How To Remove & Replace Your 2005-2009 Ford Mustang Radio

Поделиться
HTML-код
  • Опубликовано: 26 авг 2024
  • This video demonstrates how to remove and replace your 2005-2009 Ford Mustang radio. Tools needed are: Philips-head screwdriver, flathead screwdriver and 7mm socket, ratchet & extension.
    If you need pry tools to pop off any part, here is a link to a set of pry tools: amzn.to/3MRxbSE
    If this video helped, be sure to leave a thumbs up and subscribe to our channel for more videos. Thank you!
    Our website: www.martinsuse...
    Facebook: / martinsusedcarsllc
    Twitter: / martinscarsllc
    DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.
    #fordmustang #s197 #radio

Комментарии • 46

  • @stevenmacmillan2493
    @stevenmacmillan2493 Год назад +14

    Very nice video. Informative, and really nice job getting the camera to show exactly what you were working on, especially in those tight spots. Thanks!

  • @jeffcallicott9269
    @jeffcallicott9269 Год назад +4

    This was a fantastic video. It’s easily the best instructions I’ve seen for dealing with the connectors. Thanks for sharing!

  • @josephganzler61
    @josephganzler61 8 месяцев назад +1

    Mucho Many Thanks For This! I tackled this job today; I'm embarrassed to say how many hours it took, LOL. Musta run back into the house 152 times to get through each step - I could NOT have done this job w/o this video! Fan/Heat Control did NOT work initially - I channeled my Dad, my Mom, and my deceased car helper buddy, and Voila! It started working! Hopefully I won't lose the Fan/Heat Controls if I hit a bump...
    Now to bench the old unit and see why it won't eject its CD(s) - Shaker 500 was in-op when I bought the car...

  • @Prothika
    @Prothika 2 месяца назад +1

    Thank you! Made me more confident in working on my own vehicle.

  • @amos6013
    @amos6013 Год назад +1

    Terrific video. Best look at the way to undo the connectors I have seen. That seems to be the biggest problem when attempting to remove the radio. Thanks again for the great video.

  • @bottanoog9545
    @bottanoog9545 21 день назад +1

    FANTASTIC CAMERA WORK...... WOW!!! How do you do it?? Just incredible!! T Y

  • @newfie-dean5803
    @newfie-dean5803 2 года назад +4

    Great video. Some videos tell you to disconnect the negative battery while doing this. I don’t think that’s really necessary and it doesn’t appear that you did that.

  • @bigjoker4u
    @bigjoker4u 2 года назад +3

    finally the perfect how to video thank you

  • @Loveroflife5.0.
    @Loveroflife5.0. Год назад +1

    First 25 seconds of watching and I can tell this is one guy that knows what he’s doing. 😂

  • @krizguti
    @krizguti 9 месяцев назад +1

    Good video..now I know how to remove the stereo 😊

  • @queenoftheworld39
    @queenoftheworld39 2 года назад +3

    This is the best of all the Mustang radio removals I've seen. Thanks so much for posting. I need to pull the unit out in order to just disconnect the CD player from the radio and then put it back in place. Even when the radio is turned off, the CD player is still draining my battery. Can you tell me which connector(s) are only for the CD player?

    • @MartinsUsedCarsCollectiblesLLC
      @MartinsUsedCarsCollectiblesLLC  2 года назад +1

      The big clip on the back of the radio is the power source for radio and CD player. Try plugging in the other two and see if the radio works. But I’m not sure it will power on without the big plug.

    • @someguyyouknwo7351
      @someguyyouknwo7351 2 года назад +2

      I’m having the same issue I removed the shaker and the car doesn’t die at all it runs great. But I tried different plugins and what not and still somehow get the clicking radio thing that drains the battery so I’m guessing we just gottah get another one

    • @kxshio3790
      @kxshio3790 Год назад

      Currently doing that

  • @bennettamplification
    @bennettamplification 11 месяцев назад +1

    Great video! Thank you

  • @mymessenger3152
    @mymessenger3152 Год назад +1

    I have a pioneer switching to a Dynavin radio and do I need to switch it to a flat setting and turn all the bass boosting and all that off before the switch

  • @daleglenrandomadventures2992
    @daleglenrandomadventures2992 Год назад +1

    This vide really help me thank you!!!!!!

  • @edwardzamorski3711
    @edwardzamorski3711 Год назад +1

    Very good video

  • @panasalsa
    @panasalsa 11 месяцев назад +1

    When I removed the radio it was 3 connectors. The wire harness I shop around have two connectors. What is the 3rd connector for?

