Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Never seen such clear instructional video with explanation. even when you open or tighten the nuts, you showed it. Amazing and thank you.
Thanks for watching, appreciate that
He's a pretty nifty mechanic, i loved his process of diagnostics and reassurance to substantiate is replacement fix
Excellent video, but you seem to have left out how to vacate/vacuum the system.
I was doing same work yesterday night on my honda , almost done .Thank you
Great, thanks for your feedback
Thank you for the video. I would suggest next time you tell us make, model, engine type and production year.
Thanks, it chefrolet optra 2008
Sometimes people put too much freon in and screw up the vacuum balance as well.
Yes and damage compressor as well
Good information!
Thanks
How did you pressurize the system to 200 psi before adding the refrigerant to see if there were potential leaks ?
Just by a can of refrigerant and connect and add some to the system and trust me you will see the leaks I did that and found my leak right way now I gotta replace my high pressure line but imma buy the set and do both since it’s a 20 year old car
thank borats brother
I watched many of your videos. They are all useful and clearly presented. Thumbs up !!!
Thanks for watching, glad you liked them 🙏🙏
I wish it was this and not the evaporator in my car. This seems way easier than having take apart the interior dash ☹️
Did you have to put new oil into the compressor as well?
Gonna have to try on my 2012 Camaro. Blows hot air I could feel it turn hot as I added in the freon
I recharge my ac using R12a. It works good that means AC blows cold air for 1 week then after 1 week blows hot air again. Ac lights keep blinking
Very good video. But it was very hard to understand what you're saying. But very good video.
Oh, thanks
I believe he was loud and clear
I could understand him very well, thanks
We’re did u get that type of hose at
RockAuto is a great site for car parts
Brought to you by Borat 😂
What are the causes why the high pressure hose (both ends of fittings) leaks?
Vibration, and the wickest point is between the joint and the hose, because there is not much flexing there
Did you replace the replace the low hose or high hose?
What do you lubricate the bearings with?
Lithium grease maybe
What model car is this I’m looking for a Nissan Sentra module
It's chevy optra
first comment from me
Hello there 👋
Lubricate the O ring with what??
Refrigerant oil
@@AliMECH thank you
2:40
Where is compressor oil?
Way too much dissertation
Never seen such clear instructional video with explanation. even when you open or tighten the nuts, you showed it. Amazing and thank you.
Thanks for watching, appreciate that
He's a pretty nifty mechanic, i loved his process of diagnostics and reassurance to substantiate is replacement fix
Excellent video, but you seem to have left out how to vacate/vacuum the system.
I was doing same work yesterday night on my honda , almost done .
Thank you
Great, thanks for your feedback
Thank you for the video. I would suggest next time you tell us make, model, engine type and production year.
Thanks, it chefrolet optra 2008
Sometimes people put too much freon in and screw up the vacuum balance as well.
Yes and damage compressor as well
Good information!
Thanks
How did you pressurize the system to 200 psi before adding the refrigerant to see if there were potential leaks ?
Just by a can of refrigerant and connect and add some to the system and trust me you will see the leaks I did that and found my leak right way now I gotta replace my high pressure line but imma buy the set and do both since it’s a 20 year old car
thank borats brother
I watched many of your videos. They are all useful and clearly presented.
Thumbs up !!!
Thanks for watching, glad you liked them 🙏🙏
I wish it was this and not the evaporator in my car. This seems way easier than having take apart the interior dash ☹️
Did you have to put new oil into the compressor as well?
Gonna have to try on my 2012 Camaro. Blows hot air I could feel it turn hot as I added in the freon
I recharge my ac using R12a. It works good that means AC blows cold air for 1 week then after 1 week blows hot air again. Ac lights keep blinking
Very good video. But it was very hard to understand what you're saying.
But very good video.
Oh, thanks
I believe he was loud and clear
I could understand him very well, thanks
We’re did u get that type of hose at
RockAuto is a great site for car parts
Brought to you by Borat 😂
What are the causes why the high pressure hose (both ends of fittings) leaks?
Vibration, and the wickest point is between the joint and the hose, because there is not much flexing there
Did you replace the replace the low hose or high hose?
What do you lubricate the bearings with?
Lithium grease maybe
What model car is this I’m looking for a Nissan Sentra module
It's chevy optra
first comment from me
Hello there 👋
Lubricate the O ring with what??
Refrigerant oil
@@AliMECH thank you
2:40
Where is compressor oil?
Way too much dissertation