Great product. Second one I bought and no issues at all. Love it for the function and value.Great features too. It could track fish better but all in all its great for the money.
Does it have the ability to make a chart of a new lake or river? Like the river channel, navigation through deep or shallow areas? Yeah, I'm new to all this stuff
Good video. My dad bought this unit several years ago, never could tell when it was showing a fish, Unfortunate that I have to ask this question, but what represents a fish on this screen?
Im still learning how to use my Lowrance 7. I have been trying to get the the grid line that runs across the middle of my GPS screen it runs up and down and side to side. can you help me thank you so much for this video .Greg Reilly
This is what I needed. I just got my Hook installed so now I'll take my ipad out to my boat in the garage and go through my settings....with your instruction. Your audio could be just a tad more clear. It's not bad, just a constructive comment. Thanks again! Subscribed :)
Ok, I am still reviewing your videos to get the best settings for my use. I fish Lake Erie most often....40-80 FOW. Walleye and perch. Which settings do you recommend? I have mine on medium chirp. Fast ping speed. Again, thanks so much!
Very simple question, if I drop a waypoint at the launch, and name it launch, can i use the first page, the compass to follow a line back to,the launch say in white out fog to get back? I never created a waypoint yet. Thanks
Bad Dog so if you drop a waypoint and then hit go to waypoint it will be as the bird flies. If you want to leave a trail to follow in white out conditions start a route. Then name it. Then follow the route and you will get the compass like you would when driving a vehicle
Thank you awesome video any more videos you have of this particular lowrance Hook 7 I'm interested in learning more I will say you showed on the left side how to set everything and I wish you would have show everything on the right hand side maybe you can do a video on the other side I'm just going to leave my settings like you leave them it will help me start to learn .
Hour ago I purchased this hook 7 unit. My first one with this high tech. Question, which mapping chip I get. I have two choices. Nautical insight pro or lake insight pro. ? For free
Great video man, I just install the Hook5 on my kayak, took it twice offshore and I'm trying to get familiar with it.. Would you use hight or medium chirp in between 100' and 350' offshore Any settings you can give me helps... tks
KAYAK FISHING ZONE I would first make sure that your setting for deep water, then I would probably run medium chirp unless the bait come to the surface
2 questions... 1:Do you recommend having sidescan on a kayak? Not sure if it is necessary since I fish only inshore (Texas lakes/rivers) 2: If you use the nocqua battery 10ah how long does it last with your hook 7? Thanks.
I switch from the Gen 1 Hook 7" to a Gen 1 9" Ti just to get side scan and it has helped to locate structure. The 10ah battery would last about 6-7 hours for me but when I went to the side scan unit I upgraded to a lawnmower battery to get more hours out of it. It will last 12-14 hours of continuous use.
So basically as soon as you turn the graph on and it finds your location you will start leaving a trail anywhere you go. If you want to set a known trail go into trails and set new and you’ll see it start to track
I have sonar set at auto. Inn 7 feet of water the sonar scale is 6 feet to 8 feet. In the lower left it shows “4x” which I assume is 4x zoom. How do I adjust this to show no zoom so the scale would be 0 feet and 8 feet.
Hi Matt I am having trouble with the Soner screen. Works great on simulator,clean as,but on soner, All dotted, Would it be the unit? Or the Transducer? Any Help would be Appreciated. Many Thanks Joseph
I would check the settings for type of fishing, example freshwater, saltwater or ice fishing. Then make sure you have the right sonar selected. Lastly play with the gain
I have heard stories that the map lags. Now that you have had the unit for awhile and I assume you have had it in the water! what is your review on the performance of this unit?
One more question for chart always reverts to LivPro16 always on start up. Choices are LivPro16, Navionics or Lowrance. I would like it to stay on Navionics for Chart.
do you know of a way to reduce and enlarge the screen while using screens split? I would like to set up 2D and down scan side by side but have the down scan screen larger the the 2d.
I appreciate the video. Great job explaining. I cannot seem to find the down scan option in the menu. I have worked on this and worked on it but I cannot find it. Any help you can offer I would appreciate greatly.
