Homemade A Cargo Bike Using Cable Driving System From Damaged Bike Parts
HTML-код
- Опубликовано: 1 дек 2022
- Dear Everybody,
Today I would like to introduce How to Build An Electric Cargo Bike Using Cable Driving System From Damaged Bike Parts.
About my welder, you can refer this one: bit.ly/3zRuNUY
I hope you feel interested in my video.
Please like, share and subscribe my channel to see more videos.
Thank you so much!
Fawa Bros.
#fawabros #cargobike
Cool build but I would have put some caster into the front forks to make it less twitchy and handle better.
Cheers
Terry
EXACTLY !! as soon as he held the front-end up, ready to weld, you could see it was wrong. when was the last time you saw a front fork with a vertical stem ??
Just curious why you didn't put any caster in the front wheel. Seems like that would have made it a little more stable. Otherwise, it's a great job.
lol, if you crossed the cables before they enter the long tubes it would steer the right direction
That's what I was trying to point out to him but he insists that I am wrong. LOL
ShepherdChapel YT explains the whole Bible.God bless.
Nice steering! Turn the handlebar to the left and the bike goes right. Turn the handlebar to the right and the bike goes left. Genious!
This case, you’re not correct. You should watch again. Thanks!
@@fawabros Watch your vide from 6:44 and come back to me to admit you're wrong.
@@plain_and_simple i looked several times: i can't see what you're on about m8
This whole video is a disaster. TIG welding magically fills gaps without filler rod. No chain tension mechanism. No wire nuts or solder. There is camera trickery throughout.
@@raymondo162 At 6:44 Notice that the front wheel turns right when the handlebar is turned to the left and vice versa. Play the video at 0.25 normal speed and you can''t miss it.
Người việt giỏi quá
Excelente trabajo, creo que debiste darle una pequeña inclinación a la horquilla, para tener mayor estabilidad. Por leyes de la física, al tener la horquilla un ángulo hacia adelante o atrás, permite que la rueda delantera este siempre derecha así tengas el volante sin control. Por otro lado, debiste unir el volante con el travesaño de abajo, y así ganar más rigidez para la bici ...
yo opino que en lugar de la patita lateral de una bicicleta normal era mejor algo que sea mas reforzado y funcione para ambos lados, para cuando se deje la bicicleta sola y/o con carga, también por seguridad al momento de cargar :v
Have you checked how hot the controller gets? Probably not the best idea to have it on top of the batteries.
Schön gemacht . aber du hättest der Vorderradgabel mehr Neigung nach vorne geben sollen das würde besser laufen und lenken
... молодец парень, отличная получилась работа, красивый и необычный дизайн, вот только грузовую корзину можно было сделать вдоль рамы велосипеда 📦🚲🚲🚲🛠️⚙️🔗🔩📏🗜️🧰!!!
Hola soy nuevo en su canal. Saludos desde Texas USA.
Thank you!
Привет из России! Тобольск.
Gostei boa idéia 👍
Thank you!
Very interesting build. But seriously, you cant just twist and tape the electrical wiring to lithium batteries, you have to solder them together! After just a few miles with wear and tear you gonna have a short circuit and even possible a smaller explosion. Do over, and do it right!
Thanks for your advise!
@@fawabros DO WHAT HE TELLS YOU!!!!
Ýýyýýýýýýýýýýýýýýýýýý⁸7òòýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýýyýýýýýýýýý
This way its not even a ebike but a electric scooter sadly shouldnt have to be either
did you see the electric bus go up in flames in paris a while back ?? F in Ferocious !! scary bad
When I did a tour to Budapest, Hungary, I noticed there were many cargo bikes with this configuration. They are not so common elsewhere I visited. Because the cargo basket is rather large, I would use a three-wheeler with two front wheels to stabilize the bike when it is parked.
مرخبا مخترع ممتاز الجميل الاختراع رائع مذهل ممتازجداجدا😙😚
Many thanks for your compliments!
Не изобретение, если что, лишь повторение. Изменён лишь привод.
Tantos caras que tem tanta ferramenta e não inventa nada ,uma dessa serial bom pra eu ir no mercado
Yes, thanks.
DESDE LA REPUBLICA ARGENTINA SUPER FELICITACIONES SEGUI ASI INFINITAS BENDICIONES SALUDOS
Thank you so much!
Theseasonorg explains whole Bible God bless
Buenos.dias.amigo.de.aqui.vzla.........favor.informe.cuanto.costo.todo.lo...que.utilispara.hacer.esa.bellesa.lo....felicito.es.un.buen.proyecto
Thank you so much!
hello timor leste great idea brother
Thank you & welcome!
