Not here to rag on anyone, just some points to make I like the idea But Lockwashers would save you on bolt length and extra nuts Nylon nuts also would come in handy Keyways on the shafts And building a frame to accommodate the wiring Keep on building Bros
Hebat mantap teruskan menciptakan yang sangat di butuhkan orang lain yang menurutnya sulit menjadi mudah semoga sukses dan ciptaannya bermanfaat bagi semua orang
Не хватает жестокости скручивания вдоль оси трицикла для задних маятников: колесо стоит далеко по ширине от шарнира маятника. А также не была бы лишней корзина под сиденьем 😉👍🏻
Congratulations on your talent, you have a very powerful and beautiful 3-wheeled vehicle. Great effort. Proving that anyone can dare to think and do anything. Is this car difficult to drive on curves?
Other than doing so many things utterly wrong is kind of cute. The angle of the front forks is wrong, not a lock washer was used anywhere on this bike. The brakes were put together improperly the welds were not robust enough. When he test drove it the axles on both sides as well as the tires wobbled and the gears also wobbled. The list goes on andon. It is a nice idea and with somebody that was more technically capable it would have been a wonderful idea. In addition there are no Transmissions, just a clutch. The chain goes from the engine to a jackshaft then to the rear wheels no transmission involved. Oh yeah where is the battery? Thank you have a nice day. Bob from Virginia USA
Öncelikle selamlar saygılar sunarım değerli insan. Çok güzel muhteşem, çalışmalar sergiliyorsunuz. Zevkle takip etmeye çalışıyorum. Eline, emeğine sağlık.🇹🇷👏
12:39 размеры и прочность задних рычагов просто поражают; звёздачки так и вовсе кричат в экстазе от предстоящих нагрузок! Блин, думах хоть сегодня не будет подобного треша, но автор упорно всё делает сам, не желает позвать человека, который хоть немного понимает в конструировании.
you need a solid rear axle, too many reasons to explain why, you will find out as you use it, but trust me you will fit an axle from wheel to wheel soon,
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
I have no idea, I'm just a spectator and a craftsman. Maybe I've overlooked something, but I think it's just a single nut that holds the rear wheels in position
El proyecto es muy bueno, pero falta precision que se obtiene con maquinaria para centrar los ejes y deberias intentar colocar del embrague al eje principal una correa dentada de distribucion, ejemplo peugueot o Nissan... con la de 83 dientes basta.... para asi eliminar el molesto ruido de la cadena principal. Me gustaria verlo modificado asi, solo dejando las cadenas para la traccion de los neumaticos. Ademas que sin diferencial es dificil doblar.... pero como dije muy buen proyecto
hola saludos desde Venezuela felicidades por tu proyecto, me gustaría fabricar un parecido pero con un cajón encima para carga, me podría alguien guiar en las medidas
The first Harley Davidson production motorcycles had a single cylinder soup can (tin) cylinder liner and only produced 4 HP at maximum. This 200cc motor could produce 20 HP or more, depending on carbonation, etc. 14HP or more is generally enough to drive a small motorcycle to 55 MPH.
Dunque: A) non c'e un differenziale,un giorno scoprirai a cosa serve... B) un prototipo simile lo abbiamo costruito nel 1997 (con differenziale) e mandato in BMW e Piaggio,nessuno sembrava interessato,stranamente nel 2006 Piaggio mise in vendita l'MP3,che era molto diverso,ma aveva adottato parecchie delle innovazioni del nostro prototipo...
Not here to rag on anyone, just some points to make
I like the idea
But Lockwashers would save you on bolt length and extra nuts
Nylon nuts also would come in handy
Keyways on the shafts
And building a frame to accommodate the wiring
Keep on building Bros
Keren banget sukses bosku lanjutkan dengan cepat bikinnya sediri mantap 👍🙏👎
Thank you!
Parabéns pelo projeto do triciclo motorizado ficou top meu amigo ...
Agora a diversão vai ser só alegria...
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪
❤❤❤❤❤❤❤❤
good
Thanks!
wow nice video 👌👌👌👌👌👌🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩 Bangladesh
❤❤❤
Very good 👍👍👍 bhai ji
Hebat mantap teruskan menciptakan yang sangat di butuhkan orang lain yang menurutnya sulit menjadi mudah semoga sukses dan ciptaannya bermanfaat bagi semua orang
Не хватает жестокости скручивания вдоль оси трицикла для задних маятников: колесо стоит далеко по ширине от шарнира маятника. А также не была бы лишней корзина под сиденьем 😉👍🏻
Love from India ❤
Thanks!
