Wife just called said the stove is cracked. a new replacement of this model cost over 1000, the part was 240. i have never really done appliance repairs but i am mechanically inclined. I am confident that with the information you have provided in this video i can get this done. Thank you brother for making this.
Well, that was pretty dadgum easy thanks to you guys! As others have said, I’d have never attempted it without the video. No issues, no hassles ... done in under 45 minutes.
Thanks for the video! Local appliance repair wanted $500 to come out and install the same glass top, and I already had the parts at my house! Took just about 45 minutes to do myself, including watching your video :)
I have the identical stove and this video was a God send. A service tech told me it would be with a service fee of $450.00+--.The instructions allowed me to access Infinite Switch. Thank you, you are the MAN.
Thank you for the instructional video! My Dad and I replaced my cracked stove top. Even had an appliance repair guy tell me it’d be “too difficult” to attempt. I’m ecstatic to have four burners back 🙌.
I certainly owe you a beer, if not 2!! Excellent detailed help at every turn of every screw!! Turns out I even had that same Beach towel!! My wife loves me today! Thanks enormously from Long Island, NY!
Thanks a bunch! We had to order a new glass top and today we successfully installed it thanks to your video! Your instructions were dead on. It took me about 90 minutes from beginning to end along with minimal clean up time. Thanks again for helping me save $$ 👍
well I was going to attempt this myself but had surgery in my left hand last week and broke the middle finger last night but hiring the neighbor. :) Thank you Bens Applicance. Darn Le Creuset dutch oven cooking on low stuck and melted to the samsung glass top
Thank you very much. I would not have even attempted this repair if I hadn't found your video. You made it easy, almost fun with your clear and friendly video. Brilliant idea to lay the audio over the video. My wife and I are actually glad our ugly, worn cooktop cracked. The new one makes our range look new...and we didn't have to spend $1500 to achieve that. John, NY
March 18, 2021: THANK YOU!! You saved me a ton of money. I paid $230, shipping included, from Parts Dr and got it within 2 days. It took my wife and I about an hour to swap out the new cook top. Samsung wanted $190 for the same part but the shipping was really expensive. Excellent video.
Awesome! Thanks for doing this one! I was getting ready to go get a new stove and now we are cooking with electric again for a lot less money than a whole new one 👍
I didn't have the exact cooktop, but similar. Watching this video was enough that I was able to tackle a different model with confidence. 45 minutes - 1 hour.
Thanks for this- you saved me a ton of time. 20min job with my wife’s help. Make sure you have a good electric drill w a clutch. Take care with the wiring harnasses on the cooktop, and watch the part of this video that shows the tabs on the underside of the cooktop. Will save you time guaranteed.
Your video was excellent and helped me change out the top fairly quickly. I had an oops, that I think would be worth sharing. When I was disconnecting the big connectors for the control module, all of a sudden the control module dropped. It ripped the 11 pin connector off the board. I was able to repair a couple of traces and resolder the pabs to get it working. A note of caution then to support the control module when disconnecting the connectors. Thanks again for a great instructional video.
Thanks for posting that. I had one that got smashed. Your instructions were great! Took a while to complete, but for the 1st one ever, it was easy! Thanks
Hey great video. Thank you so much. Really well done. I was dreading it but with your great video it made it easy. Saved me some money. Made an old man look like a hero. Wife made me a pound cake. Will be getting lucky later.
Thanks a lot for this video. Gave me the confidence for repairing my Samsung Induction cooktop on my range. Was a little different, less convenient regarding the removal of the top because of some wirings, nevertheless it was similar and easy. Saved myself $300. Anyhow, thanks for your video.
worked for me, exactly as stated. HOWEVER I ran into a pretty big problem. When I opened up the front panel and let the weight of the panel rest on all the wires holding it in place (like he shows around 2:00 minutes) some of the wires pulled out of the plastic connector. In fairness I wasn't being super gentle, but I wasn't being particularly rough either. I'm referring to 5 wires that connect behind the oven controls. All 5 wires came out of the plastic connector that plugs them into the panel. From your video I was able to tell that it's Grey white yellow blue Light blue for the order, and I had to guess on spacing since there's some blank spaces. Fortunately I guess correctly (just spaced the yellow and white evenly in the gap and all the others at the edges. I'm very surprised and pleased that apparently I got it back together properly because it appears to be working.
