Looks good, along with the complete plug and play system for the turn signals. It should also have that cover as well as a license plate light to make it completely legal. Great video 👍🏽 I might do this as well.
To be fair for the large outlay for the light I'd expect it to just plug in! No harness messing. If they expect you to do that then surely it should be cheaper.
This integration looked better than what I saw in one your other videos (with a blinky one). I felt the separation was to small on that one and the signals just not clear enough which I feel could be a potential danger. This one looks pretty clear and distinctive enough to be safe though. (just mho of course).
Unfortunately not any good for the UK, we need a rear licence plate light for law enforcement plus yeah for that price it should have a blanking plate with it .
Futurismoto has the best looking and you can see why it's the price that it is, this one not so mutch.i think if you saw that one you would take that one off to and replace it.
Hey Bill, always informative videos, thank you. Just curious, is your area ok to tuck down the license plate like how you did with nrc kit? I was afraid whether I would get a ticket for not visible well enough from the back...
I can open with crome but it ask me to use may email, and ask me my password I don’t trust crome , I have all apple products. There is a better way? I cannot thank you enough. Thank you 🙏
Hi Bill, I have a question, did you notice a strong smell on the motorcycle SF after a ride, straightaway parked in the garage, in the beginning when it was with few miles? Thank you
Hey Bill, the dark tail light looks much better than the red original, but you paid too much. 350 Dollars omg, I saw it for 185 bucks. It fit`s also on Panigale V2 + Pani V4.
imho i wouldn't buy it because doesn't look gorgeous and i think it would be better if half tail light will shut off while turning light is on. it's not hard to do this kind of job, but u will need some electrical skill to do it right.
![Futurismoto Tail Tidy [Install] | Ducati StreetFighter V4 S](http://i.ytimg.com/vi/z4WhuK1nEHc/mqdefault.jpg)
![Futurismoto Tail Tidy [Install] | Ducati StreetFighter V4 S](/img/tr.png)
Thanks a lot bill ! We will add the plugs for sure ! The cover is not ready in carbon only ducati performance aluminum one ,
Hey V4evo, I don't see the tail light on the website. Do you know when it will be available? Thank you!
Is it just me or is the red weak in video? It looks almost like the indicators?
@@aussiesrt please see the website www.v4evo.com maybe you will get better idea,
Looks good, along with the complete plug and play system for the turn signals. It should also have that cover as well as a license plate light to make it completely legal. Great video 👍🏽 I might do this as well.
Great! I have 2 Panigales 1199R and a Superleggera 1199 wich have the same! Last week I bought a Streetfighter V4S and I'm goind to use it. Thahk U!
Bill you're a godsend. Love the channel
Also removing the side covers of the subframe , I didnt have to remove them on my Panigale 2020 v4 to get the light off .
To be fair for the large outlay for the light I'd expect it to just plug in! No harness messing. If they expect you to do that then surely it should be cheaper.
This integration looked better than what I saw in one your other videos (with a blinky one). I felt the separation was to small on that one and the signals just not clear enough which I feel could be a potential danger. This one looks pretty clear and distinctive enough to be safe though. (just mho of course).
Thanks for the video. Tried the install today but not getting the signals to work. Any troubleshooting ideas?
250 from shift tech carbon. Taiwan made light.
i purchase tail lights after watch your video :D hope i can manage to install it lol thank you for your video
Quality video as always. Great update too. Lovely smoke taillight cheers!
I was about to order the NRC tail tidy today, but lucky I didn't. It burns out??
have you tried the Futurismoto tail tidy ? Seems to be the nicest on the market at the moment.
Perfect timing!! Just got mine today and was looking for install instructions!! Thank you👊🏻
@@CaliMotoTV Indeed it did!! Looks great!
What colour scheme is the V4S in or is this wrap to make it look different, the red, grey and white and then white in the tail looks good.
It's a custom paint job
Thanks Bill, amazing video, as always
Ordered same tail for my SF
Greetings from Russia!
