Drop your thoughts on this video, it was recorded a little differently compared to my other episodes (due to vacation) Thank you supercdk for sponsoring this video, be sure to check them out ⬇ Supercdk 25% discount code: SPLA Windows 10 Pro($17): www.supercdk.com/sc/spla10 Windows 11 Pro($22): www.supercdk.com/sc/spla11 Windows 10 home($14): www.supercdk.com/sc/splaH Office2016($29): www.supercdk.com/sc/spla16 Office2019($51): www.supercdk.com/sc/spla19
Go to Control Panel then go to Power Options Choose what the power buttons do also Change settings that are currently unavailable and uncheck the box next to Turn on fast startup.
might be the power supply when you turn it off again try to switch the power supply off and see if it like tries to click back to life had this problem with my psu as it caused my system to have constant power going through it
I agree, I bought an older cyberpower prebuilt (had an evga 600W Bronze) to gut for some parts and it had this issue, seller told me he had to shut off the PSU, I swapped the PSU and it worked fine.
I had a Musetex GO7 case I had to put black tape on some wires on the wiring harness because it would short back on barely noticeable right under the power button. Then the Power option could be the culprit too.
14:20 There is a shortage between two pins on the motherboard which is responsible for power on button, maybe pcb is somewhat broken or track is shortened
In bios, enable 'erp' and goto power setting and in control manger and select 'balanced' as the power plan. Either moght work. Iv had this issue before and this has sorted it
A friend of mine had a same problem - it turned out one of the fans which was connected via Moley was forbidding the PSU to shut off. So try unplugging every part - could be SATA RGB Controller, for example.
I had an older power supply that wouldn't let me power off the pc like yours. It sucks but you just gotta replace the PSU. That old antec might be ok if its paired with an older motherboard, sometimes newer power/sleep states trip up PSUs that were made prior to 2014 or so.
I had that exact same issue with one of my pcs. The way I fixed it was I had to completely swap out the GPU. Then it worked just fine. The gpu that I took out also worked fine in another build so everything should work out fine.
I’m going to make a yt short answering this as well for the budget ballers but I would pair that with cards like the 1050ti, rx 570 Or older like the gtx 970 but I wouldn’t go older than what I recommended
@Ekuhags Lab there is a setting in the bios where the PC well turn on, on power loss resert the bios and it should fix it if that is the case. its normally called Restore AC Power Loss it is probably undewr APM config. And if it is not that I would then check the PSU sometimes the PSU forces the computer back on.
abosolutly love you, you inspired me to check market place that one faitfull day and got me to score a fat deal on a 1650 oc for 60$ cad or 43$ usd keep up the amazing videos
I dont know exactly what it is called, but there are some Settings in the Bios which causes the problem or try updating the Bios. I had the same issue already 2 times and both of these worked.
It has but it hasn’t at the same time You just have to list enough builds and they will sell but some will still sit (have 1 rn that’s been for sale atleast a month)
I have a high-end Intel/Nvidia system that I built in a budget Zalman case that's all-black and has 2 side fans as well as the 3 front and 1 back, and a 360 AIO on top with push/pull and it's super nice and professional looking. Good case suprisingly.
Where can you download the fps counter you have in the corner i see it everywhere but dont know where to download. And also a nice vid as always elijah
Dude try without the sleeved cables first, if that isn't working swap PSUs. I've also seen a case just being haunted by Elma where everything works fine outside the case but once you put it in it starts having issues. Love the content man keep it coming 🫶
Hey, I have a question. I started pc flipping and it's doing great, lots of profit but that's the problem. How do I declare the profit I make ? I don't want to get in any trouble because of taxes and stuff. How do you guys do ?
Hey Elijah! I am an up and coming pc flipper, and I was wondering the method you use to install windows for all of your flips. Do you just install it normally, or is there a specific way that you have to do it? It would be super helpful if you could respond, thanks!
