How to set up a 10,000 PSI Air Over Hydraulic Pump Hose and Couplers.
HTML-код
- Опубликовано: 27 авг 2024
- #10000 psi pump for hydraulic press #hose for hydraulic press
Setting up the EngMatTec Compressed air Operated, 10,000 PSI High-Pressure Hydraulic Pump, with 6-foot long 20,000 PSI super tough hose and quick connect screw together couplers.
10,000 psi Hydraulic Pump with 20,000 psi Jacking Hose & Couplers In the United States, delivered to your door:
6-foot long 20,000 psi Jacking Hose & Couplers
In the United States, delivered to your door:
- Valvehalla's website: bit.ly/3nmIJSp
10,000 psi Air over Hydraulic Pump
* In the United States, delivered to your door:
- Valvehalla's website: bit.ly/3l0f7Jn
United States
- Valvehalla's website: bit.ly/3tuMQOT
AUSTRALIA ? copy and click the links below for products seen in this video and have it posted to your door
www.hydraulic....
Once correctly assembled, filled with suitable light oil, and connected to a 120 psi dry compressed air source, a reliable, durable, and powerful portable high-pressure power unit is created.
With 100 PSI of compressed air, this EngMatTec's pump will generate up to 10,000 PSI of Hydraulic Oil pressure. This Model is designed for foot or hand control and can be used to actuate or operate any single-acting implement or attachment.
Applications include
Hydraulic Presses 20 to 100 ton
High-pressure supply for scissor lifts for lifting cars and motorcycles.
Supplying cylinder attachments in collision repair shops and Auto body frame pulling machines and racks.
Pipe and tube Benders
Frame straighteners in auto collision centers.
Spreading attachments in mechanical workshops
Axle correction in trucks busses and other transport equipment
Suspension and alignment workshops.
Torque Multipliers in oil, gas, and mining equipment applications.
Bolt tensioners and nut splitters
Cable crimpers and terminations for electrical, marine, fencing, and safety barriers.
Bridge Jacking.
This ENGMATTEC Pump uses the principle of intensification to generate 10,000 PSI of oil pressure with only 120 PSI of Compressed air.
It is a popular upgrade that is commonly used to convert slow manually actuated high-pressure hand pumps that supply various attachments.
These upgrades will free the operator's hands to handle and support parts during the application of a force.
Also used by Auto Repair Body Shops,
Mechanical, Fabrication, and Welding shops
In the field mechanics quickly Press, Pull, and Push parts and bearings together or Apart,
By Boilermakers to Bend, Shear, Cut Punch, or Twist materials using specialist High-Pressure Hydraulic cylinders, rams, and attachments.
Safe for mining environments, and or other situations when electricity and possible sparks are prohibited. - Хобби
Series model?
This is our only model the AOH-3, it has a Polyethylene reservoir (Tank) with 2.3 liter oil capacity, flow is 1000 ml/min per minute at low discharge pressure and 100 ml/min at 700 bar discharge pressure.
@@Hydraulic.Online Price Please?
@@knmohan6998 Available for A$489 with hose and couplers or A$369 for the pump by itself
www.hydraulic.online/10000-psi-air-operated-hydraulic-pump-with-Hose-&-Coupler-p216005161
www.hydraulic.online/Air-Operated-Hydraulic-High-Pressure-Pump-10-000-PSI-p157622001
Awsesome,there would have to be more applications then the press would there not,this would work on diggers.
Hi Wingnut yes you can use this pump anywhere and on any tooling designed for 10,000 psi, provided you have a consistent compressed air supply. If you are using pullers for maintenance on diggers then yes this tool would be very handy.
I have a question, i have a unit similar to this, what would be the most likely problem when you connect the air fitting the pump automatically starts pumping without moving the pedal in either direction?
Sounds like the air inlet valve is broken or is Stuck in the Down position.
Hi just a quick question do you have your air supply going through a pressure regulator and an oil drip lubricator . or is a pressure regulator all that is needed. Thank you
Good Question Mark, it depends on the use, if it is only intermittent use for example a few minutes every couple of hours then a air filter regulator is fine, if there are periods of long continuous use then a drip feed lubricator should definately be used.
Can you recommend a compressor for this unit please?
You will need a 3 cylinder air compressor to continuously run this pump. At least 340 liters liters per minute will be required. Anything smaller will reduce its performance as you will have to wait for air pressure to bild up in the tank before each use.
How do 10k psi cylinder/pumps differ from 3k psi cyls/pumps?
The simple answer is as follows ,
To go from 3,000 psi to 10,000 psi you will need Stonger pumps (generally piston pumps) will generate more pressure that say a gear pump .
By stronger I mean more metal with thicker cross sections and stronger steel alloys with heat treatment and hardening.
The same is true for cylinders, higher pressures mean higher forces, so Stronger Materials are required with thicker walls, and stiffer and more solid rods and higher performance seals.
how much price hydraulic pump
you can get one from this website we ship internationally
www.hydraulic.online/10-000-PSI-Air-Operating-Hydraulic-Pump-2M-Hose-&-Couplers-p378817874