What Are Fencing Pliers?
HTML-код
- Опубликовано: 6 май 2015
- You can now support our channel! Learn more
www.simpleground.com/supportus...
Some simple tricks to use an uncommon, but very useful, fencing tool. This is one of my first videos, it is also one of the my most viewed. Please feel free to spend a moment and see what is new at the Simple Ground homestead.
If you are shopping for fencing pliers try these.
Good
amzn.to/2ij4UZV
Better
amzn.to/2iQLHQn
Best
amzn.to/2hWDqpH
Visit Our Website
Be sure check out our other content.
Website: www.simpleground.com
Patreon: www.patreon.com/simpleground
Instagram: simplegroundjourney
Pinterest: www.pinterest.com/simpleground/ 
Хобби
As informative as it is concise. In so many ways, the epitome of what a RUclips video should be (but so rarely is).
I have never built or maintained a wire fence but have seen many in my travels and wondered what tools were used to make them. This video helps me understand. Thanks.
You should buy one
I have only recently found out about this tool, and have been stretching fences (on my own land) for only about a year.
One thing your video showed that I found most enlightening was that the pliers can be used to hold a fencing staple. I have been using regular pliers, and not very successfully. Thanks for showing this feature.
That china copy has quite a blunt hook that may not do what older pliers do. I have 2 pliers from the 60-70's and are slightly different from each other but both work great. That long hook is also used to wrap the long end of a T post clip around barb wire strand or doing the same attaching woven cattle fence to T post.
Using top to hold staple = mind blown. Thanks for this!
+Laura Cook Blond it can be tricky when you are trying to hold the wire up too but it has saved me many smashed fingers.
I’ve had pair of these for over 30 years and used to use them on the job almost every day as an electrician. They’re kind of like a Dremel tool, once you have them for awhile you start to wonder how you ever got anything done without them lol. Many times I’ve been in a situation where I could only take a few tools with me and these were always the first tool I would grab. They’re super useful and can do so many different things. I’d choose these over my leatherman any time.
Cheers mate and happy trails
I am a 3rd year apprentice and I just bought a pair of these pliers for home use. Watching this video I was just thinking how useful these would be for a pre wire. I have recently changed from residential to industrial though so I don't think they would be very useful for me at work any more.
Have an old pair that once belonged to my great grandfather in 1940s. Always come in handy mending fence. Never thought of starting a staple that way. Makes it a lot easier. Thanks!
My search is done!!! Thanks for describing all of the functions! Spent years away from some of my tools and needed a good refresher, thanks very much.
I grew up on a dairy farm and used these A Lot during pasture season. Still use them to this day tying forms for concrete, etc. The original and best multi tool.
Simple and straight to the point, awesome video and thank you. I knew a carpenter who used these but he could never explain them in any way. I tried using them for carpentry myself but they didn't seem to fit the seen. This tool has done some odd stuff for work in many odd ways but now I know thanks to you and few other youtubers. This video was the best out of the 3-7 intel videos I watched. Yours being the last and the best so 1 in 7 in my life as a youtuber. Again, thank you for this.
High praise, thank you!
I've had pairs of these for years and never figured out the trick for starting staples. Thanks
+Quaderben So happy I could help.
yes never knew that either, but for the most part it is quicker to use your hands only
even better, for an embedded staple, instead of trying to swing the pointy nose into the staple like a carnival game, set the nose of the horn into the hoop of the staple and with your hammer, tap on the hammer face of the pliers forcing to nose under the staple and pulling the staple up.
Thanks for the video. I build concrete swimming pools and just bought a pair cuz they looked useful. Now i realize they will be really useful for some applications with my work.
Good video! I too grew up with these and some days you hate them. There are several designs out there but the Diamond Tool design is most common. What you were showing us was a Chinese copy. The tool was invented in the late 1870's when the open ranges of the west were being fenced. The tool evolved with the various patterns of barbed and woven wire. It was light and incorporated the function of several other tools so that a man on horse could carry it and ride miles of fence making repairs. Usually two such tools were used in tandem to make the long wire splice or telegraph splice as it was called. As you point out you can drive and pull staples, cut wire, twist wire and hold a staple. You missed the jaws up in the crotch of the handles which can grasp two wires together allowing a second tool to twist one around the other like a vice. You can grasp the end of a wire in the two openings of the jaws as a loop but close to a post then roll the rounded pick around the post to pull a wire tight. Your partner with his tool then drives a staple to hold the wire you pulled. So, it replaces a hammer, bypass cutters, crowbar, vicegrips, staple pick, and more. When I am working from a truck today I carry about 30 pounds of fence tools, but if I am on foot walking fence I just take two pair of these tools which weigh about 3 pounds. You trade tool functionality for weight.
The hammer side has another function, which is to serving as a hitting surface when using a standard hammer to drive the horn under a buried staple. You often cannot grip a driven staple nor swing the horn into the buried staple, but you can aim the horn behind the fence and staple and drive it through with a hammer. This is why old fence pliers generally have flattened and even mushroomed hammer sides; they've been beaten to death with hammers for decades ;).
I have used it many times this way.. Tommy
Awesome explanation. Simple, concise and to the point!