Super annoying when someone ghosts you on FB Marketplace. Communication goes well for 2 or 3 replies then nothing ? Like WTF !?! Just had it happened to me about a motherboard. Just tell me you changed your mind or your busy etc. It's not that hard to type something to let the other person know what's going on. You just have to move on in the end. Can't wait around forever. Tech moves fast. Speaking of the Montech Air 100 RGB, I just bought that case today to do my first modern build. Haven't built a PC from scratch in over 20 years but since my other hobbies are getting too expensive I figured I could try this out again with modern tech. I know the basic upgrading (RAM, SSD, GPU etc.). It's basically the wiring the PSU to the motherboard that I'll need help with but their are plenty of tutorial videos here on YT for that. Thanks again for sharing all your vids & motivating me to try again :)
My pc also sometimes restart instead of shutting down when I click on SHUT DOWN button, I never tried to fix it since it's rare issue happens like once a month or even rarer xD
Warzone!!!!! W quick question, I have a pc rn I’m flipping and it has an rx 5600 xt, do amd GPUs sell? It’s been 3 weeks, my price rn is at $490 and it has a 5 3600 don’t know why it isn’t selling
Hey so I want to start flipping PCs. But I live in a big tourist attraction area so there aren’t many used items near me. I do see that people sell their PCs so would it be better if I bought everything new and sold it there or would I not get any profit doing that?
I just flipped the same pc with a ryzen 1600 and a 1060 6gb no way. I was looking for benchmarks on games but couldnt find any from this time just olllld benchmarks. Ive already sold the pc tho. I got it took a really long time to sell and sold for 350 cad or 254usd. I first had it in a no rgb case then got a Sama argb mini atx case and it sold in like 2 days.
Just a heads up, The price the 2700x/3070 is absolutely fair, but the 2700x will severely bottleneck the 3070, even at 1440p. Even a 3700x will bottleneck the 3070 to a degree, depending on the game. I would highly recommend not paring a 3070 with anything less then 3700x or above.
I have a Question about the Video where you explained how to organize Pc builds and parts. How do you build up such a inventory. I’ve been flipping gor like a month and I have been picking the parts first and then looking for good prices. I couldn’t get spare parts to build up an inventory because I only buy the stuff I need. Can you help me? BTW love your vids ❤❤❤
I am always looking for deals and if it’s a good deal I buy it, even if I don’t need it You need money to build an inventory. I started only buying parts I need too
dude im just trying to sell my mini itx pc i just case swapped into the new DeepCool ch160 AND nobody is biting. if they do its "is this still available?" and then they ghost
Can you make the best cheapest possible gaming pc I have one currently but it’s horrible runs 20fps max with intergrated graphics not enjoyable to play on please help
Drop your thoughts on this video, it was recorded a little differently compared to my other episodes (due to vacation)
Thank you supercdk for sponsoring this video, be sure to check them out
⬇
Supercdk 25% discount code: SPLA
Windows 10 Pro($17): www.supercdk.com/sc/spla10
Windows 11 Pro($22): www.supercdk.com/sc/spla11
Windows 10 home($14): www.supercdk.com/sc/splaH
Office2016($29): www.supercdk.com/sc/spla16
Office2019($51): www.supercdk.com/sc/spla19
I like this style of vid
Awesome you starting to get companies sending you stuff, that's a plus so you don't have to spend on everything
Nice vid, just wish they were a bit longer :) (also what gpu would u pair with a ryzen 5 2600)
@@FreshToasted (for a flip) I would pair that cpu w/ a 1070/ 1660
i have a question to ask you do you think a ryzen 5 5500 and rx 5700 xt for 430 dollars is good and also what would you sell it for
Go to Control Panel then go to Power Options Choose what the power buttons do also Change settings that are currently unavailable and uncheck the box next to Turn on fast startup.
I also had this problem on one of my flips and this ^^ fixed it
Yea I had this problem with my first PC build and this was the issue. I had to go into my power button settings.
Elijah: Warzone Suks
Meanwhile...