Old comment I know… but my issue is similar. My unit clearly says hook 7…. But I do NOT have all the options he does in the menu. I just spent about 3 different time sessions… each one till I was about to scream out of frustration….. calm down a while… go back and try again… get upset again. I simply cannot find anything whatsoever for ping, and chirp type.. frequency. I have VERY limited sonar options. Basically water depth -and overlay. Sooo frustrated
@@Remo22Mod sorry for your frustration. I’m guessing there must be a different transducer that will open up the downscan option. It’s been frustrating to me as well.
Mike Greenwell I fish rivers as well. I know putting the card in and leaving it turned on will not hurt. Maybe there will be some info about the river you are on. I do recognize that river bottoms are always changing.
I have the Hook 7, in split screen chart-sonar chart is about 4" wide fishfinder about 3" wide. Can you reverse so sonar is wider in split screen? Than chart. Thank you
So I would set the unit up for deep water. Go to the sonar page then hit menu and then go down to the fishing type, select deep water. I would run the 80khz sonar and the 288 frequency for the down imaging. The gain and surface clarity will be changed on a day to day depending on what the water is like.
Rick Remmler I run the GPS and the lights under the screen on one battery, deer feeder battery. The cockpit lights and green lights are on a separate battery that is the same as the other.
Thanks B3, Not sure what a deer feeder battery is, but I'll find out. I'm getting a Coosa HD (had a Coosa) and currently have a small battery I got at Cabelas (can't remember what size and have to run to teach Hunter Ed right now). I'll figure it out. Thanks for the reply! rr
If you are referring to the first time there is power to the unit, I set mine for: English, US Statue, degrees in F, Shallow water and start with everything in Auto and adjust the rest on the water.
Great video. I just purchased a Hook 9 and wonder if all the features of the Hook7 are the same, with the only difference being the screen size. Also I have an Elite 5 with an Navionics card which works fine in the Elite 5 but when placed in the Hook 9' the unit does work with it.
Paul Kinney the 9" just has a larger screen. The reason the chip is not working could be a software issue. New software in the 9" and old software on the card to work with the 5"
I am guessing you are adjusting your sensitivity, I keep turning mine down until everything starts to disappear. Then I will slowly turn back up until I spot fish.
Once you’re powered up and on the screen that you want to look at hit the power button once, you’ll see a menu pop-up look for edit overlay. You can turn everything on and off there and control the size and placement.
frank hobgood there will be a flag button you cannot and it will mark the boat location or use the arrow keys and scroll to a spot and hit enter. You will know you did it right when it asks you if you want to save it.
If you go to menu and select data overlay you will get little drop down menus that you can add info to the screen. Check the box with time. This works for water temp, depth, speed, volts and others.
WHEN YOU ARE ON THE SCREEN THAT YOU WOULD LIKE TO SEE THE WATER TEMP DISPLAYED, HIT THE POWER BUTTON ONCE. THEN YOU WILL SEE A POP UP THAT SAYS EDIT OVERLAY, SELECT THAT. ON THE RIGHT SIDE YOU WILL SEE ADD, THEN GO IN AND SELECT WATER TEMP.
scott tillman go to the settings under menu, all the way to the bottom there is a rest option. It will make you confirm a couple times. This will make your gps appear as it did brand new out of the box. All factory settings.
Great product. Second one I bought and no issues at all. Love it for the function and value.Great features too. It could track fish better but all in all its great for the money.
Does it have the ability to make a chart of a new lake or river?
Like the river channel, navigation through deep or shallow areas?
Yeah, I'm new to all this stuff
It does not have that ability what you’re referring to or asking about is a function of the Garmin units that have active Capt. capability
Good video. My dad bought this unit several years ago, never could tell when it was showing a fish, Unfortunate that I have to ask this question, but what represents a fish on this screen?
Im still learning how to use my Lowrance 7. I have been trying to get the the grid line that runs across the middle of my GPS screen it runs up and down and side to side. can you help me thank you so much for this video .Greg Reilly
This is what I needed. I just got my Hook installed so now I'll take my ipad out to my boat in the garage and go through my settings....with your instruction. Your audio could be just a tad more clear. It's not bad, just a constructive comment. Thanks again! Subscribed :)
Moondog9322 I have been working on lighting and sound. I have tried wired and wireless mics but the echo in the garage always wins.