Thanks Sooooo Much for your Help. Your Video was outstanding. You are an excellent teacher. We got it done with ease and very straightforward due to your excellent instruction. Cant Thank You enough.
Easy up to installing the warning lights. I found removing the plastic terminal block from the skimpy metal tab holder worked better for me, I was able to install the first two tabs into the rim first, then snap the block in from above. Then close the black tabs. Thanks again for this great video.
Good luck and be careful. I have never broke one, while installing but know it’s possible. I have broke an oven door glass though. Don’t tighten screws too tight. Lol
Haha. Thanks but the crack was truly identical... anyway, took about 90 minutes, works perfectly!! Simply took my time and re-set the slide-in height to give another 1/32 clearance, in case.
Hey, thank you for the video! Very helpful! I replaced the glass, but the raised ring on one of the elements had broken off and was cracked at a few spots. My husband just reassemble it on the new glass and we carefully screwed it all back together upside-down to keep it inplace until tightened. Anyway do we need a new element too? Or will it be okay the way it is.
Hi, great video. I have same stove. POS! My left front burner is out. Its a dual burner type. Outer ring will not turn on. I am wondering about replacing the burner assy., or front switch assy. Have you done any repair videos on that topic at all?
Do you have any advice for how to get the leds working on the knobs and also the touch panel isn’t working? Our oven overheated and now we can’t get the panel to come back on.
Good morning this video is very informative but what I’m actually looking for is how to replace the glass in front of the control panel of this particular range. Do you have a video that covers that?
Thanks we have an induction version but there are almost the same. on the induction there are two fans under the top that were tough to disconnect. We kept them connected and were able to change out the glass top anyway. Took about an hour total and was easier than we thought.
@@BeardedApplianceRepair we did not invert it. i used a couple of thin board to keep the base elevated to get to the screws to remove the glass top. the heat indicators were NOT connected to the glass top so it came off sooo easy.
Great video, I did run into a small issue When putting back the control panel on the front, one side has a space between the stove top and the control panel. The other side is tight. Do you have any recommendations?
How did you get the stove to slid out? I have this exact stove and it is stuck in place. I need to pull it out change my cracked top, but it won’t budge at all
Need to replace an infinite switch on this stove model. Is this the way to get to it? By undoing the control board with four screws underneath? Can't find a video .Only those with switch in back. Thanks
What about the rubber seal that goes between the cooktop and the front panel. Did this range not have one? Does the range have a gap between the two? My range shows a gap where the seal should be and I need a new one but there is no part number
This really helped me! Thank you, saved me a bunch. I found that one of the ceramic rings in one of the burners was shattered. Do you happen to know if those can be purchased?
Thanks for letting me know, looks like they are not selling it on amazon right now. I’m sure you have done it but if you haven’t you can just google the part number to find a seller.
Posted 4 years ago and still helped amazingly today! Thank you!
Wife just called said the stove is cracked. a new replacement of this model cost over 1000, the part was 240. i have never really done appliance repairs but i am mechanically inclined. I am confident that with the information you have provided in this video i can get this done. Thank you brother for making this.
Thank you. That was super easy to do . It took me about 20 minutes to do and saved me around $200.
Well, that was pretty dadgum easy thanks to you guys! As others have said, I’d have never attempted it without the video. No issues, no hassles ... done in under 45 minutes.
Thank you for your VERY useful video. Managed to change our cooktop without any trouble by following your video step by step.
Thanks for the video! Local appliance repair wanted $500 to come out and install the same glass top, and I already had the parts at my house! Took just about 45 minutes to do myself, including watching your video :)
I have the identical stove and this video was a God send. A service tech told me it would be with a service fee of $450.00+--.The instructions allowed me to access Infinite Switch. Thank you, you are the MAN.