Also Elijah: I love Warzone
Lmao, yeah warzone sucks.. but resurgence is fun
might be the power supply when you turn it off again try to switch the power supply off and see if it like tries to click back to life had this problem with my psu as it caused my system to have constant power going through it
I agree, I bought an older cyberpower prebuilt (had an evga 600W Bronze) to gut for some parts and it had this issue, seller told me he had to shut off the PSU, I swapped the PSU and it worked fine.
Dude Zalman used to be HUGE here in South Africa when I was growing up, theyve been around a long time... Good to see them back!
south afrtican as well. lessgggooo
@@kaiewing6137 Fellow Za!
The next series is going to have to be called "Flipping PCs to Pay My Mortgage"
FP2M
yooo
14:00 Try disabling fast boot on both BIOS and/or Windows settings. Hopefully this helps
you know it's a good day when elijah posts
Hunter Smith is the Goat!
Big shout out to Danny!! You’re awesome.
Can’t wait for the next episode to to see wha the problem was.
I've used a Zalman H1 case for almost 10 years now. It's absolutely massive and had held generations of PC hardware since I got it.
I had a Musetex GO7 case I had to put black tape on some wires on the wiring harness because it would short back on barely noticeable right under the power button. Then the Power option could be the culprit too.
14:20 There is a shortage between two pins on the motherboard which is responsible for power on button, maybe pcb is somewhat broken or track is shortened
bro is the king of bottlenecking, rx 6600 with a 8400💀
respect the grind Elijah
Alright E man im gonna need some longer episodes to binge and build my pcs to xD all love bro keep grinding im proud of you!
Hopefully a longer episode next time 🤝🏼
I think the reset cable might be bad or the 2 pin on the mobo. Try shutting döwn with the reset cable unplugged. Had similar issue with a pc.
Also keep up the good work this is so W to watch I really want a pc so bad
Bro bring hella consistent lately
I found your channel yesterday and binged season 1 and 2, I have really enjoyed it so far, keep up the good work!
Thats awesome to hear! New episode for season 2 is dropping this week👀
Zalman has been around forever!!! you should check out the Z1 iceberg and i3 A-RGB cases!
In bios, enable 'erp' and goto power setting and in control manger and select 'balanced' as the power plan. Either moght work. Iv had this issue before and this has sorted it
A friend of mine had a same problem - it turned out one of the fans which was connected via Moley was forbidding the PSU to shut off. So try unplugging every part - could be SATA RGB Controller, for example.
I love zalman cases. In my personal rig I'm rocking the Zalman z1 Iceberg and its a very cool white case.
Maybe check in the BIOS the power on options.
I had an older power supply that wouldn't let me power off the pc like yours. It sucks but you just gotta replace the PSU.
That old antec might be ok if its paired with an older motherboard, sometimes newer power/sleep states trip up PSUs that were made prior to 2014 or so.
I had that exact same issue with one of my pcs. The way I fixed it was I had to completely swap out the GPU. Then it worked just fine. The gpu that I took out also worked fine in another build so everything should work out fine.
It's something with the power settings
Hunter Smith is the goat! Always doin the most
14:06 Try Putting It in Rice
Is the i5 3470 a good cpu to use for flipping pcs, if yes what gpu should I pair with it?
I’m going to make a yt short answering this as well for the budget ballers but I would pair that with cards like the 1050ti, rx 570
Or older like the gtx 970 but I wouldn’t go older than what I recommended
Hunter Smith is the GOAT!!
@Ekuhags Lab there is a setting in the bios where the PC well turn on, on power loss resert the bios and it should fix it if that is the case. its normally called Restore AC Power Loss it is probably undewr APM config. And if it is not that I would then check the PSU sometimes the PSU forces the computer back on.
Nice build mate I build my pc in March thanks to your videos ❤
I thought i was the only seller on facebook who just gets left on read after the buyer asks if its available
I feel like it’s just Facebook thing. People are annoying
Zalman is an old brand, super popular in the early 00s. They've faded a bit into obscurity recently but seem to be making a bit of a comeback
Thanks for some info on them!