Good 👍
Thanks!
Muito sucesso pra vcs da equipe
Thanks!
Eficiente e de quebra muito linda!
Thank you!
I understand it's just a show, but 90 degree head tube angle?🙃
As soon as he held the front-end up, ready to weld, you could see it was wrong. vertical stem?? No way!! this was borne out by the riding shots - twitch city !! i'd be surprised if he went any distance without falling off........ it's unfortunate, but this is ''re-inventing the wheel'' and making a bad job of it. i ask: when was the last time you saw a front fork with a vertical stem ??
essa ideia é de genio parabéns
Thank you!
4 мешка цемента увезёт это чудо?
Basket isn’t enough strong.
good
Thanks!
That would be fun to ride to go and get groceries at Walmart. 🤗
Wise guy!!
Thanks!
Ideia top👏🏻👏🏻👏🏻
Thanks!
echt
คุณเก่งมากสวย
Thank you!
Que buenos trabajos, excelente 👍😃
Thank you so much!
hello. great job, good luck
Thanks!
Шикарные поделки.Чистота как в больнице.Давно подписан.Супер!!!!
Thank you so much!
Amazing video I love 💕 this
Thanks!
Great idea on the cable steering design. Thinking of building a trike with rear wheel steering and this should work great.
Gostei do projeto e não sei como fica a estabilidade, poderia ser com duas rodas na frente...
1 front wheel is enough.
Ficaria, bem mais segura!...
Корзина удалась! Но с такими люфтами в рулевом далеко не уедешь.
Особенно удалось, если придётся грузить только на одну половину. ☝️
У нашего кулибина сделано лучше.
@@user-gw1op5km3h как узнать русского в каментах? Он будет всех обсирать.
@@JohnDir-xw3hf лицемерная лож. Просто у россиян принято прямо правду говорить, а не лицемерно лебезить.
Пс, если чисто хейчу, то слабо опровергнуть сказанное мною?
This bike is totally suitable for shippers in Vietnam, nice idea and great work!
May be.
I'm thinking no caster and slop in your steering linkage would make this thing scary to ride
Good ii boss 💪💪👍👍😊😍
Thank bro!
good idea
Thanks!
Parabéns, manda essa pra mim.
Haha, thanks!
Bonito trabajo
Thanks!
Como posso adquirir uma desa pra mim? Estou interessado!
Whithout pedals, in Italy it's a motor bike so, it need plaque, insurance, taxe and casque
👏👏👏👏👏👏👏👏👏👏👏👏👏👍🎇 DOVREBBE ESSERE IN PRODUZIONE IN SERIE NE VENDERESTI ....
Хм, а автор то смотрит российских блогеров самодельщиков, есть у одного подобный грузовой велик, правда с педальным приводом, но в остальном конструкция лучше этой, особенно по части грузовой части.
Ты не заметил, что автор канала имитирует сварку на камеру, нет искр, швы не красные, сразу меняется ракурс камеры. Единственное объяснение это то, что он бережет матрицу камеры от выгорания. Держак это обычный яркий светодиод.
strange and unique bicycle construction. suitable for rent for walks in the park
Thanks for your suggestion!
Oke friend
Нет, не уникальная. ☝️
Top!! Mas o que faz se o cabo quebrar bem na hora de fazer um desvio?
Legal né eu só não andaraí, nem me pagando imagina numa curva a vibração,
Eu trocaria os cabos por hastes...essa folga tá tirando a estabilidade.
Eres muy inteligente
Te felicito
Thank you so much!
😁😁😁😁😁😁👍👍👍👍👍👍👍
تسلم تسلم
Thanks!
pero si se ve en el video que el artefacto este es mas inestable que la ostia. dios mío cuando vi la horquilla con ese ángulo de ataque es para darte con una tubería hasta que tuvieras una buena idea. dios mío. cuanto hay una zona de equilibrio en ángulos de ataque de motos y bicis que es la comodidad a alta velocidad o manejo a baja. LOS ANGULOS NORMALES SON DE 22 A 35º . así lo unico que has hecho es una bici inestable y propensa al desequilibrio. encima eléctrica y el peso del motor desplazado del eje central. procura no matarte por donde vayas. CORRIGE TIO
Que máquina de solda é essa??
where do you get a self-feeding tig torch?
3:47 you can see the pipe piece move after he "welds" it lol
not tig??
@@raymondo162 what type of torch is it? It looks just like a tig torch.
Lanjut,kan Brow
Thank you so much!
faz um mini trator cortador de grama pleas!
Большой люфт руля,плохо скажется в управлении.
No, it’s very good.
your front steering geometry looks all wrong, trail is very negative it looks unstable and wandering all over the road. Cool idea though
Hello Fawa Bros good job well done
Thanks!