Thank you for the instructional video! My Dad and I replaced my cracked stove top. Even had an appliance repair guy tell me it’d be “too difficult” to attempt. I’m ecstatic to have four burners back 🙌.
I certainly owe you a beer, if not 2!! Excellent detailed help at every turn of every screw!! Turns out I even had that same Beach towel!! My wife loves me today! Thanks enormously from Long Island, NY!
Thanks a bunch! We had to order a new glass top and today we successfully installed it thanks to your video! Your instructions were dead on. It took me about 90 minutes from beginning to end along with minimal clean up time. Thanks again for helping me save $$ 👍
Just wanted to say "Thanks" - followed your video step by step and was able to change my cooktop.
You saved me at least $250 in labor 😂. Great, easy to follow video.
Extremely helpful! I just finished doing a replacement on my Samsung, and this video made it vastly easier.
Superb video!!! AAA!! My husband was able to replace our stove top because of your video. Directions were clear and concise!!! Thank you.
well I was going to attempt this myself but had surgery in my left hand last week and broke the middle finger last night but hiring the neighbor. :) Thank you Bens Applicance. Darn Le Creuset dutch oven cooking on low stuck and melted to the samsung glass top
Thank you very much. I would not have even attempted this repair if I hadn't found your video. You made it easy, almost fun with your clear and friendly video. Brilliant idea to lay the audio over the video. My wife and I are actually glad our ugly, worn cooktop cracked. The new one makes our range look new...and we didn't have to spend $1500 to achieve that. John, NY
Your welcome! Glad it helped you’ll!
Instructions were spot on perfect...it is definitely a DIY project that will save you hundreds. Thank You very much for this video.
Outstanding DIY repair/replace video!
Great directions. It only took me about an hour. Thank you!
March 18, 2021: THANK YOU!! You saved me a ton of money. I paid $230, shipping included, from Parts Dr and got it within 2 days. It took my wife and I about an hour to swap out the new cook top. Samsung wanted $190 for the same part but the shipping was really expensive. Excellent video.
Our pleasure!
Thank you so much. I successfully installed my cooktop by following your video step by step. Excellent video and explanation. Kudos
Awesome! Thanks for doing this one! I was getting ready to go get a new stove and now we are cooking with electric again for a lot less money than a whole new one 👍
I didn't have the exact cooktop, but similar. Watching this video was enough that I was able to tackle a different model with confidence. 45 minutes - 1 hour.
Thanks for this- you saved me a ton of time. 20min job with my wife’s help. Make sure you have a good electric drill w a clutch. Take care with the wiring harnasses on the cooktop, and watch the part of this video that shows the tabs on the underside of the cooktop. Will save you time guaranteed.
PERFECT. Swap out was a breeze thanks to you!
Great instructional video. Just finished the cooktop replacement. Thanks!!!
Thank you this video made changing my oven top so much easier than it would have been going in blind. Thank you
Great job guys. Saved my marriage. And my new stovetop.
Your video was excellent and helped me change out the top fairly quickly. I had an oops, that I think would be worth sharing. When I was disconnecting the big connectors for the control module, all of a sudden the control module dropped. It ripped the 11 pin connector off the board. I was able to repair a couple of traces and resolder the pabs to get it working. A note of caution then to support the control module when disconnecting the connectors. Thanks again for a great instructional video.
Incredible video! I legit just followed it and replaced my cracked stove stop. A+
Nice work!
Thanks for posting that. I had one that got smashed. Your instructions were great! Took a while to complete, but for the 1st one ever, it was easy! Thanks
Hey dude, thanks for the video! I just finished replacing my cooktop, and your instructions were spot on!
Hey great video. Thank you so much. Really well done. I was dreading it but with your great video it made it easy. Saved me some money.
Made an old man look like a hero. Wife made me a pound cake. Will be getting lucky later.
Thanks a lot for this video. Gave me the confidence for repairing my Samsung Induction cooktop on my range. Was a little different, less convenient regarding the removal of the top because of some wirings, nevertheless it was similar and easy. Saved myself $300.