I LOVE YOUR CONTENT, GOOD LIKE ON YOU PC FLIPPING ADVENTURES.
You helped me quit my addictions❤
I have used many zalman cases, perfect cases for a flip :-)
W vid bro!
Banger video
abosolutly love you, you inspired me to check market place that one faitfull day and got me to score a fat deal on a 1650 oc for 60$ cad or 43$ usd
keep up the amazing videos
don't think that's a fat deal, but okay-ish deal since 1650 is mid now
@@bulldozerfx621 they go for 120$ cad on ebay at like 200 new
I dont know exactly what it is called, but there are some Settings in the Bios which causes the problem or try updating the Bios. I had the same issue already 2 times and both of these worked.
How do you go about getting coloured cables?
I was told you have to use the cables supplied with the PSU.
His name is Hunter Smith. Hunter Smith is the Goat.
Hunter Smith is the GOAT!
Format all drives, and update drivers.
13:20 no io shield was that on purpose or do you not have one?
Seems like market hasn't slowed down in your area, lucky guy.
It has but it hasn’t at the same time
You just have to list enough builds and they will sell but some will still sit (have 1 rn that’s been for sale atleast a month)
Didn’t think I would be asking this before lol but what’s your build for the Superi 46? Looks like it’s hitting
big W video
Hunter Smith is the GOAT
Hunter smith is indeed the goat
Your videos made me start flipping pcs and I got all the parts for my first flip yesterday
That's awesome!
I have a high-end Intel/Nvidia system that I built in a budget Zalman case that's all-black and has 2 side fans as well as the 3 front and 1 back, and a 360 AIO on top with push/pull and it's super nice and professional looking. Good case suprisingly.
Sounds like a pretty sweet system
HS is the Goat 🐐
What do u use to benchmark?
Where can you download the fps counter you have in the corner i see it everywhere but dont know where to download. And also a nice vid as always elijah
Had same issue with my PC a month ago
Dude try without the sleeved cables first, if that isn't working swap PSUs. I've also seen a case just being haunted by Elma where everything works fine outside the case but once you put it in it starts having issues. Love the content man keep it coming 🫶
zallaman cases are used frequntly by ztt
What is the screw driver you using
Hunter Smith is the goat ❤
Hey Elijah you should make some pc tips videos from time to time
Is the i5 10400f and rx 6600 good for a pc flip?
Swap the i5 out for a r5 5500 or 3600
@@speedie6127that'll require swapping the motherboard assuming they already have the parts. but if not yeah 3600 better cuz cheaper
Yeah that’ll be great. Basically what I built in this video with the i5 8400 build
Keep up the flipping content
Hey, I have a question. I started pc flipping and it's doing great, lots of profit but that's the problem. How do I declare the profit I make ? I don't want to get in any trouble because of taxes and stuff. How do you guys do ?
Hey Elijah, what temp and fps monitor are you using for your benchmarking?
msi afterburner
reset switch?
Hello!
Hello!
Why do you record your gameplay at 12 fps?
to turn it off just use the switch on the psu
Doesn’t really fix the issue though
I love how bro a couple episodes ago used to hate COD
Lmaoooo.. resurgence is fun
hunter smith is da goat
"like that smash button "
Hey Elijah! I am an up and coming pc flipper, and I was wondering the method you use to install windows for all of your flips. Do you just install it normally, or is there a specific way that you have to do it? It would be super helpful if you could respond, thanks!
Watch this video. I explain how I do it ruclips.net/video/ni0ZY59Kb10/видео.htmlsi=x6CXhjXVk0ZKbBs6
White definitely sells
bios update may help???😀
How do I donate?