Now that's what I call a beautiful video.................... congratulations.
Congratulations on your talent, you have a very powerful and beautiful 3-wheeled vehicle. Great effort. Proving that anyone can dare to think and do anything. Is this car difficult to drive on curves?
I like his videos because I'm looking forward to find some minor or major mistakes in his creations.
Was not disapointed ... ;-)
جميل جدا رائع جدا عبغري😉😆💪👍👏👏👏👏👏من اين انت انت مخترع بارع جدا
Thank you so much! I come from Timor Leste.
Excelente trabajo.. felicitaciones desde Argentina..
Thank you!
Amazing brother powerful video good job
Thank bro!
Other than doing so many things utterly wrong is kind of cute. The angle of the front forks is wrong, not a lock washer was used anywhere on this bike. The brakes were put together improperly the welds were not robust enough. When he test drove it the axles on both sides as well as the tires wobbled and the gears also wobbled. The list goes on andon.
It is a nice idea and with somebody that was more technically capable it would have been a wonderful idea.
In addition there are no Transmissions, just a clutch. The chain goes from the engine to a jackshaft then to the rear wheels no transmission involved. Oh yeah where is the battery? Thank you have a nice day. Bob from Virginia USA
Hello Fawa Bros beautifully made excellent work good job well done
Thank you!
Öncelikle selamlar saygılar sunarım değerli insan. Çok güzel muhteşem, çalışmalar sergiliyorsunuz. Zevkle takip etmeye çalışıyorum. Eline, emeğine sağlık.🇹🇷👏
Thank you so much!
👍🙏
Mantap bang seht selalu ❤❤
Thanks!
Mantap, 👍 exsellent
Thanks!
12:39 размеры и прочность задних рычагов просто поражают; звёздачки так и вовсе кричат в экстазе от предстоящих нагрузок!
Блин, думах хоть сегодня не будет подобного треша, но автор упорно всё делает сам, не желает позвать человека, который хоть немного понимает в конструировании.
Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
Canada 👎
VERY GOOD 👍👍 THANKS FOR KNOWLEDGE SIR YOU ARE REALLY GREAT THANKS AGAN HERE KRISHNA HARI BOL
you need a solid rear axle, too many reasons to explain why, you will find out as you use it, but trust me you will fit an axle from wheel to wheel soon,
Test superbe😁😀👍
Thank you!
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Keren 👍
Thanks!
Semangat slm sehat bosku🙏👍👍👍👎
Thanks!
That looks wow fun. I'd love something like that. Great video
Thanks!
Craftsman I like your videos all the time do more by helping the world
Hello ikut belajar cara buatnya 👍🇲🇾
А ни кого не смутило, что выхлоп, держится только на 2 болтах, которые на движке? Не хватает точки опоры. А так идея отличная!
Если б только это ...
new subscriber...
Thanks!
You're a genius.
So good 😮😮❤
Inovasi nya sangat bagus tapi 👍👍👍
Isso é só pra quem sabe e entende, muita precisão e seguro no que está fazendo 👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏😘 br.
Thanks!
😅😅
I am purchase this bike please 🙏 reply
I have no idea, I'm just a spectator and a craftsman. Maybe I've overlooked something, but I think it's just a single nut that holds the rear wheels in position
Good stuff
عمل متقن جميل جدّا صديق
Thank you so much!
Good
El proyecto es muy bueno, pero falta precision que se obtiene con maquinaria para centrar los ejes y deberias intentar colocar del embrague al eje principal una correa dentada de distribucion, ejemplo peugueot o Nissan... con la de 83 dientes basta.... para asi eliminar el molesto ruido de la cadena principal. Me gustaria verlo modificado asi, solo dejando las cadenas para la traccion de los neumaticos. Ademas que sin diferencial es dificil doblar.... pero como dije muy buen proyecto
Гарна робота❤
Parabéns 🎉pelo trabalho ❤
Legal com sempre parabéns
Thanks!
Clip đã đầu tư đến như thế, thì gắn thêm bộ vi sai ngay giữa 2 gối đỡ vòng bi là ok ngon luôn 🙄, hơi tiếc nhỉ 🤔
а как "это" поворачивает? ведь межосевого дифференциала нет. и привод жестко на оба задние колеса.
