It's my first time to see a hack that works on RUclips , almost called a plumber but decided to check RUclips first then BOOM I saw your video and I did the first step you did , my shower pressure now is normal...thanks you saved me a few bucks .I'm subscribing immediately
THANK YOU! I've tried a couple different shower heads trying to find one that has good pressure. I probably use more water because I have to shower longer when the water barely comes out. Especially for those of us with long hair.
I watched a few of your videos before I tackle a shower head replacement. As always you provide great tips and especially about the restrictor. Thanks again.
thanks So very much Bill, for almost 6 months I was putting water to Bucket and taking bath .. but from today . I can say .. I took a shower :-) at last :-)
Bill you are a bloody life saver mate! My shower is similar and weak as p***! I didn't even know manufactures put these things in. I'll try this. Cheers and thanks.
Hurrah! I now know how to remove the shower head as this is exactly the same as mine. I can now clean it sad whilst I’m at it, I will remove the water restrictor which I didn’t know existed. My water comes out of the head at the same speed as how it does in the first film.
Was in a caravan park that had an instantaneous hot water system that would cut out mid shower due to low water flow rate resulting in freezing water in the shower. Removed the the restrictor and perfect hot showers for the rest of the stay.
Ok, thanks mate. Very helpful. This was my problem. I shower I half the time using the same amount of water but less electricity running the fan and light.
If you have a pick tool you can also pop out the o-ring rather than removing the entire flow regulator and try the shower again. In my case it was enough for me to finally get the flow rate required for Satinjet technology to work its magic.
Fantastic video, very informative. I don't suppose this restrictor tech is also fitted to Bath shower mixer taps??? Our landlord had to replace the bath shower mixer tap a couple of years ago, and since the shower pressure has been rubbish.
So glad I've found your videos. Keep up the great work. New subscriber here!! Would love to see how to level a backyard that already has grass but don't want to dig up the grass (because it's great, thick grass) just need to know how to level it out please. If this is possible without having to dig up my lawn. Cheers Bill. 🍻
Use washed river sand. If it’s not washed, it can be full of weed seeds. Spread it on and make sure you leave some of the grass showing. Just repeat it over a few weeks/months until you are happy.
I know right... Hardly see any Aussie RUclipsrs posting things. Probably afraid they'll lose money by teaching others or give their competition a leg up but if anything, this would make you want to hire Bill even more because you know he knows what he's doing.
On the restrictor usually you gone a find a little rubber O ring inside , try first with out the O ring and put back the restrictor and try, because sometime take out all the restrictor can be to much
Something no one talks about is taking the restricters off of the faucets and shower heads to see if there is debris built up. I live in a sandy area and I have to clean sand out of mine twice a year.
@@Ohkeh640yeah I lived in a rental and the plumber said the flow was crap and he removed the restrictor and showed me how. He said it's crap because we were really high up and there was lower than normal water pressure compared to ground floor apartments.
@Billshowto - how were you so sure the restrictor was not in the shower head itself ? maybe the shower restrictor was the black piece seen at @2.19 to @2.20
I tried this and found a rubber seal in the shower head with a mesh centre.. i assume this is the restrictor. I removed it and didnt see any noticeable pressure difference, but saw water weeping out the shower head thread so i stuck a screw driver through the mesh and removed this part keeping the rubber seal which i put back in. Pressure difference certainly not as noticeable as this but might be a slightly better. My shower head is 400mm square so that may make a difference. Pleased it's out though regardless. Thanks
Hey mate, Is this the reason why my rain shower head is making loud noises when I turn the pressure up? Im forced to have no pressure just so I dont get i industrial deafness.
Nice one Bill. Wondering if you can suggest something please. I was changing a shower head and dropped the wrench. It took a chip out of the acrylic shower base. Do u recommend something I can patch it with, it's probably a qtr size of a one cent piece, so it's pretty small. So looking for something waterproof but also in a similar creamy colour to the base. Was thinking some maxisil coloured silicone seslant from bunnings. Thanks in advance.
Hey bud, I just bought a shower-head and it has a brass nut that screws into the wall, but it doesn't have any kind of 'stopper' so it keeps screwing deep into the tiles, so I can't work out how to tighten it as the shower head just wants to spin. Is there a simple fix to this or should I return the shower head?
So when my showerhead is on the shower, it’s all low pressure and stuff but when I turn it on massage, it throws me down because it’s so strong. Why is the massage regular but the shower is not.