Ok, I am still reviewing your videos to get the best settings for my use. I fish Lake Erie most often....40-80 FOW. Walleye and perch. Which settings do you recommend? I have mine on medium chirp. Fast ping speed. Again, thanks so much!
What sonar settings do you recommend for Lake Erie? 40-80 FOW. I sure appreciate your help and expertise!
Great video! 1 question for you. Can I use the Navionics chip that I currently have in my Humminbird unit in this Lowrance unit?
A lot of the chips by Navionics will work in both, it will not hurt anything to try
Thanks pal....Love my structure scan...
Very simple question, if I drop a waypoint at the launch, and name it launch, can i use the first page, the compass to follow a line back to,the launch say in white out fog to get back? I never created a waypoint yet. Thanks
Bad Dog so if you drop a waypoint and then hit go to waypoint it will be as the bird flies. If you want to leave a trail to follow in white out conditions start a route. Then name it. Then follow the route and you will get the compass like you would when driving a vehicle
@@BeardedBassBrawler thank you so much. I will try this today, practicing for emergency. Appreciate your reply.
Thank you awesome video any more videos you have of this particular lowrance Hook 7 I'm interested in learning more I will say you showed on the left side how to set everything and I wish you would have show everything on the right hand side maybe you can do a video on the other side I'm just going to leave my settings like you leave them it will help me start to learn .
Hour ago I purchased this hook 7 unit. My first one with this high tech. Question, which mapping chip I get. I have two choices. Nautical insight pro or lake insight pro. ? For free
Dwain Cearley are you fishing Saltwater or Freshwater and what is going to be you typical area fish i.e. Flats, bay, rivers or lakes
Bearded Bass Brawler hello , does it works for bass ? Does it support structure scan ?
Sorry about this notification turn off. Fresh water north Texas lakes.
Great video man, I just install the Hook5 on my kayak, took it twice offshore and I'm trying to get familiar with it..
Would you use hight or medium chirp in between 100' and 350' offshore
Any settings you can give me helps... tks
KAYAK FISHING ZONE I would first make sure that your setting for deep water, then I would probably run medium chirp unless the bait come to the surface
KAYAK FISHING ZONE q
2 questions...
1:Do you recommend having sidescan on a kayak? Not sure if it is necessary since I fish only inshore (Texas lakes/rivers)
2: If you use the nocqua battery 10ah how long does it last with your hook 7?
Thanks.
I switch from the Gen 1 Hook 7" to a Gen 1 9" Ti just to get side scan and it has helped to locate structure. The 10ah battery would last about 6-7 hours for me but when I went to the side scan unit I upgraded to a lawnmower battery to get more hours out of it. It will last 12-14 hours of continuous use.
I wish you would have gone over the trace or trail setting which shows the red or orange line so one could back track where one started
So basically as soon as you turn the graph on and it finds your location you will start leaving a trail anywhere you go. If you want to set a known trail go into trails and set new and you’ll see it start to track
I have sonar set at auto. Inn 7 feet of water the sonar scale is 6 feet to 8 feet. In the lower left it shows “4x” which I assume is 4x zoom. How do I adjust this to show no zoom so the scale would be 0 feet and 8 feet.
While on Sonar only screen just hit the minus button
@@BeardedBassBrawler thanks
Hi Matt I am having trouble with the Soner screen. Works great on simulator,clean as,but on soner, All dotted, Would it be the unit? Or the Transducer? Any Help would be Appreciated. Many Thanks Joseph
I would check the settings for type of fishing, example freshwater, saltwater or ice fishing. Then make sure you have the right sonar selected. Lastly play with the gain
Can you put a software upgrade and GPS Rollover patch on the same micro sd card to update at the same time?
You would download the software update on a blank card put that in, do the update and then remove and go back to a map card
Is this set up for fresh water? I just moved and will be fishing lakes now. No more brackish/saltwater for me
I have heard stories that the map lags. Now that you have had the unit for awhile and I assume you have had it in the water! what is your review on the performance of this unit?
One more question for chart always reverts to LivPro16 always on start up. Choices are LivPro16, Navionics or Lowrance. I would like it to stay on Navionics for Chart.
If you go to default setting to return to factory settings will the set up wizard come up when unit is restarted ?