At the place I work i can take home tons of heavy duty bailing wire scraps and this info is useful to me thanks. Picked up an old pair of used craftsman wire pliers at a thrift shop and they still are holding up after all these years. Hope to put the 2 together.
Finally! I've seen these around and never knew what they were for (and I do a LOT of fencing!). Thanks for the handy tips, will buy one tomorrow
It will a worth the extra effort to find a pair that is well made and fits your hand well and opens and closes well with one hand. Best wishes.
Just bought one of these pliers today. Thanks for the useful tips.
Thank you for taking the time and making the effort to create this video.
This is just the tool I need! Thank you so much for sharing!!
I've never seen a formal video on these but I learned about starting a staple from you. Thanks for posing. July 19 2021
Cool! I was given a pair of these and did not have a clue what they were for!
When I was a kid, I found these in our workshop(we don't live on a ranch, instead the suburbs, which makes it odd to have one) and had no idea what they were, but I did figure out the cutters. Then one day when I WAS helping someone on a ranch, one said to the other, "Can you get the fencing pliers?" And here he comes with the same thing in my workshop. "Oh! that's what those are!"
Thank you Sir, very informative. I appreciate your time and training, you can teach an old dog new tricks.
Ive seen these but never new the application. Great video thanks!
So interesting! I found a pair of these but had no idea what they were. Thanks to the wisdom of Twitter, I got your vid. Thanks!
They are a very handy tool,
I also use them to hold staples to get them started,
I enjoyed the Video Thank you.
Brought back a lot of childhood memories 👍🏼👍🏼
Excellent video. Thank you.
Thanks for the informative video. Always good when you learn something about something you thought you knew pretty well.
Thank you for the comment. I'm really glad this rough old video has been so helpful for so many people.
By reading the comments you definitely won everybody over by how this pair of pliers is used for holding a staple! lol! I agree with the guy who said, MY fingers thank u! lol,
TIL. Have been using such pliers for years, but never knew all the features till today. Thx OP. : )
Thank you! I learned something new today.
Thanks mate - I have always been a little confused about this tool.. You've helped a lot.
good video I've had one of these for many years but never knew about the staple holding bit got some fencing to do that will save fingers thanks also you can get tight staples out by hitting hammer end.
That is right Roy. I was taught never to hit yhe hammer face with another tool to drive the pick under a staple but to use a hardwood stave or stick. The staple trick is even better. You use your stave to pull a wire tight with one hand by wrapping the wire around it and using it as a lever on a post. Put the staple in the tool jaw as shown then hold the pliers side on and strike the wire on the post with the staple. With skill you straddle the wire with the staple sinking it into the wood deep enough to stand on its own. Release the staple and use the hammer face face to drive it home. All with one hand.
Have been using the lower grips (between the handles) to grip the wire next to a post, and then pry it taught so my buddy can put a staple into it to hold it.
great presentation, Thank you, Rod
Thanks a lot .Great video , had no idea on how to use this tool .
using it to hold staples is gonna save me alot of hurt fingers! thank you
+jjhedder Juggling the staple, wire, pliers and hammer can be tricky. Holding the wire at the right height on the post by leaning on it with your non dominant side can help. Best of luck to you.
I bought one today and this is where it brought me so thank you for the informative upload. And I've just subscribed aswell I can learn a lot from you👍
Thank you for making this video
Stumbled onto this on accident… couldn’t stop watching. Cool vid 😎
Thanks.
Great video with helpful tips. Thanks
Thanks for the video, some functions I didn't know.
great, simple and concise. greetings from Scotland.
Thanks and hello!
The notch closest to the end is used to make tight turns around the standing part of the wire. Some folks refer to this as a twitch or twicher.
nice video, all uses clearly explained thanks..
Thank you so much for posting this video!
+u159411 You are welcome.
Thank you for the tips. I learned.
Hi, I've used these pliers for years and have used most aspects of the pliers except one great one I've never seen before, holding a staple with the pliers whilst hitting a staple with a hammer. It was worth the time just to see that one. I've hit my fingers so many times whilst banging in staples. Thanks very much. Cheers, John.
You are welcome. I must admit that I still have a hard time using them to hold the staple when I also have to hold the wire up on the fence at the same time. Leaning against the wire can help. I wish you the best on your coming projects.
Hi, I generally work as a volunteer with our local council, most of our work is actually taking fences down now that the trees are big enough and no longer need the protection of fencing. When we do put up pieces of fencing there is usually another old pensioner helping me!! Nice to see good educational videos. Cheers, John.
You are missing one more function: you grab the wire with the pliers and the curve sit on the post allows to pull the wire to have it tense when you staple.
Sounds complicated.
It’s not.
That’s the best feature on them,
Paul Zúñiga yep done that a many times
@Cecil Shoemaker how easily can they cut barbed wire?
Great video. Very helpful 👍
Thank you, I will use my pliers now as they were intended to be used. Thanks again.
+Jose Jolapeno Glad to help.
Awesome! I bought a tool just like that to pull staples not knowing its other many uses. Thanks.
