ROLLOVER: "The best, easiest and most effective way to applicate! No beam or supports!
HTML-код
- Опубликовано: 2 окт 2024
- Welcome! Please see our new Rollover product sheet at: bit.ly/XW2lYt - For contact information, please click "read more".
With Rollover you can applicate easier and faster than before on large advertising formats. There are no disturbing elements above the roll that prevent access to the material. One Rollover per employee and you have a complete workstation.
Contact us at:
www.rollover.no
Mail: rollover@rollover.no
Phone: +47 69 89 88 88
Facebook: / rolloverapplicator
Rollsroller vs. the new Rollover applicator and laminator machine for your laminating jobs -
Please compare and make your own decision. - Наука
Thanks for asking:-) The roller is operated by compressed air, normally in the area of 5,5 - 6,5 bar. This generates a downward pressure of approx 6lbs/0,5 square inch, and will be right for most medias/substrates. The roller pressure can easily be adjusted by adjusting the compressor, and as such adapted to applications on softer substrates, boxes etc. You will be able to find the correct pressure for special jobs by first conducting a small test.
Thanks for commenting! You are absolutely right - laminating can hardly be more easy & efficient than with a Rollover!
will it damage the roller if you are trying to apply graphics to a 1/2" piece of MDO Board.? When it rolls over the corners?
No, it will not damage the roller as you roll off the Board, and when you need to start rolling on the Board, you would lower the roller from the upper position.
Svein Ove Martinsen
A few people are asking about pricing. I just received a quote for $22,000 for a 5x10 work area table.
It doesn't show how she web's the Application tape into the roller?
Hi Jeff, to view the easiest way to premask With the Rollover, please watch this video: Premasking: 3 - Premasking with the Rollover
Thanks,
Svein Ove Martinsen
We mount to 1/2" boards,even 3" thick medias. We use off cuts so the roller does not have to "fall off the edge". at either end of the media we are mounting to.
Fantastic product, and we are proud to be the UK Dealer!
How much price
Hello ... I would like to know the value of this machine for delivery here in Brazil
Dealer in india?
You would have to run an air compressor hose into the machine? or is it built in?
Yes, you need to Connect an external compressor.
Svein Ove Martinsen
ok cool I have a quote in from ND Graphics, another question I have is does it have any physical downward pressure, outside of the weight of the top roller itself? ND aid yes but it's not listed in the specs on the brochure, if it does how much PSI over and above the weight of the roller does it apply?
Hi Kevin, take a closer look, and you will see that there are significant details that positively differs the Rollover from RollsRoller. The most obvious is the fact that there are no massive construction over the roller hindering the action of the operator. You should also notice the rounded housing of the sliding arms, and the ergonomic handle with protected activation switch. These are details much appreciated by the users for making the daily use easier, quicker and more efficient.
Thanks a lot to our viewers & customers in the US/Canada! We will soon be extending our distribution network as a response to the great interest from you guys!
very nice!!!easy!!
nice....great.....
I liked the fact that there is no frame above the shaft. This allows interference control the attached material.
Can you use a knife and cut on that light table? Seems like a great idea if it works as a work table as well.
The illuminated glass bed is perfect for cutting, and all Rollover models are delivered With self-healing cutting mat as standard. This takes the accuracy and Comfort to an even higher level, and underlines the versatility of the machine.
I bought a CWT table. I've had it for 2 months and nothing but problems. At this point I hate it and I feel like I paid 12K for a work table that does not work. I keep getting excuses about the delay in fixing it. Totally disappointed.
Hi Eric, - being a manufacturer of Flatbed Applicators ourselves, we have never been impressed by the construction nor quality of the machines coming from CWT. If you are considering a high quality Rollover machine as an alternative, I would be more than happy to assist. Please use rollover@rollover.no for any questions you might have.
That would be fine if I didn't have 12K invested in this table but I do and I am stuck with it.
Why come here and complain then? Go blow up CWT video's where people actually care about CWT tables.
Dean Murphy first of it none of you business what I. Know what I mean? Besides I forgot I post this. It was fixed and works like a charm. I really like the table, now.
Good I want bayye
Fantastic! It looks very good!
It`s great
How much cost the table
Hello Martin, thank you for the inquiry. Please send a mail to rollover@rollover.no with your details and we will get back to you asap. Thanks, The Rollover Team.
little too secretive about cost of the tables
who's ripping off who, looks exactly like the RollsRoller,
and the woman - she is beautifull