My shower head I honestly don't think is my issue. Because we have taken off the shower head and without anything placed on. It's still not as we would like it to be. What else can it be?
The reason you have that filter is not to reduce water flow or save water. It’s there to prevent debris from getting to the shower head 🚿 and block the holes. It’s more difficult to unclog the actual shower head if blocked. If the filter is dirty, just clean it. Don’t damage it or put a hole in it. If you do that you reduce the lifespan of the whole shower head because sooner or later the debris will clog the shower head and you will need replacement
That's not a filter though. The O ring changes shape according to the flow of water blocking or opening holes in the flow regulator to maintain the same flow rate whether you have not enough flow or too much. My shower had a mesh filter in the rain head and hand shower and a flow regulator in the part that connects to the wall.
Do what I've done for years, remove it before you install it in the first place, don't even bother waiting for the head to lose pressure. These things may work fine on some hot water systems, but on instantaneous, they are useless. You need pressure to keep the gas system delivering hot water.
It's my first time to see a hack that works on RUclips , almost called a plumber but decided to check RUclips first then BOOM I saw your video and I did the first step you did , my shower pressure now is normal...thanks you saved me a few bucks .I'm subscribing immediately
THANK YOU! I've tried a couple different shower heads trying to find one that has good pressure. I probably use more water because I have to shower longer when the water barely comes out. Especially for those of us with long hair.
Bill explains things simply does the job in real time no fast forward or edits easy to understand 👏🏻
👍
I saw a cut there at 5:29
I watched a few of your videos before I tackle a shower head replacement. As always you provide great tips and especially about the restrictor. Thanks again.
You’re welcome 👍
Just fix up my shower head after watching your other resetting the shower taps thank you ! it finally work without dripping !
Extremely helpful Bill. Highly professional vid containing all the info needed.
thanks So very much Bill, for almost 6 months I was putting water to Bucket and taking bath .. but from today . I can say .. I took a shower :-) at last :-)
Just did this to both my showers, pressure is better and hot water comes out a lot quicker. Thank you
You’re welcome 👍
Great video. I always lay a rag over the drain (or close the drain, if it's a sink.) I only had to lose one screw down the drain to learn that trick.
Thank you so much I was tired of taking a shower using this shower head. Now it feels so nice!!!
Did this to my shower 100% better. Thank you
Glad I could help👍👍👍
Exactly what I was looking for, thank you for taking the time to share your knowledge and tips
Bill you are a bloody life saver mate! My shower is similar and weak as p***! I didn't even know manufactures put these things in. I'll try this. Cheers and thanks.
Top notch stuff, Bill.
Been spreading the word out for this channel, hope it keeps gaining popularity!
Much appreciated 👍👍👍
Hurrah! I now know how to remove the shower head as this is exactly the same as mine. I can now clean it sad whilst I’m at it, I will remove the water restrictor which I didn’t know existed. My water comes out of the head at the same speed as how it does in the first film.
Thanks for the great explanation. I'm about to try it. I HATE low pressure showers.
👍
Learn something new every time I watch your content. Thank you
You’re very welcome 👍
This channel is the best out of all
Thanks mate, we've got that exact shower head, so I'll take the restricter out, thanks for letting me know where it is Bill.
You’re welcome, enjoy the great shower👍
Reducing the amount of water...means I stay in the shower longer..... Thanks Bill. Weekend project coming up.
Thanks Bill! This is just what I was looking for. You're a legend, mate.
Glad I can help 👍👍👍
Took the words out of my mouth
Great tute again Bill, spreading the word to anyone who needs help. Keep up the excellent work and thankyou🎉 for taking the time to help others
Thanks for the tips! Great video. Im going to try this on my shower right now
Best video regarding the typical shower head.🙋🏻🤗🙏
Was in a caravan park that had an instantaneous hot water system that would cut out mid shower due to low water flow rate resulting in freezing water in the shower. Removed the the restrictor and perfect hot showers for the rest of the stay.
I'm going to try this solutions today. I'll be updating . Video is great.
Ok, thanks mate. Very helpful.
This was my problem. I shower I half the time using the same amount of water but less electricity running the fan and light.
Thank you so much! Will definitely do this to my shower.
