every steps. But it is not clear why the RX was lost only after transmitting?
Nice vid, Peter. Hope you are doing fine. I had a backlog in watching your videos, but now i am up to date. FT-1000 is always complex to work on, but worth it to save a good radio. So thanks once again for your good work. 73 de Olaf, hab eine gute Zeit!
Thanks for Feed Back! Hoffe alles okay bei dir hatte dich schon vermisst. 73
@@TRXLab Alles gut, Peter..ich hatte so viel um die Ohren auf QRL. Ich freu´mich auf nächste Video!
@@OleF112 ah prima dann bin ich ja beruhigt.
Bravo Peter, thanks for sharing !
Thanks
I'm watching you from Friedrichshafen today (on holiday) instead of the UK. Rod G8DGR
Ah have a good time in Friedrichshafen. Thanks for watching
Thanks for posting Peter another great video thank you
Thank you
Thank you for another very clearly explained video, you make it seem easy. Your are great teacher regards Mike G4VQH
Thanks for your feed back! 73
Peter ROCKS... 👍👍👍
Thanks
So those built in self biased transistors are digital switches?
I always wondered about them.
Thanks for the Saturday repair download Peter. Have a great weekend.
Digital Transistors are mainly for switching..Thanks for watching
another great video from the master!!
Thanks
Good luck on repairing the yaesu 1000
Radio from paul chapman
Great Video - sehr informativ!
Danke Peter!
Thank you
Peter all your videos are great. The earlier ones on Baluns in (4 parts a few years back) were extremely good and fundemental. You did one 6 months ago on replacing the Icom7300 final mosfets. I just wondered where you got those from? I only ask because other than eBay (hmm) I am struggling to find them. David
good job as always ... 73s de DL6RDE / AA1KD, Charlie
Had me a Yaesu 757gxII had receive issues and such. Was leaky diodes. Put me in some 1N4148 and fix it good. Did you use Genuine replacements or did you use some equivalent for the diode? Good video.
Thank you for feed back
Hi Peter. Have been following your videos for sometime. I plan on getting into the radio restoration and repair aspect. Could you please post more videos on what type of test equipment you would need to repair and restore both tube and S/S radios, and how they interact with each other. Thanks Hart va3kis.
Where did you buy the alligator probe clip at 16:12?
www.sks-kontakt.de/en/test-measurement/products/product?nr=9324351
@@TRXLab Awesome. Thank you! You're the best!
Where could I find the test leads/probes you used Peter?
www.sks-kontakt.de/en/test-measurement/products/product?nr=9723181
Another great video. There's no way I could have fixed this :(
Hi can I ask why the red TX led is staying lit when the radio goes back in to receive. Many thanks 👍
Your troubleshooting skills and explanations are outstanding. Well done video! Thanks Peter 73 Kb7ici
Thank you
Excellent work Peter :-))
Why is the TX LED on in RX mode?
It's due to the fault he just explained.
My FT1000MP MK5 frequency display is sometimes slow to appear when first powered on, any ideas Peter ?
Look for bad electrolytic capacitors on the display board.
The backlight circuit is ageing if you are lucky only caps are involved....
@@TRXLab thank you Peter, I have been told that it sometimes helps by reducing the length of the cables from the driver board to the display.
Hi Peter great video as always
I have a radio I would like to have repaired can you advise on how to get in touch please I am based in the UK and would like to ship to you
Kind regards
Craig
put an MI301 PIN diode instead of the original diode. yes it's a bit more expensive but you'll never have problem with that circuit again.
39.9 of Celsius is really high fever... please help me dr Peter ;)
LOL yeah high fever
Love to send you my MK2G. Works for 10 min. Then we only have 160. Probably relaying. I Can't see that well or I'd go for it. Be nice to be able to get a New relay board but I'm sure know one makes them.
yeah hard to say...
@@TRXLab If you ever get space an you want to repair my mk2g. I've got the cash. You really do awesome work!!!
hi I was going through your channel I came cross this video, I have FT-2000 with very odd behavior which I cant describe, how can I share you the video's of my radio behavior? so if you can help me to solve it.
thanks peter great info 73s de mi0??? hi hi
Thank you
Hallo Peter;
Können Sie mir eine Referenz für ein magnetisches Induktionsglaselement geben, um das Element im REED RL6414-Relais zu ersetzen. Ist 10 x 14 mm in Ordnung?
Danke im Voraus 73's
SEB
IS THERE AN ALTERNATIVE TO THE 1N4008 I CANNOT FIND ANY ALT ALL IN THE UK
1N4007/ 4005 any silicon standard diode which will be able to handle some amps
@@TRXLab Thanks for that love your videos by the way excellent channel 🙂
new to your channel and must say the info helps me understand stuff better.
sorry to peter but i am trying to reach out to anybody who can help me i have a old icom ic-726 and the display has gone and was wondering if any one has a old radio about them spares or repair or be able to point me in the right direction to get one. (uk based)
thanks
Have you checked HIFISSB.com for parts?
@@TRXLab yeah checked there not bothered if has to come from another country.
Great informative video as always Nice to see you Peter. Thanks for sharing you knowledge with us 73 de kc9nuw
Thank you
tnx for nice video.
What is your callsing ? De VU2TJF
Make a video about pc RLC meter sound card !!!.
We have lost him again? :(
no worries all is fine..:)
😃👍
ERSTEEEEER
LOL Wunderbar
nice job 73 de dc2fo
Were are u located
Again same diode, referring same behaviouring on other rig, another video