Parai es un exselente trabajo invlucibe yo estoy siendo una pero a mi manera por qué siempre tiene que criticar esto no está bien que mejor lo ubiera echo así nunca estA la jente conforme
The centre bar reduces the size of box to be carried, could you have routed longer steering cables under the cargo area. As mentioned, a front wheel needs rake.
buena idea pero es un poco inestable se nota mucho al doblar
Cómo gira ?, tiene que ir la carga equilibrada necesariamente?, dobla por el peso de la persona cargándose solo a los lados?
só está errado a posição da caixa de direção, tem que mudar o ângulo de 90 para 110 graus, fica muito perigoso como está.
ខ្មែរជាអ្នកធ្វើឬយកវីឌីអូគេមកផុស
Awesome job dude.
Thank you!
Super criativo parabéns 👏👏
Great job
Thank you!
Veo que en muchos videos barrenan de esta forma, la verdad lo veo peligroso pues si la broca se amarra ara que la espiga gire o te la aviente causándole lesiones al que este presente, lo ideal es sujetar la pieza a barrenar en una prensa y luego hacer los barrenos.
Why aren't you using welding rods, these weld joint are not strong, the welds will crack!!!
I hide almost welding process.
Клёво,но только на дорогу нельзя на самоделке.
Why not?
@@fawabros закон тайга,а вообще,даже велоприцепы самопальные нельзя таскать по дорогам .У меня раз пробиали по интернету магазин где купил велоприцеп.
La canastilla la hubieses puesto mejor arriba ya que es espacio desperdiciado, donde esta, una más pequeña. Calif. 8.5 Vas mejorando.
👍👏👏 exelente trabajo....
Thank bro!
How much steering slack you have? I built such bike with linkage arm, it's more heavy but seems to have less slack. It also seems indeed that the steering is crossed. How much is does it weight total?
Hi Bro
Good Work Amazing 😀😀😀
Thanks!
No mientan mas quien tiene en la casa todas esas ruedas nuevas ?
Top
Thanks!
👍👍👍👏👏
Забавная поделка, но фигня в целом. Тот факт что могу и делаю, не значит что это годно. Please translate into Russian
Why not in general?
quero ver mais
you should mass produce this
Ещё бы чугунную батарею приварил бы.
Pretty rough, I wouldn't be loading her up too much. Very entertaining though.
Está louco q eu desceria uma ladeira nesse treco aí com direção por cabos.😥😓😐🤭
🥰🥰🥰🥰
Ok vin chao moi nguoi
Hi
you should improve this with little changes:
-make the cargo bay bigger
-front brakes
-front fork need some angle
-drivetrain so you can pedal if battery is over
-kickstand need to be stronger
Để đồ không căn bănh té rồi sao
Lucu
Thanks!
how wonderful it turned out
Great concept! But does the lenght affect it's ability to turn securely without a severe drop in speed or stability?
get ovr the technical junk, try it and improve onit>
Что насчëт устойчивости с такой "гениальной", прямо перпендикулярной земле вилкой?
We can not build selfgoing bikes in Sweden...you can only have the motor to help you trample....this is classified as a moped and goes not to registrer.
You can drive it on local road.
You can build it. You are just not allowed to ride it in public.
Du coup ce n'est plus du tout un vélo ^^
빨리 신안등록
Thank you!
Все заметили? Присутствует огромный, опасный минус в конструкции. Да, верно, это тросики управления, их люфт, на покатушке, видно, что пилот борется с расколбасом, дёргая руль, как на жиге, с ушатанным редуктором. Исправить это возможно, но они делают поворот, да ещё и под острым углом, отчего, при натяжке в струну, на этом повороте, они заклинят. Как вариант, можно ввести в конструкцию, эдакую качель, на этом участке, чтобы из двух тросиков сделать четыре, и тогда, уже, появится возможность натянуть их все, как полагается.
P.S. Развесовка багажника, тоже вызывает вопросы, ибо перевес, в реальных условиях, будет иметь большее, нежели у заводских вариантов, плечо приложения. Лично я, в данной конфигурации рамы, разместил бы длинный, но узкий, багажник сверху, на верхней трубе. Сейчас же, только возить несколько кирпичей, с собой, на случай, если нужно будет везти, что-то кроме одинаковых коробок.
Там тяги на руль нужны,а не тросы,и вилку сделать под углом.
@@D_Viktorivich Да, это в идеале. Я же, привëл пример, что можно сделать, прямо сейчас, чтобы уменьшить негативный эффект.
а что мешало сидеть спереди а груз сзади
Which country you from pls??