👍👍👍
Honestly feel like you need theme music :)
We just brought our first house and doing alot of diy so these videos are super helpful thank you :)
You’re very welcome 👍👍👍
Thanks Bill. I will now check my kitchen tap, it's horrid. Super low pressure.
Kitchen tap will most likely be the aerator. I have a video on that also 👍👍👍
Could also try the water shutoff knob underneath the kitchen sink.
Thank you very much for this helpful video.
Nice one Bill. who knew!!!!
Didn't know about this. Thanks Bill 👍👍
👍
On the next Billshowto could you show us how to win the lotto every time. Thanks.
Your videos are the best mate . Keep it up
Very informative! Thank you!
Well done buddy.
I needed this advice 🙌
👍
If you have a pick tool you can also pop out the o-ring rather than removing the entire flow regulator and try the shower again. In my case it was enough for me to finally get the flow rate required for Satinjet technology to work its magic.
There's a special place in hell for whoever invented water restrictors.
Fantastic video, very informative. I don't suppose this restrictor tech is also fitted to Bath shower mixer taps??? Our landlord had to replace the bath shower mixer tap a couple of years ago, and since the shower pressure has been rubbish.
Fantastic thanks
Brilliant, thanks Bill.
So glad I've found your videos. Keep up the great work. New subscriber here!! Would love to see how to level a backyard that already has grass but don't want to dig up the grass (because it's great, thick grass) just need to know how to level it out please. If this is possible without having to dig up my lawn. Cheers Bill. 🍻
Use washed river sand. If it’s not washed, it can be full of weed seeds. Spread it on and make sure you leave some of the grass showing. Just repeat it over a few weeks/months until you are happy.
@@wadeasecond thank you so much. Will definitely start giving this ago 🤙
Brilliant 👏
Nice one Bill, who knew!!
👍👍👍
Love that shower head too..
The man! Thank You
Brilliant!🤩 Thank U for sharing🙏🙌🙌
Get a go pro! Love your videos
Excellent , well done
👍
Thank goodness an Australian How to ...
👍
I know right... Hardly see any Aussie RUclipsrs posting things. Probably afraid they'll lose money by teaching others or give their competition a leg up but if anything, this would make you want to hire Bill even more because you know he knows what he's doing.
On the restrictor usually you gone a find a little rubber O ring inside , try first with out the O ring and put back the restrictor and try, because sometime take out all the restrictor can be to much
Restricters must go every time☝🏽🤙🏽🤙🏽❤️🙏🏽
Great video but never mentioned, do you have to turn off the water at the mains supply before doing this?
No, as long as your taps are off no water will come out the shower head👍
Something no one talks about is taking the restricters off of the faucets and shower heads to see if there is debris built up. I live in a sandy area and I have to clean sand out of mine twice a year.
Shower heads will have a restrictor whilst taps/faucets generally have an aerator. I have a video on the aerator as well 👍👍👍
BTW...Do I need to shut the water off at the main before I start ?
@@natasha8597 no
Are the restrictions an Australian thing or would they have them in the uk?
No loctite or ptfe tape? It might leak now behind the tiles!
Also it's always good to add some silicone grease to the o-rings/washers/seals
Do plumbers remove these restrictors?
@@Ohkeh640yeah I lived in a rental and the plumber said the flow was crap and he removed the restrictor and showed me how. He said it's crap because we were really high up and there was lower than normal water pressure compared to ground floor apartments.
Brilliant! Subscripted
Thank u. I'll leave another comment later once I try this on a callback I've just had😂😂
@Billshowto - how were you so sure the restrictor was not in the shower head itself ? maybe the shower restrictor was the black piece seen at @2.19 to @2.20
No that's the rubber seal. That's why you don't have to use PTFE tape when you screw the shower head back on.
Thanks bill
👍
Thank you!
Thank you gonna try this
👍
thankyou
Where are you located?? Do plumbers deal with removing restrictors and twisting taking apart all the shower parts? Thx
Great Video, are restrictors mostly colored red?
I have come across a variety of colors 👍
What if the wall fixture won’t come off ?
Top Stuff 👍
👍👍👍
Top stuff mate👍
👍
I tried this and found a rubber seal in the shower head with a mesh centre.. i assume this is the restrictor. I removed it and didnt see any noticeable pressure difference, but saw water weeping out the shower head thread so i stuck a screw driver through the mesh and removed this part keeping the rubber seal which i put back in. Pressure difference certainly not as noticeable as this but might be a slightly better. My shower head is 400mm square so that may make a difference. Pleased it's out though regardless. Thanks
The mesh filter is to stop crud getting into shower head and blocking the jets. You've probably got a restrictor upstream of that. HTH
Hey mate, Is this the reason why my rain shower head is making loud noises when I turn the pressure up? Im forced to have no pressure just so I dont get i industrial deafness.