Thank you for doing this. Well done.
do you know of a way to reduce and enlarge the screen while using screens split? I would like to set up 2D and down scan side by side but have the down scan screen larger the the 2d.
Phil once you are on the 50/50 screen you like hit the power button and you will get a pop up that has the spilt adjustments
@@BeardedBassBrawler , thank you. I've been hitting buttons trying to figure it out my last few times out.
Which is best for crappie??? I’m learning mines
I appreciate the video. Great job explaining. I cannot seem to find the down scan option in the menu. I have worked on this and worked on it but I cannot find it. Any help you can offer I would appreciate greatly.
Old comment I know… but my issue is similar. My unit clearly says hook 7…. But I do NOT have all the options he does in the menu. I just spent about 3 different time sessions… each one till I was about to scream out of frustration….. calm down a while… go back and try again… get upset again. I simply cannot find anything whatsoever for ping, and chirp type.. frequency. I have VERY limited sonar options. Basically water depth -and overlay. Sooo frustrated
@@Remo22Mod sorry for your frustration. I’m guessing there must be a different transducer that will open up the downscan option. It’s been frustrating to me as well.
I have hook 7 on the way, it comes with a Nautica card. will that be of any use to me? I mainly fish Rivers here.
Mike Greenwell I fish rivers as well. I know putting the card in and leaving it turned on will not hurt. Maybe there will be some info about the river you are on. I do recognize that river bottoms are always changing.
Bearded Bass Brawler how do I even turn it on? These electronics are new to me. haha
Mike Greenwell. Turn the unit on or the chip function? Do you have Facebook?
Bearded Bass Brawler I do have Facebook "Mike Greenwell"
Mike Greenwell. Can you heard over to Facebook and like my page so I can find you. I will send you a quick video through messager.
Great Video. how do you get your contour lines shaded different colors
Colin Hulke you just set the depths that you want it set at under the settings in the chart menu.
Bearded Bass Brawler okay, and the hook 7 has these settings cause I can't find them. thanks in advance
I have the Hook 7, in split screen chart-sonar chart is about 4" wide fishfinder about 3" wide. Can you reverse so sonar is wider in split screen? Than chart. Thank you
I read from another person about pushing power button to adjust screen size does not work with mine how to split screen
Awesome video. Thanks
Hey Mate , I fish in about 40m of water and need to set up my lowrance sounder could you help me out ?
Fishaholic luke sure what is your question?
Bearded Bass Brawler just wanna know how to set it up to see fish etc snapper on the bottom better im from Aus btw
So I would set the unit up for deep water. Go to the sonar page then hit menu and then go down to the fishing type, select deep water. I would run the 80khz sonar and the 288 frequency for the down imaging. The gain and surface clarity will be changed on a day to day depending on what the water is like.
Bearded Bass Brawler are you on Facebook mate be better to talk on that :)
Link is in the comments
Excellent video
so how do I get the map up
B3, I just saw your green LED video. do you use the same battery for both lights and sonar? If so what is the size of the battery? Thanks,
Rick Remmler I run the GPS and the lights under the screen on one battery, deer feeder battery. The cockpit lights and green lights are on a separate battery that is the same as the other.
Thanks B3, Not sure what a deer feeder battery is, but I'll find out. I'm getting a Coosa HD (had a Coosa) and currently have a small battery I got at Cabelas (can't remember what size and have to run to teach Hunter Ed right now). I'll figure it out. Thanks for the reply! rr
Should I have downscan overlay turned on or off?
AR FISHING I like to turn it on after I got in an area I like and make my first pass through an area like an edge.
How do you get your unit out of demo mode?
Under settings, then system and then scroll down till you find it
How do I get out of DEMO mode, Im not in the water yet but I can't seem to get live mode ... Card Pro 16 in slot
Thanks
Scot
do u have a showig of how to setup factory gps
If you are referring to the first time there is power to the unit, I set mine for: English, US Statue, degrees in F, Shallow water and start with everything in Auto and adjust the rest on the water.
Great video. I just purchased a Hook 9 and wonder if all the features of the Hook7 are the same, with the only difference being
the screen size. Also I have an Elite 5 with an Navionics card which works fine in the Elite 5 but when placed in the Hook 9' the unit does work with it.