Anyhow, thanks for your video.
Glad to have helped!
worked for me, exactly as stated. HOWEVER I ran into a pretty big problem.
When I opened up the front panel and let the weight of the panel rest on all the wires holding it in place (like he shows around 2:00 minutes) some of the wires pulled out of the plastic connector.
In fairness I wasn't being super gentle, but I wasn't being particularly rough either.
I'm referring to 5 wires that connect behind the oven controls. All 5 wires came out of the plastic connector that plugs them into the panel. From your video I was able to tell that it's Grey white yellow blue Light blue for the order, and I had to guess on spacing since there's some blank spaces. Fortunately I guess correctly (just spaced the yellow and white evenly in the gap and all the others at the edges. I'm very surprised and pleased that apparently I got it back together properly because it appears to be working.
Thanks Sooooo Much for your Help. Your Video was outstanding. You are an excellent teacher. We got it done with ease and very straightforward due to your excellent instruction. Cant Thank You enough.
I really appreciate it and it was an excellen video. Followed it wvery step of the way and I was able to replace my own. THANK YOU 🇭🇳👍🏽😎👍🏽🇭🇳
Glad it helped
Awesome video. Just reinstalled mine. Part was $200. Time to install about an hour only because I watched this video 10 times. Thanks!
Thanks for the comment. Glad to help!
Where did you find the part?
Ron Milam you can get it on amazon. Link for it is in the description. They have them back in stock.
Easy up to installing the warning lights. I found removing the plastic terminal block from the skimpy metal tab holder worked better for me, I was able to install the first two tabs into the rim first, then snap the block in from above. Then close the black tabs. Thanks again for this great video.
Thanks a lot I replaced my stove thanks to ur help
I followed your video and it went perfectly. thank you so much for these perfect directions.
You're welcome!
I watched the video and installed the top. No problem. Thanks, this would have otherwise been difficult to figure out.
Man yeah! Glad to help!
Great video! Saved me a lot of missteps and got my cooktop replaced in short order.
Just did mine today.. thanks for this video
Thank you just finish replacing mine. Your video help me a lot.
This is a fabulous video. Every detail was covered. Thank you very much.
Thanks for the video. Just replaced mine after the Mrs. dropped a glass bottle and cracked it. This helped me save $$!
Glad it helped
Thanks. I was able to replace my cooktop with no issues
Super video, 123, and we’re back in order. Thanks for the excellent tutorial!
Thank you 👍
You are Awesome , crisp clear instructions what are great teacher. thank you!!
Your welcome! Thanks for the kind words!
Thank god I found this. Today while moving my stove the top shattered. I’ll have to order the new top and put it on. I now see why it’s like $200.
Glad to help!
Thanks a lot, it really helped me. Today we replaced our cooktop
Awesome! Thanks for the comment!
Thank you for the video, you'll save me money. I really, really appreciate it.
Awesome step by step video that was extremely helpful. Thank you!
Thank You so much, I save a lot of money. I done it by myself. Good video, I'll revommand it to my friends
Listen bro.. if you ever in Tampa or Boston... hit me up. Ill gladly show you around lol. Seriously man, thank you!!!
This video was a huge help! Thank you
Thank you for sharing ,I just finished replacing my,you save me time and headache
Glad it helped
Awesome Video! Way easier than expected, would have been lost without this!!
Our top has the EXACT SAME crack in the EXACT SAME PLACE.... Great video and description ! Thanks so much
Good luck and be careful. I have never broke one, while installing but know it’s possible. I have broke an oven door glass though. Don’t tighten screws too tight. Lol
Haha. Thanks but the crack was truly identical... anyway, took about 90 minutes, works perfectly!! Simply took my time and re-set the slide-in height to give another 1/32 clearance, in case.
Wow, great vid!!!!!! Just replaced my top, your help is a lifesaver!!!!
Piece of Cake Thanks Bearded appliance guy!!!
Done in 30 minutes.. Thank you
Awesome tutorial, easy steps to follow, helped us reach success! You save us a lot of headaches and money :)
Great video, really detailed. Nice worklooks great! 😊
Hey, thank you for the video! Very helpful!