И конструкция подвески неправильная. От количества косяков аж хреново стало
The brake banjo bolts should have a washer on each side. In video they were both stacked up on only one side of banjo bolt. Very cool trike!
You got those directional chris crossed.
hola saludos desde Venezuela felicidades por tu proyecto, me gustaría fabricar un parecido pero con un cajón encima para carga, me podría alguien guiar en las medidas
Most impressed with the engine that runs on 7UP !
Amazing video
👍🤝Друг мне кажется слабенькая подвеска☝️🤔🤨😳
Very, good, guru
Just amazing
Thank you!
waygel na waygel uh.
Felicidades por todos lsus proyectos, donde puedo conseguir los planos de algunos proyectos que me gustaron?, espero de su respuesta, gracias
5:00 замок на цепь установлен неправильно, не той стороной. До этого ещё мотор был прикручен без шайб.
Т.е конструкция подвески тебя вообще не смутила?😂
@@X_Killer. 12:39. Был у меня коммент и про это.
Кстати, а вас там размер приводных звёздочек не смутил? 😊
@@ИгорьЛисица-в1ъ самое маленькое зло🙂
Where do you buy the tubes for the bearings ?
❤ good man
Whit wht bulding cartogena or oxinitroso? Ir butano?
عمل جميل ومتقن
Thank you!
Helo my name os Jesse, I'm com Brasil. You can make one little car with the same motor for 2 people?
Thank from Brasil 🙏🙏🙏
Jngn bilang luar biasa sebelum mampu ciptakan sendiri bom nuklir jelajah antar benua di negrii sndiri,citptaan sndiri !!
Ottimo lavoro ma manca il differenziale, prova a fare una curva stretta!
Great job but the differential is missing, try to make a sharp turn!
The first Harley Davidson production motorcycles had a single cylinder soup can (tin) cylinder liner and only produced 4 HP at maximum. This 200cc motor could produce 20 HP or more, depending on carbonation, etc. 14HP or more is generally enough to drive a small motorcycle to 55 MPH.
Klo di indo ada tk samperin bos ,,❤❤❤❤
Woow!!!!!
😎👍👏👏👏
Смотрю уже давно супер а можноли реобрести эти самоделки.
1:35 WHAT IS THIS?
Deberías de ponerle placas de quita y pon para tapar el motor y protegerlo de la lluvia.
Dont care what anyone elsa has to say I want one😂
Lol the hand grips on the pegs, if it works it works I guess.
author, this is a great job. please tell me, what is the cruising speed of this instance? Like definitely. thanks for the reply.
What is the name of the clutch drum you put on an engine's axle?
Parabéns pela engenharia. O que você faz com esses veículos, depois de fabricados?
Esse inventor ê um gênio pRabens
Ficou show muito bom só que ele poderia ter colocado motor com partida elétrica
اللهم صل على محمد وال محمد
عيد مبارك سعيد وكل عام وانتم بخير
When you will make someting real powerfull? 😁 you can do it. 💪🏻😎🙏🏻👍
Hi ! could you please let me know the solder equipment you use for the project. Thanks
Muito bom.
Thanks!
What model your welder Sir?
13:05 и снова замки установлены неправильно!
Try to make your own engine...next level creation
Thanks for your suggestion!
Super schöner Bau . Ob man(n) den motor startprobleme bereiten kann wenn der choke zulange an ist?
😮😮😮😮😮😮 by @@fawabros
@@TAKNT. N. Nnn. N. .nbbbbv l,😮❤
Ficou top muito bom
Dunque:
A) non c'e un differenziale,un giorno scoprirai a cosa serve...
B) un prototipo simile lo abbiamo costruito nel 1997 (con differenziale) e mandato in BMW e Piaggio,nessuno sembrava interessato,stranamente nel 2006 Piaggio mise in vendita l'MP3,che era molto diverso,ma aveva adottato parecchie delle innovazioni del nostro prototipo...
Fantadtico
👍
Price kitna hai sir kharidna
I don’t sell. Sorry!
👌
Велосипед это-транспортное средство приводимое в движение при помощи мускул ной силы. А это мопед на трех колесах
Rear left brake disc has a right wobble 😂
You should attempt to make an amphibious vehicle for both land and water with 4 or 6 wheels and floats.
I think that frame won't last long through vibration
Gear pada mesin deasel pakai gear apa?
Очень. Клёва