pretty nice you made a safer drivers compartment to protect you if you back up into something. I would recommend using some closed cell foam for padding on the weights on the inside.
Oh for sure made a big difference! I might be pushing the limit of the machine but I’ll do my best to not abuse it. Glasses are still going good just a bit scratched.
great upgrage i think you should have went alittle lower an backso you could still grease not being able to get to anything is not good but great job my friend
@@bobbyspenser7304 thanks for watching! The placement was really determined by exhaust opening. I wanted it to line up with the counterweight opening so I wouldn’t have to modify the exhaust.
How much weight do you think this little machine can lift, I'm looking into getting one to help me pull engines 600-800 pounds and do a little yard work. do you think with the Counterweights it could handle it?
Got these off FB. They are from Titan Attachments, but they are really heavy and I only use them on 30-40ft pipe since they can spread really wide. If you don’t need to move long pieces of material I would recommend the smaller wolverine forks that are at the auctions.
Why would you feel compelled to try and belittle someone else's home? He's taking care of what he has and is obviously proud of it (just as he should be). Try not being a jerk a little more often.
Nice work buddy! Keep those vids coming!
Nice upgrade! Thanks for posting 👍
Thanks Mike! I watch your videos!
pretty nice you made a safer drivers compartment to protect you if you back up into something. I would recommend using some closed cell foam for padding on the weights on the inside.
Had not thought of that. I will consider that depending on how often I come into contact with the weights. Thanks!
Wow, cool! nice job.
Thank you!
Keep them coming 💯👊💯
Nice work. That amount of weight should make a big difference. Time to move more pipes and see how it does. Bummer about your glasses.
Oh for sure made a big difference! I might be pushing the limit of the machine but I’ll do my best to not abuse it. Glasses are still going good just a bit scratched.
Good job should really help.
What pallet forks set up are you running? I'm thinking about making some, but I'd rather buy them if the price is right.
They are wolverine forks, I got them at the auction for about $800 dollars after fees and taxes.
@@96marrufo Thank you.
great upgrage i think you should have went alittle lower an backso you could still grease not being able to get to anything is not good but great job my friend
@@bobbyspenser7304 thanks for watching! The placement was really determined by exhaust opening. I wanted it to line up with the counterweight opening so I wouldn’t have to modify the exhaust.
Raise the pressure on your 2 pressure relief valves to say 2900 PSI. Makes big difference!
What are they normally set to?
How do you do that?
I have a egn 360T where did you get your forklift attachment from?
@@greg1526 the small forks from RB auction and the big ones off facebook marketplace.
How much weight do you think this little machine can lift, I'm looking into getting one to help me pull engines 600-800 pounds and do a little yard work. do you think with the Counterweights it could handle it?
It’s definitely got more power than you think, it just needs some extra mass near the back.
Can you send a link where you bought those weights?
I don’t have a link, bought these off facebook marketplace.
How much for the skid?
Good Morning! Where did you get the fork setup for your machpro skid steer? Thanks
Got these off FB. They are from Titan Attachments, but they are really heavy and I only use them on 30-40ft pipe since they can spread really wide. If you don’t need to move long pieces of material I would recommend the smaller wolverine forks that are at the auctions.
Can you share where and you purchased this?
I bought the machine at an auction and the counterweights off Facebook marketplace.
@@96marrufo okay thank you.
Is the mini still for sale and where at
No, the extra skids are gone.
For some reason nearly all the videos,not just yours seem to have to incorporate music. I don’t like that
Hi, Why didn't you just pick the weights up? Heck, I used to do three sets of ten reps each with 275 pounds. Shalom/gw
@@googleboy7 there’s no need for me to lift the weights when I have tools that can do it for me.
Lol that’s not a house that’s a single wide
You are correct, either way, it is home to me.
Why would you feel compelled to try and belittle someone else's home? He's taking care of what he has and is obviously proud of it (just as he should be). Try not being a jerk a little more often.
@@jeffconquest3350 clearly there’s a difference between a single wide trailer and a house either one can be a home but only one is a house, sir