Nice one Bill. Wondering if you can suggest something please. I was changing a shower head and dropped the wrench. It took a chip out of the acrylic shower base. Do u recommend something I can patch it with, it's probably a qtr size of a one cent piece, so it's pretty small. So looking for something waterproof but also in a similar creamy colour to the base. Was thinking some maxisil coloured silicone seslant from bunnings. Thanks in advance.
Surgu is great. I fixed the rubber gasked on my washing mashine (next to the door) , it's lasted 8 years.
Hi Bill, are there restrictors also in the hand shower heads?
What brand is the shower head
What brand is this shower head?
What brand/model is your shower system?
I see on some mixers it says some cartridges are 35mm and some are 40mm why is this on the boxes? What is the difference? TIA
the difference is 5mm
How do you clean the head if it’s got sand in it ? ( plumbing problems)
Hey bud, I just bought a shower-head and it has a brass nut that screws into the wall, but it doesn't have any kind of 'stopper' so it keeps screwing deep into the tiles, so I can't work out how to tighten it as the shower head just wants to spin. Is there a simple fix to this or should I return the shower head?
You can add more Teflon tape to the threads or use lock tight glue
@@billshowto thank you! Shall try this
What’s ur area of operation .. where r u based ???
My shower looks like this only thing everything is in one so I will check it to see if it has a restrictor
Any idea how to fix a slow ceiling fan? 3 of my ceiling fans have slowed right down. Cheers
the capacitor needs changing its under the bell shaped bit, happened to mine
@@Howdy671 how do I fix the fan in my bathroom it doesn’t work and the whole bathroom steams up
@@Ohkeh640 measure it and go to the hardware and get a new one, it probably plugs into a regular power point in the roof
Flow restrictors reduce water volume rather than pressure.
Ty
So when my showerhead is on the shower, it’s all low pressure and stuff but when I turn it on massage, it throws me down because it’s so strong. Why is the massage regular but the shower is not.
Can you just buy a higher pressure head, that does not have the little restrictor gizmo in there?
Unfortunately, Most have them. It’s for water efficiency 👍
Shower head manufacturers are required by law to put them in every shower head in the US. 😤
Amazing all the work that goes into that shower design only to be ruined by that red piece of (planet saving) plastic.
Surely it's in to make it 'feel' like being in the rain and not supposed to come out so quick? Fair enough cleaning the gunk out.
No, all new shower heads have them 👍
Are you accepting new clints?
Yeah, come to my house and fix everything
i like it
Increased the flow only pressure went down as flow increased ......pressure is created as flow is decreased.
My shower head I honestly don't think is my issue. Because we have taken off the shower head and without anything placed on. It's still not as we would like it to be. What else can it be?
... this is applicable to like....10% of showers tops? This configuration is nothing like my own showerhead setup. No hate just putting it out there.
I’ve done this 1 million times I just use a drywall screw and screw it into the plastic and then pull it out with a pair of pliers
Good idea 👍
1/4 inch drill bit works well also.
Hi you never tightened up the Allen key fitting
Legend has it, the grub screw is still not tightened.....
The reason you have that filter is not to reduce water flow or save water. It’s there to prevent debris from getting to the shower head 🚿 and block the holes. It’s more difficult to unclog the actual shower head if blocked. If the filter is dirty, just clean it. Don’t damage it or put a hole in it. If you do that you reduce the lifespan of the whole shower head because sooner or later the debris will clog the shower head and you will need replacement
That's not a filter though. The O ring changes shape according to the flow of water blocking or opening holes in the flow regulator to maintain the same flow rate whether you have not enough flow or too much. My shower had a mesh filter in the rain head and hand shower and a flow regulator in the part that connects to the wall.
After show it i love shower 😜
Do what I've done for years, remove it before you install it in the first place, don't even bother waiting for the head to lose pressure. These things may work fine on some hot water systems, but on instantaneous, they are useless. You need pressure to keep the gas system delivering hot water.
Just remove flow restrictor.
Dont understand why they need restrictor to save water. Just pinch the valve.