I was thinking of adding a pair of these or plammers to my trapline toolkit, however your video has convinced me that I will still need both my trusty hammer and pliers on the line and likely if I were fixing/running a fence also. I think this one is better left as an "interesting keepsake." All the same, thanks for the video.
+Rusty Shackleford I'm really glad I could help. There are almost as many different tools as there are people different people. It is sure nice to have a demo before you buy a tool. Best of luck to you.
Rusty Shackleford you'd be an idiot to do fencing without fencing pliers.
Plammers are nice so you don't have to carry multiple tools!
To me installing wire clips on T posts is one of the best uses for this type of tool.
Thanks so much for posting this!
Great video- Thanks for sharing! 😊👍
Good video, I just bought one of these tools and I knew most of the functions, but not all.
+Ray Duerksen Glad I could help a little. Good luck in your fencing endeavors.
Outstanding Sir. Thank you.
Wow. I never knew that one tool could do so much!!! Thanks!
I'm glad the video helped.
I have a few of these and use them all the time. awesome tools. the second slots in the jaws are for crimping a clasp around a wire splice.
+Jamey Larrimore So true.
Works well also to place the loops which hold wire against T posts.......good video!!
I have my daddys first pair he bought about 60 years ago. the horned end is deformed with use. I of course have bought several pair since then and it was one of the first tools I bought my son. This past week we use one on the fence we were building, the same way my dad and I use to work together. Fathers, build memories with your sons, one day that is all they will have. Tommy
Thank you so much, this helped me a great deal
If you are shopping for fencing pliers try these.
Good
amzn.to/2ij4UZV
Better
amzn.to/2iQLHQn
Best
amzn.to/2hWDqpH
Simple Ground -best I have ever used www.acehardware.com/product/index.jsp?productId=1286444
Ryan K Not a bad price either.
Nice, I have the Channelock version in my truck box..and Irwin in my work truck.
So Irwin is in your work truck. That's nice.
do you make Irwin ride in the back and open all the gates?
I REALLY learnt something NEW today.... Thanks for the vid, sir !!!
Double thanks to you for watching. Is there any other tool that you would like to see?
Tool to cut corrugated metal?
+Kansaseq I have a video about using a circular saw with a revised blade. ruclips.net/video/icit0TdkaZc/видео.html
+Kansaseq I have a video about using a circular saw with a revised blade. ruclips.net/video/icit0TdkaZc/видео.html
+Kansaseq I have a video about using a circular saw with a revised blade. ruclips.net/video/icit0TdkaZc/видео.html
Excellent. I just ordered one for demolition work. I have a serious pliers addiction.
Great video, sir.
Oooh... that is pretty nifty. :D I didn't know they had such a tool. Cheers! Thanks again for the informational episodes... Onto the next episode!!!
+Middle Way I'm glad to hold your interest. Thank you for plowing through. You've made my day.
THANK YOU for posting! mine is on its way...yay:-)
+urtheanswer Your welcome, good luck!
Very cool, thanks for the video. I'll be getting a pair :)
Excellent! Thanks.
Thank you, this is really good info
Great video. Thank you
Good job!
If you have a pair of the old Diamond's you have something useful. Most of the newer Chinesium stuff out there now are pure worthless. Thanks for the video!
Agreed. Just found some diamond brand for my brother in law and I.
Very good Sir, thank you.
Glad you showed me how to hold the staples with those,,, beats taking your gloves off every time
I bought a pair of these knowing I’m starting a fence. Time to learn how it works lol
thx! i'm new to farm land and am finding a need to work with wire like this.
Thank you learn something today.
Thanks for the video.
nice, thank you for sharing !!!
The hammer part and the pointy part go together if you have staples that need to come out that are in there good you put the sharp tip in between the staple and post and hit the hammer part with a real hammer hope this clears it up I'd know own 1700 acre ranch
I didn’t have a fence pliers the last time I worked on a barbed wire fence. Had to use my trusty old Knipex Alligator pipe pliers but got the job done. Stopped by Tractor Supply Co in Albuquerque this morning to get a fence pliers because, guess what? I have to do MORE fence work at the same farm...an hour east of Superior, Wis-CAHHN-sin. The nearest Mills Fleet Farm is... in Superior! Not too handy. Best to have all I need NOW! 😄😄
i need one i dont have like this in Jordan hhhhh nice work
good stuff.
Very helpful. Thanks.
You're welcome. Thanks for the feedback.
Always wanted to know; thanks
thanks for sharing
Thanks, I was doing some fencing and lost my linesman pliers. My mother, whom I was doing the fencing for went to the store to buy me pliers. She came back with this thing and I was like wth is this thing. I find it a little big and bulky to be cutting wires close to fence posts and in between the holes in the fence. Thanks for the video
Thanks mate!
The original multi-tool! Also good personal protection.
Thank you!
I do HVAC work and use 1 to nail in the floor boots its small enough to fit it tight spots unlike a normal hammer
I’ve been putting a lot of fence up since we started a small farm. I just got this tool after my hands were killing me from using needle nose and dull wire cutters lol
Not that I’ll ever do this but it is good to know .
very helpful
Staple starting is one of the better uses, starting those rounded staples can be a real pain.