Paul Kinney the 9" just has a larger screen. The reason the chip is not working could be a software issue. New software in the 9" and old software on the card to work with the 5"
thanks for you quick reply. Helps a lot! Paul
Can tide charts be added to lowrance hook 7 ?
Matt can you tell me how to get rid of 2X zoom on my screen?
Bad Dog make sure there is a orange box around the sonar and hit the minus button it will zoom you out.
Hey, thanks so much. I'll check that out
Cam I hook this fish finder to a tv?
I still can't see my screen in the day nor find brightness. It's on my HDS 7, but not the Hook?
Steve Liles just push the power button a couple times and it will cycle through the different levels of brightness
@@BeardedBassBrawler ----- thank you!
is the sensitivity on when u see the x or is it off
richard cline “x” is selected
I have a hook 7 great info on vid but were do I get the hood for it
I made the hood but there are companies that make them.
What company makes them.
Patricia Mills not sure I made mine.
Patricia Mills berlypro makes the hoods
Berleypro sorry autocorrect
I'm contemplating buying one of these but I've heard they loose bottom and have lag in the map a lot. Is this true?
I never have had a problem loosing bottom but the maps do lag when zooming in and out. I never use the maps enough for it to bother me.
Bearded Bass Brawler thanks
does this fish finder show the speed of travel ?
Yes. That information can be set as overlay data, this way you can see it on all of your screens.
When I put my sensor on auto it clutters the screen..I fish in the delta..brackish water what should I do
I am guessing you are adjusting your sensitivity, I keep turning mine down until everything starts to disappear. Then I will slowly turn back up until I spot fish.
I have the same unit and I hit a button and now it doesn't show my water temp on the screen and I don't no how to get it back
Once you’re powered up and on the screen that you want to look at hit the power button once, you’ll see a menu pop-up look for edit overlay. You can turn everything on and off there and control the size and placement.
@@BeardedBassBrawler ok thank you
how do I set waypoint on hook 7 tripleshot?
frank hobgood there will be a flag button you cannot and it will mark the boat location or use the arrow keys and scroll to a spot and hit enter. You will know you did it right when it asks you if you want to save it.
how to you show time on the screen?
If you go to menu and select data overlay you will get little drop down menus that you can add info to the screen. Check the box with time. This works for water temp, depth, speed, volts and others.
thanks i will try that
How do i get the numbers bigger.. Is small and normal sizes my only option? Thanks
does the hook 7 display depth when on plane
in my boat going 40 it does
How do you get water temp to display
WHEN YOU ARE ON THE SCREEN THAT YOU WOULD LIKE TO SEE THE WATER TEMP DISPLAYED, HIT THE POWER BUTTON ONCE. THEN YOU WILL SEE A POP UP THAT SAYS EDIT OVERLAY, SELECT THAT. ON THE RIGHT SIDE YOU WILL SEE ADD, THEN GO IN AND SELECT WATER TEMP.
I can't get it to use FATHOMS. I change it to US NAUTICAL from US STANDARD and nothing changes. It will change to metric.
fishboat you have to change feet to fathoms on your measurements. You will find it under the option of US nautical and US Standard
How do you do a reset on the hook7?
scott tillman go to the settings under menu, all the way to the bottom there is a rest option. It will make you confirm a couple times. This will make your gps appear as it did brand new out of the box. All factory settings.
Thanx good vid.
gonna give this a try then i need to learn how to bring up lakes and rivers i fish on
How find fish with a beep sound
What is the previous video
Brian Rossiter ruclips.net/video/vDZxT09wEOA/видео.html
can u give me seeting sonar n down imeging,tq
ruclips.net/video/vDZxT09wEOA/видео.html
Not a bass fisherman love big cat. How can you tell different between other species. Old hummingbird it was a guessing game.
Hard to hear voice echoes
Why can’t hook 7 Lowrance show arches instead of fish symbols?
It more options and then under fish I’d turn off symbols
thanks very helpful. can't get clutter top of my screen. bottom is showing top of my screen. your picture was clear on top . HELP
my hook 7
Hey why doesn’t sonar option show up on my screen
Lazaro Morera not sure what you are asking, if you are looking for overlay info hit power once on the screen you want them edit overlay
Bearded Bass Brawler hey thanks man it work
water depth not accurate
How far off is it?