I replaced the glass, but the raised ring on one of the elements had broken off and was cracked at a few spots. My husband just reassemble it on the new glass and we carefully screwed it all back together upside-down to keep it inplace until tightened.
Anyway do we need a new element too? Or will it be okay the way it is.
Dear Bearded Dude, you rock! :)
Took me a bit longer than you, but I managed to replace mine, woohoo!
This was such a help. Thank you so much!
That was great and thanks for sharing where you also struggled so I didn't feel like I was the only one!
Yeah I find my self cussing under my breath sometimes haha. You have to be persistent doing this stuff. Glad to help. Thanks for the comment!
Hi, great video. I have same stove. POS! My left front burner is out. Its a dual burner type. Outer ring will not turn on. I am wondering about replacing the burner assy., or front switch assy. Have you done any repair videos on that topic at all?
Great video thanks. I changed mine without any problem.
Thank you! Exactly what I needed.
You're welcome!
thanks! the cooktop of my stove has exactly the same damage, helps a lot
Good to hear!
@@BeardedApplianceRepair what do you use for floor protection when moving that range? Thanks
Do you have any advice for how to get the leds working on the knobs and also the touch panel isn’t working? Our oven overheated and now we can’t get the panel to come back on.
Good morning this video is very informative but what I’m actually looking for is how to replace the glass in front of the control panel of this particular range. Do you have a video that covers that?
Very helpful. Thanks!
Thanks!
Welcome!
Thanks Bearded Appliance Repair, you have officially achieved Hard Rock status-
Thank you so much
Was just what I needed
Great video! Thank you!
Thanks we have an induction version but there are almost the same. on the induction there are two fans under the top that were tough to disconnect. We kept them connected and were able to change out the glass top anyway. Took about an hour total and was easier than we thought.
Man yeah! Good info if I have to do one in the future.
@@BeardedApplianceRepair we did not invert it. i used a couple of thin board to keep the base elevated to get to the screws to remove the glass top. the heat indicators were NOT connected to the glass top so it came off sooo easy.
Thank you very much for posting this!!!
excellent thank you so much. great job great video. 👌👌
Can you use any cooktop replacement for your range or do you have to use a specific cooktop made for your specific range?
Big help! Thank you!! 🙌
Great video, I did run into a small issue When putting back the control panel on the front, one side has a space between the stove top and the control panel. The other side is tight. Do you have any recommendations?
How did you get the stove to slid out? I have this exact stove and it is stuck in place. I need to pull it out change my cracked top, but it won’t budge at all
Need to replace an infinite switch on this stove model. Is this the way to get to it? By undoing the control board with four screws underneath? Can't find a video .Only those with switch in back. Thanks
Thank you for the video. Really easy to do it yourself.
Yep not bad at all. As long as you are careful. Don’t want to break your new $300 cooktop.
What about the rubber seal that goes between the cooktop and the front panel. Did this range not have one? Does the range have a gap between the two? My range shows a gap where the seal should be and I need a new one but there is no part number
Thanks for sharing this!
So easy thank you
Great video! Was able to change mine
Nice job!
Do you know if you can replace the burners with induction burners ?
I have a NE58F9500SS/AC model do you know what the difference is compared to the /AA in the video...thank you
Excellent..
This really helped me! Thank you, saved me a bunch. I found that one of the ceramic rings in one of the burners was shattered. Do you happen to know if those can be purchased?
Is it part of the element? If so that an element change out. Not sure what ceramic ring you’re talking about.
Same here.
Thank you!
I have a Samsung ne58f9500ss and the large burner on the right side...both inner and outer no longer light up/heat. What would I need to fix this?
It looks like ours but I don’t know which size?
How did you order the glass ?
Is your glass 30” ?
The link says CURRENTLY UNAVAILABLE for the glass top replacement...Order one on line...THANK YOU great details
Thanks for letting me know, looks like they are not selling it on amazon right now. I’m sure you have done it but if you haven’t you can just google the part number to find a seller.