Thanks for the video, I have the streetfighter v4s, it seems that V2 has more plenum space vis a vis V4. But I was able to tidy-up the wires on the exterior lol.
I stripped the torx bolt and thought I was screwed, but then realized it wasn't holding the fender to the bike so I disconnected the wire, removed the fender and just broke the two pieces apart.
Same thing happened here, so had to break the pieces. Mine was a black torx screw. After that there was no going back :) Successful install in the end, so it was all good. I kept the factory blinkers. Thank you Bill @ Cali Moto TV! Turns out there was no need to remove any of the seats.
I just commented that the other bolt that you striped does not even have to come out to remove it. So yes, just leave it in until the tail is removed from the bike, it's easier to remove anyway with it off the bike. 🏍 🏍
really helpful and looks so much better. I really like my V2 but hate that stick of a license bracket/turnsignal assembly. Can you share the ducati part number for the LED blinkers? Good vid.
It's good to see another FE other than NRC, although I really like their's for the V4/V2 body styling. That one looks great with the older 1299 and 1199. Good video man.
You don't have to remove that silver bolt to remove it, just pull down hard, it's a tight fit in that rubber grommet, but yeah that bolt does not have to come off to remove it.just remove the 2 allen bolts on the left and the right side and pull down hard.
You don’t need to take the torx silver screw out to remove it from the bike, just the two Allen screws, literally the easiest tail section in the world to remove, the silver torx screws are to join the two pieces of the factory tail tidy.
There are videos of removing the tail and none of them say to remove that silver bolt to remove the tail, they just show that you have to remove the 2 allen bolts on the right and the left.
Hi, wondering if u could help me. I couldn’t fit the Ducati performance indicators to that tail tidy. What did u use to mount the indicators? It doesn’t have the nut like the OEM indicators
Hey! Reading a lot about FE not passing the state inspections. How can one find out what’s allowed and what’s not in their state? Interested in info regarding Texas
It's a DOT not state thing. If your state has inspections and enforces DOT regulations, per DOT the license plate has to clear the rear wheel and the indicators have to be at least 9inch apart (or there about).
Nice vid dude 👏. Love that V2. Might even be my next bike. About the seat cover. I think they do make a white one. But a red tail might not look too bad either 🤷🏻♂️
Hi sorry could have learned, if you actually did an idiot video and showed where the boot that the triangle went into and showed all the bolts in place rather than just look at it from the licence plate. But gave a like, think that the nrcwould look better with this model
Thanks for the video,
I have the streetfighter v4s, it seems that V2 has more plenum space vis a vis V4. But I was able to tidy-up the wires on the exterior lol.
I stripped the torx bolt and thought I was screwed, but then realized it wasn't holding the fender to the bike so I disconnected the wire, removed the fender and just broke the two pieces apart.
Same thing happened here, so had to break the pieces. Mine was a black torx screw. After that there was no going back :)
Successful install in the end, so it was all good. I kept the factory blinkers. Thank you Bill @ Cali Moto TV!
Turns out there was no need to remove any of the seats.
I just commented that the other bolt that you striped does not even have to come out to remove it. So yes, just leave it in until the tail is removed from the bike, it's easier to remove anyway with it off the bike. 🏍 🏍
Damm Bill, that's 2 striped out bolts that did not even have to be removed until the tail section was removed.
Just giving you a hard time Bill. 🤪
really helpful and looks so much better. I really like my V2 but hate that stick of a license bracket/turnsignal assembly. Can you share the ducati part number for the LED blinkers? Good vid.
Ducati Performance don't have the part number on hand it's fairly easy to find.
Are you going to take passenger pegs off? That also helps the looks a lot in my opinion.
It's good to see another FE other than NRC, although I really like their's for the V4/V2 body styling. That one looks great with the older 1299 and 1199. Good video man.
You don't have to remove that silver bolt to remove it, just pull down hard, it's a tight fit in that rubber grommet, but yeah that bolt does not have to come off to remove it.just remove the 2 allen bolts on the left and the right side and pull down hard.
👍
You don’t need to take the torx silver screw out to remove it from the bike, just the two Allen screws, literally the easiest tail section in the world to remove, the silver torx screws are to join the two pieces of the factory tail tidy.
That is absolutely true,i don't know why he never said that you don't really have to take it out.
There are videos of removing the tail and none of them say to remove that silver bolt to remove the tail, they just show that you have to remove the 2 allen bolts on the right and the left.
Very helpful! Good job!
You need to put same on SF mate. This is so clean and sweet.
Hi, wondering if u could help me. I couldn’t fit the Ducati performance indicators to that tail tidy. What did u use to mount the indicators?
It doesn’t have the nut like the OEM indicators
Ducati sells two types. One threaded with a nut, one that is not. We used the threaded ones through the MD tail tidy.
@@CaliMotoTV What's the best part number to use? I can't seem to find the difference you describe here. Thank you!
Hello Calimoto 👋🏻 The tail looks much better now👍 A red tail will looks good also👌
what size rear did you have on this?
Hey! Reading a lot about FE not passing the state inspections. How can one find out what’s allowed and what’s not in their state? Interested in info regarding Texas
It's a DOT not state thing. If your state has inspections and enforces DOT regulations, per DOT the license plate has to clear the rear wheel and the indicators have to be at least 9inch apart (or there about).
Nice vid dude 👏. Love that V2. Might even be my next bike. About the seat cover. I think they do make a white one. But a red tail might not look too bad either 🤷🏻♂️
So much better! Where are the mirrors?
Do you still have the BMW R Nine T Racer?
Hi, wich angle have it? Here we need 30 degree.
No idea sorry. We took it off it doesn't fit with the new exhaust.
@@CaliMotoTV ok and i think the angle is not adjustable
yeah... main problem is that all european need those fucking 30 degree but plates are differents in each country...
They look SHARP!!
Hi I purchased the tail tidy from your website link, Can you also tell me or send me the link for LED indicators to fit on this ? Thanks
@@CaliMotoTV thanks very much. Should I buy the Thread connector or the Rubber connector ? Thanks again!
Top
Hi sorry could have learned, if you actually did an idiot video and showed where the boot that the triangle went into and showed all the bolts in place rather than just look at it from the licence plate. But gave a like, think that the nrcwould look better with this model
Is not necessary remove seat...before fender..