I'm happy for you Speedy. You put a lot of work into all your projects and I'm glad the car is performing to your expectations. Great number for a first visit to the track although you likely know more about how to drive it than 99% of the owners. Low 9's are a great realistic target. Good Luck!
Hm.🤔 I’ve “recovered” from my SRT addiction & retreated into the woods of Kentucky with a high flow tracked skid steer & guns.😁 Never thought I’d look back at Dodge. Thanks for a great video.😉
Great content! I raced at Beach Bend in 2003 ( even though Im from the Philadelphia, PA area) when visiting freinds in the Nashville . Nice track. Good luck with your 170 progress, I'll be sure to tune in.
Looks like a lot of great fun, and it was great watching you enjoy your pulls. What an amazing car! Also glad to see you took the time to actually read the Demon 170 manual and, most importantly, follow the correct break-in procedure. Putting the manual up on the screen showng the 1,500 break-in millage was also helpful because others have incorrectly told viewers the break-in millage is only 500 miles. And, what do you know, after you correctly broke-in your engine it ran great. Keep it all the fun, and thanks for sharing! The Demon 170 haters on RUclips are going to be terribly upset your engine did not fail. LOL. So far not a single documented engine failure where the Demon 170 engine was broken in CORRECTLY folks. Should be no suprise.
New p.b. is awesome. Hopefully Mrs Speedy is happier now too, I'm guessing that brought your moods up some from the reactions going down the track, and the time slip reactions...lol.😂 Almost sounded a little like Doc Brown when he saw the flux capacitor actually worked....lol😂😂
That is just Plain Goodness🙌👏. The Demon 170 is just a Monster & hard to believe it’s street legal emission & all. It’s like a Jr Street Legal Drag Pac. Love the technology & the drivers ability to adjust the performance. I follow Ron Silva with his 170 & boy ol boy he sure knows his car. Very good 1st time results & looking forward to them low 60ft times. 👍😉
Glad to see you hitting the track with that beast of a car! That thing is moving. I just have a measly Redeye ha-ha. Curious what the g force meter and 0-60 timers look like.
Nice Run, I have a couple of friends that have those cars and traction is the challenge. Glad to see you using the torque limiting feature. I had one of the Demon 170 owners telling another not to waist their time with the launch control. I had to explain to him that this is different from his 2018 Demon. I guess people still don't really read the manuals? My one friend has managed to get his down to a 9.17 with the front wheels about a foot in the air here in Bradenton FL. I am sure when you have had some practice with the launch you will get the times much faster.
For me it will be all down to surface prep and how much power I can put down. The launch features (trans brake specifically) have impressed me thus far.
You probably go through tires fast when you have do a burn out to get the tires warmed up every time you have a pass. I don’t know anything about drag racing, but damn!
The next thing I would do is change tires. Why not try two or three different kinds and get the car to hook hard. If it was me, I would go to a 15" wheel and tire so I could leave maxed out and hook.
They are tye same 5 Demon 170 haters on RUclips the have nothing better to do than trash this amazing drag car. You guys just keep hating and the rest of us will keep enjoying this amazing car along with its AMAZING reliablity and quality!
Brought a smile to my face hearing you that excited
I'm happy for you Speedy. You put a lot of work into all your projects and I'm glad the car is performing to your expectations. Great number for a first visit to the track although you likely know more about how to drive it than 99% of the owners. Low 9's are a great realistic target. Good Luck!
Thank you!
That's insane ICE power rear wheel drive car. It's absolutely glorious!
Hm.🤔 I’ve “recovered” from my SRT addiction & retreated into the woods of Kentucky with a high flow tracked skid steer & guns.😁 Never thought I’d look back at Dodge. Thanks for a great video.😉
Awesome outcome it’s great and rewarding to see it perform Iam sure you’ll do well with it congrats 👍👍
Thanks 👍
Great content! I raced at Beach Bend in 2003 ( even though Im from the Philadelphia, PA area) when visiting freinds in the Nashville . Nice track. Good luck with your 170 progress, I'll be sure to tune in.
Looks like a lot of great fun, and it was great watching you enjoy your pulls. What an amazing car! Also glad to see you took the time to actually read the Demon 170 manual and, most importantly, follow the correct break-in procedure. Putting the manual up on the screen showng the 1,500 break-in millage was also helpful because others have incorrectly told viewers the break-in millage is only 500 miles. And, what do you know, after you correctly broke-in your engine it ran great. Keep it all the fun, and thanks for sharing! The Demon 170 haters on RUclips are going to be terribly upset your engine did not fail. LOL. So far not a single documented engine failure where the Demon 170 engine was broken in CORRECTLY folks. Should be no suprise.