Nice install! Looks sweet!
Hey - what was that slick little non-iron soldering kit you used? Mind posting a link?
Hey there! Great Videos! Always helpful! How is this light now a year later? You have smoke? Is it bright enough on a sunny day? Any issues? Thanks!
We returned it after 6 months because it broke down. We're back to the stock tail.
Is turnlight better when its smoked?
I have to stop looking at your bike..... I want it so bad lol
Tail light looks great bud
Unfortunately not any good for the UK, we need a rear licence plate light for law enforcement plus yeah for that price it should have a blanking plate with it .
Nice video, do you have a link to the connectors?
Great video! This is tail light smoke?
Which license plate light did you end up getting? I think I've seen later pictures with one installed.
What was so poor about the NRC? LED lights burned out?
Futurismoto has the best looking and you can see why it's the price that it is, this one not so mutch.i think if you saw that one you would take that one off to and replace it.
👍
Is it sequential ?
Hey Bill, always informative videos, thank you. Just curious, is your area ok to tuck down the license plate like how you did with nrc kit? I was afraid whether I would get a ticket for not visible well enough from the back...
Technically not OK, practically 🤷♂️
That price is crazy, and i thought NRC was expensive 😳
Right?
What lift table you use for your bike ?
Looks great 👍
Damn... now I need to buy it!!!
Great job 👏
That is one sexy mod! I will get that too.
Is it possible to keep the plate in the tucked position?
We ended up bending the bracket to be on the tucked position.
@@CaliMotoTV no problems with it becoming weak?
@@CaliMotoTV and what did u do about lighting the plate?
Bending it worked for us without problems. No light.
@@meed9k you can use the existing plate light cable and a retrofit the oem light, or buy a plate light, that's what I done with mine
Good morning Bill, where can I find a torque manual of something, for the SF v4, I hope you can help me. Thank you ☺️
Thank you Bill, the only thing Is tell me that I need an access through safari of goggle.
Can you help me, please.
Thank
Grazie mille
I can open with crome but it ask me to use may email, and ask me my password I don’t trust crome , I have all apple products. There is a better way?
I cannot thank you enough.
Thank you 🙏
Hi Bill, I have a question, did you notice a strong smell on the motorcycle SF after a ride, straightaway parked in the garage, in the beginning when it was with few miles? Thank you
Hei Bill, do you know calimoto app?
Very nice vlog duds. New subscriber here JM SPARKS
Thanks for subscribing and saying hi! 🙌
Hey Bill, the dark tail light looks much better than the red original, but you paid too much. 350 Dollars omg, I saw it for 185 bucks. It fit`s also on Panigale V2 + Pani V4.
You got a link to it at that price pls ?
Not sure it’s the same quality...
@@advmatt1250 www.italo-shop.com is exactly the same tail light like bill bought. because only 1 factory manufacture it.
@@FRANCOTORO only 1 factory manufacture it. it is exactly the same tail light.
Freaking awesome!
This tail bring license plate light?
No.
Good video, ill pass on this design. Hopefully a better one comes out.
👌
Hope i can have this bike 🙏
Your streetfighter giveaway too? :D kidding
Can i have your old one since your not using it anymore? 😜
🤣🤣🤣
Should be fully plug and play if you're paying $350 for these.
They are now completely plug and play
imho i wouldn't buy it because doesn't look gorgeous and i think it would be better if half tail light will shut off while turning light is on. it's not hard to do this kind of job, but u will need some electrical skill to do it right.
Even if i wouldn't buy It you made a good video, i liked it.
Hope you make some other video on suspension settings (this for me would be blissfull👌😁)
What about a license plate light? Definitely needs a cover for that ugly hole!
No longer sold 😭😭😭😭😭😪😪😪
@@CaliMotoTV just went to install my nrc tail tidy on my stealth doesn't fit into the stock bracket 😪😪 I cried lol