Careful! On the other side, your release turns the other way!! Handle goes from straight toward rear of car, straight down, then continue towards the front of the car. That’s clockwise on right headlamp, but counter-clockwise on left headlamp.
thank you for showing how the Locking Mechanism works with the HeadLamp Assembly Out, Dude. that shows many of us how it works & how it could be bound up after Hitting a Stupid GD Deer
In the manual which I’m looking at right now, it shows to turn the release tool (socket) anti clockwise!!.... which I did on my 911 (997) and ended up rounding the nut....v annoying. So thanks to this and other videos this time I will follow the guys who are demonstrating it correctly, many thanks 👍🏼😉
How to remove the turn signal lens on 2000 boxster. I have some water droppings on the inside of t/s lens. There is no access with headlamp assy on the bench.
There’s a frunk release jumper in the interior fuse box that you can jump with a jumper box which will supply power to the trunk release button and slow you to get In and swap or recharge your battery
Great video. Very helpful, well made, concise, right to point with no extra info. But DAMN that was scary. Hope you didn't scratch. Please be more careful
Very helpful video! Nice job showing exactly how to do this and how the latching mechanism works. I’ll be replacing the lights in my 986 later today.
Careful!
On the other side, your release turns the other way!!
Handle goes from straight toward rear of car, straight down, then continue towards the front of the car.
That’s clockwise on right headlamp, but counter-clockwise on left headlamp.
Thank you
thank you for showing how the Locking Mechanism works with the HeadLamp Assembly Out, Dude.
that shows many of us how it works & how it could be bound up after Hitting a Stupid GD Deer
In the manual which I’m looking at right now, it shows to turn the release tool (socket) anti clockwise!!.... which I did on my 911 (997) and ended up rounding the nut....v annoying.
So thanks to this and other videos this time I will follow the guys who are demonstrating it correctly, many thanks 👍🏼😉
Thanks dude this really helped me 👍👍👍 just swapped mine out for a brand new second hand pair 😅
Very cool. Thank you!
Thanks for the tips, really helpful!
perfect, thanks for the video.
thank you esteban!!!great job......
Helpful video you remove the headlight washers to retro-fit older style orange headlights without that spacer?
Thank you very good
Super instruction!
Very nice video. No bs. Just the facts
TNKS. SIR. AWESOME
can you do a video on UP GRADING the 996 headlights first generation thanks
How to remove the turn signal lens on 2000 boxster. I have some water droppings on the inside of t/s lens. There is no access with headlamp assy on the bench.
Thank you! Great video 🙏
Great DIY video. I wonder if you can buy just the seal or gasket that goes around the assembly?
Cool...thanks!
Thank you!
Thanks for helpful Information
Great video
Just got stuck , you helped perfect
Was just needing the slotting into the bottom guide advice
Instantly got it 🙏🏴
How to remove all the bulbs. Afraid to break the connections
Did you just drop that socket on the paint
how do you go about changing the headlight gasket?
Porsche won’t start any suggestions? All lights come on but it won’t turn over and my obd port isn’t working so I can’t read any codes
check your fuses.
4mm (on my vehicle)to release the latches
Problem is that headlights are not really firm and still slide out a bit after a while
How to get into the funk on a boxster when the battery is dead and frozen
There’s a frunk release jumper in the interior fuse box that you can jump with a jumper box which will supply power to the trunk release button and slow you to get In and swap or recharge your battery
Speeder cable replacement
👀🤯 Dude just put the wrench down on the fender??!!!! WTF
Great video. Very helpful, well made, concise, right to point with no extra info. But DAMN that was scary. Hope you didn't scratch. Please be more careful