Now the fun begins
New p.b. is awesome. Hopefully Mrs Speedy is happier now too, I'm guessing that brought your moods up some from the reactions going down the track, and the time slip reactions...lol.😂 Almost sounded a little like Doc Brown when he saw the flux capacitor actually worked....lol😂😂
Awesome video. You had me giggling too. Looked like a lot of fun.
The tools this car has takes a lot of the stress off the driver for sure. Makes it easier and a LOT of fun.
Nice to see you racing again! These Demon 170’s are just awesome 🔥
Awesome, having fun, that is what it is all about
Wish I could have been there but that will need to wait, congrats on your new personal best it will get a lot better!!
Love the content....glad to see your backand love the car.
Absolutely incredible what these cars can do 👏
Great job Speedy, what an awesome ride!
love this! i am in Evansville Indiana, love to meet up with ya at beech bend next time and do some shakedowns on my redeye challenger.
That is just Plain Goodness🙌👏. The Demon 170 is just a Monster & hard to believe it’s street legal emission & all. It’s like a Jr Street Legal Drag Pac. Love the technology & the drivers ability to adjust the performance. I follow Ron Silva with his 170 & boy ol boy he sure knows his car. Very good 1st time results & looking forward to them low 60ft times. 👍😉
Great maiden voyage runs, congrats!
Glad to see you back at the track, looking forward to more!! Any progress with picking a name??
Glad to see you hitting the track with that beast of a car! That thing is moving. I just have a measly Redeye ha-ha.
Curious what the g force meter and 0-60 timers look like.
It pulls really hard. Surprised me actually.
Nice Run, I have a couple of friends that have those cars and traction is the challenge. Glad to see you using the torque limiting feature. I had one of the Demon 170 owners telling another not to waist their time with the launch control. I had to explain to him that this is different from his 2018 Demon. I guess people still don't really read the manuals? My one friend has managed to get his down to a 9.17 with the front wheels about a foot in the air here in Bradenton FL. I am sure when you have had some practice with the launch you will get the times much faster.
For me it will be all down to surface prep and how much power I can put down. The launch features (trans brake specifically) have impressed me thus far.
Good stuff Speedy. I recognized the black car on the trailer ahead of you :) -- toofart
You probably go through tires fast when you have do a burn out to get the tires warmed up every time you have a pass. I don’t know anything about drag racing, but damn!
Congrats!!!! Have fun with it. Was that black challenger from ost dyno?
The next thing I would do is change tires. Why not try two or three different kinds and get the car to hook hard. If it was me, I would go to a 15" wheel and tire so I could leave maxed out and hook.
Impressive machine!
Congratulations 🎊
Bring that car to Michigan this fall for good DA.
Great content speedy🙂👍
Do you run the chiller while you race?
Awesome, Good for you!
Thanks!
Nice!!
How different is the seat of the pants feel compared to the Hellcat
Quite a bit different.
18psi of air bro and beadlocks
What fuel was that in the purple cans? is it way better than E-85 on the pump?
Renegade E85.
@@SpeedysGarage Thank you, Do you like it better then E-85 on pump ?
Very nice first run.. beautiful car… 👍🏻..😎
I claim at least partial responsibility...
; )
LOL
Just need to work on that reaction time.
I mean 9.7 even 9.5 is still FAR from being 8.9 claimed that I don’t believe will ever run that 100% stock
For the 60' I was happy first time out. Several people already hit the 8.90s in their 170s. One guy has even beaten it with a 1.20 60' to boot.
I thought they ran 8's @151mph??
Several have. Takes the right track prep though.
Run 18lbs take front sway bar off and hang on
Who are the jackwaggons that down-voted???
They are tye same 5 Demon 170 haters on RUclips the have nothing better to do than trash this amazing drag car. You guys just keep hating and the rest of us will keep enjoying this amazing car along with its AMAZING reliablity and quality!
It's the same that follow me around, jelly I guess lol.
That's a good time in your Redeye. Just realize not everyone paid $150K.
I didn't pay $150K. Am I lying? LOL Tread carefully with all the jelly comments.
@@SpeedysGarage biting my tongue
; )