  • @domigrin4886
    @domigrin4886 10 месяцев назад +1

    Hey, great video.
    Does this Stang has an AUX Input?
    It says „AUX“ on the shaker pannel, but I can‘t find an input.

  • @catsaretasty
    @catsaretasty 2 года назад +2

    If you replace the shaker with another shaker do you have to reprogram anything Or put a code in?

  • @mattsaysitscool1396
    @mattsaysitscool1396 Месяц назад

    I want to swap out my 07 Shaker 500 radio for an OEM Ford navigation/touch screen radio from the same generation (like the Shelby’s have) would I run into any issues, or would it install just as easily?

  • @bgalmjr
    @bgalmjr Год назад

    Great video where did you get the radio

  • @davidhernandez8187
    @davidhernandez8187 2 года назад +1

    My radio gets the same signal for every station and then the signal distorts, I thought It was the antenna but it’s not, does it mean it’s the radio and I need a new one?

  • @tylergarten4668
    @tylergarten4668 Год назад

    While unplugging the bottom plugs of the climate control module, (the radio cover) I broke the grey lock on the electrical wire connection on the passenger side. I managed to plug it back in without the lock present, and it seemed to go all the way in and click, but now I have no A/C-As in, absolutely nothing happens on ANY of the settings. Could breaking the lock of the aforementioned wiring connector have caused the wires to not properly connect, thus causing my problem? Or is it likely something else?
    By the way, I changed my blend air door actuators (the two I replaced are both mechanically and electrically connected) while taking my radio in and out, so I don't think that's the issue, but just so you know

    • @MartinsUsedCarsCollectiblesLLC
      @MartinsUsedCarsCollectiblesLLC  Год назад

      Check both connectors to make sure they are in correctly. Passenger side the clip is at the top. Driver side the black clip is on the bottom. Good luck.

  • @mikekellum6238
    @mikekellum6238 Год назад

    Question. I have a 2006 Mustang GT with the Shaker 500. The FM band has ceased to work. Popped out the head unit and began looking for an ORM replacement. The model number on my unit ends with “ HE”. Most of the head units I have found end in “ GE”. Some have stated the antenna connection isn’t the same between these two head units. Both have identical 06 model numbers except for the last two. Letters. Any thoughts concerning if what I have been told is true? Find it hard to believe Ford would change the head unit antenna connection mid year, but stranger things have happened. Thanks

    • @MartinsUsedCarsCollectiblesLLC
      @MartinsUsedCarsCollectiblesLLC  Год назад +1

      The are correct. The 2005 & 2006 Shaker radio has a different antenna connection than the 2007-2009. If you can match the “HE” to a replacement than you are good. Best case, you look at the antenna connection on your unit and the one you are looking to buy. Make sure they are the same before you buy.

    • @mikekellum6238
      @mikekellum6238 Год назад

      Thank you for the verification and timely response. I used your video to remove my head unit. Videos like yours makes life easy. Unfortunately when Ford decides to change head 7nits during a model year, it makes life difficult. Loads of units ending in GE, but practically none ending in my HE. Figures lol.

    • @MartinsUsedCarsCollectiblesLLC
      @MartinsUsedCarsCollectiblesLLC  Год назад

      @@mikekellum6238 Try to find one that has the same antenna port as your current unit. The Shakers have three ports for connections and the antenna port. 2005 & 2006 do not have a white spindle in the middle of the antenna port.

    • @mikekellum6238
      @mikekellum6238 Год назад

      Unfortunately all the units I find are on line and I can only go by the photos of the back of the unit. Some antenna openings appear to be the same but not seeing them in person gives me cause for concern, Don’t want to buy a unit that won’t work. If I could validate a GE version works with the HE version I would be set. Thanks again.@@MartinsUsedCarsCollectiblesLLC

  • @corywalker4078
    @corywalker4078 8 месяцев назад

    So...do you still have that Shaker 500 radio? I am doing a restore and need one.

  • @Mejia.Gideon
    @Mejia.Gideon Год назад

    If i add a factory navigation touchscreen radio to a 2005 - 2009 mustang will i have Bluetooth

  • @xxaviierr._
    @xxaviierr._ 2 года назад +1

    i put a shaker 500 in my base 07 v6. nothing. everything’s connected but it’s not working.

    • @MartinsUsedCarsCollectiblesLLC
      @MartinsUsedCarsCollectiblesLLC  2 года назад

      There are several fuses that relate to the radio. Check all of the fuses to the radio. Also, it could be the replacement unit isn’t working properly. Try putting your old radio back in to see if there is power to the radio.