Oh shoot, I forgot to add the link. Its in the description now
Goalz
Super annoying when someone ghosts you on FB Marketplace. Communication goes well for 2 or 3 replies then nothing ? Like WTF !?! Just had it happened to me about a motherboard. Just tell me you changed your mind or your busy etc. It's not that hard to type something to let the other person know what's going on. You just have to move on in the end. Can't wait around forever. Tech moves fast. Speaking of the Montech Air 100 RGB, I just bought that case today to do my first modern build. Haven't built a PC from scratch in over 20 years but since my other hobbies are getting too expensive I figured I could try this out again with modern tech. I know the basic upgrading (RAM, SSD, GPU etc.). It's basically the wiring the PSU to the motherboard that I'll need help with but their are plenty of tutorial videos here on YT for that. Thanks again for sharing all your vids & motivating me to try again :)
My pc also sometimes restart instead of shutting down when I click on SHUT DOWN button, I never tried to fix it since it's rare issue happens like once a month or even rarer xD
might be a MOBO issue since I see u have same mobo as me B450M DS3H
Mine happens everytime. Should be fun to try and fix it
Messi is the GOAT
HUNTER SMITH IS THE GOAT!!!!!!
Warzone!!!!! W quick question, I have a pc rn I’m flipping and it has an rx 5600 xt, do amd GPUs sell? It’s been 3 weeks, my price rn is at $490 and it has a 5 3600 don’t know why it isn’t selling
Hey so I want to start flipping PCs. But I live in a big tourist attraction area so there aren’t many used items near me.
I do see that people sell their PCs so would it be better if I bought everything new and sold it there or would I not get any profit doing that?
Also do you stay away from GPUs that were used for mining?
This looks like a powersupply problem
Hope this helps
I just flipped the same pc with a ryzen 1600 and a 1060 6gb no way. I was looking for benchmarks on games but couldnt find any from this time just olllld benchmarks. Ive already sold the pc tho. I got it took a really long time to sell and sold for 350 cad or 254usd. I first had it in a no rgb case then got a Sama argb mini atx case and it sold in like 2 days.
Just a heads up, The price the 2700x/3070 is absolutely fair, but the 2700x will severely bottleneck the 3070, even at 1440p. Even a 3700x will bottleneck the 3070 to a degree, depending on the game. I would highly recommend not paring a 3070 with anything less then 3700x or above.
I have a Question about the Video where you explained how to organize Pc builds and parts.
How do you build up such a inventory.
I’ve been flipping gor like a month and I have been picking the parts first and then looking for good prices. I couldn’t get spare parts to build up an inventory because I only buy the stuff I need. Can you help me? BTW love your vids ❤❤❤
I am always looking for deals and if it’s a good deal I buy it, even if I don’t need it
You need money to build an inventory. I started only buying parts I need too
@@ElijahsLab Thank you for the advice
Is 550w enough for r5 5600 and Rtx 3060 or 3070
Not for 3070 but maybe for 3060
What about a 3060 ti
550w is more than enough 5600 and 3070 needs round about 300w
5600 65 W rtx 3070 220W
@@richi2870 but not really recommended because the power supply will not last too long
I hate dealing with facebook market place, too much ghosts
dude im just trying to sell my mini itx pc i just case swapped into the new DeepCool ch160 AND nobody is biting. if they do its "is this still available?" and then they ghost
Damn you're young. Never heard of Zalman?! 🧐
hunter smith is the goat
bro did not fall off
Can you make the best cheapest possible gaming pc I have one currently but it’s horrible runs 20fps max with intergrated graphics not enjoyable to play on please help
What’s your budget?
@@ElijahsLab currently only have around 400 times have been quite hard recently
Discord noti gang
Hunter Smith if you're reading my comment you're the goat
Zalman are a og brand
Wait hold on. Elijah did you just say Warzone is one of your favorite games right now? I thought you hated warzone look how the turns have tabled 😂
Lmao yeah. Give it a month and I’ll be back to hating it 😂😂😂
@@ElijahsLab lol crazy because warzone is my least favorite right now it switches for me too