hat super funktioniert, nachdem ich fast einen Tag auf Fehlersuche war. Entscheidend war dabei , dass das Papier über die Klappe für die Direktzufuhr problemlos eingezogen wurde, nicht aber aus dem Papierfach. Trotz gründlicher Reinigung und Anrauhung der Transportrollen blieb es auf halber Strecke hängen. Vorausgegangen war eine Überfüllung des Papierfaches mit unsanftem Einschub Hat Spaß gemacht, dann endlich doch schnelle Reparatur. Danke aus Germany!!
Jo, nur leider hat er die Feder komplett ausgehangen, die sollte man schon wieder richtig reinsetzen, so dass sie eben jenen weißen Hebel spannt, sie wird normalerweise über den Dorn an der Papierkassette in die richtige (wie hier im Video gezeigt) Position gedrückt 👍
This fix worked on my Brother MFC-7365DN, and I suspect it will work on many other similar models. I do not normally write any RUclips comments. This video just saved me from spending $400 on a newer color version of this model all in one printer I was considering purchasing if I couldn't get this one working today. Whenever I needed to print something from home I had been carefully feeding the paper one at a time vertically with the printer hanging off my desk for a couple years (very frustrating). Thank you very much Mr. Bilal, you've earned a subscriber.
Someone asked me to fix this exact same printer and it had exactly the same problem shown in the video. I followed your instructions and now the printer works! Thanks a lot for making this video!
You saved my printer and my day! I had trouble opening the printer following along with your instructions but all is well! I love my printer and can't live without it and you're the reason it's still working! Thank you so very much!
Fantastic! I followed the instructions exactly and it worked like a charm. I'm printing again and I didn't need to take the machine for repair. Thank you for this video and instructions. Much appreciated!
Life saver!! I was getting ready to buy a new Brother, but I still had a lot of supplies for my MFC-7360N and I didn't want to give up. Thank you so much! It's back again! Best wishes.
THANK YOU! Only tricky part was getting the cover off. After that the fix was quick and easy. Instructions were easy to understand and my printer works great now!
A million thanks! I could not believe it when I saw the paper coming out!! It happened a minute ago, I was able to repair my copy machine after watching your video and following each step of the operation! It was not very hard, I was just nervous about the spring to put back on place...So thankful to you for your precious help (and also proud of me to have understood!), I am usually not familiar with putting my fingers in springs and gears and screws...Anyways, you made my day!
Thank you, sir! It worked. In my case that plastic hook got misplaced. Prying plastic cover took a bit of time, easiest way to start from screw then top. Very good video A+
Thanks for this video! I had ordered a new plastic part and then ran across this video. Fixed it before the part arrived! Now I have a spare part!! Thanks!
Fantastic, did what you showed, and printer is now working again, hooray! Wasn't sure the problem would be the same as the one you are fixing. Biggest issue I had was removing the side cover, was a bit stiffer than expected. Need to have flatbed scanner up as well.
Thank you very much for your help! It did work, even though my printer is a slightly different model (DCP-7065DN). The most difficult part was figuring out how to open the side panel, but after that, it was a piece of cake. Plus, we could fix the position of the little plastic thing without taking off the "roll". Again, thank you so much! :)
Yes, a terrific result. Many thanks. The spring seems really quite loose when replaced, so I wasn't sure I'd got it right. But the video was just excellent, so I now have a working printer again.
Thank You Thank You Thank You. This video helped me out tremendously. I was just about to order a new printer because i could not figure it out, and then your vid popped up.
Thanks!!! Great video, really helpful. For me the problem was the little white plastic that you have moved in your video next to the spring, that caused no paper error. There was a small broken piece at the end. I have ordered the part, with your instruction I was able to change it!! Thanks a lot for sharing this information.
Worked for me thanks. There is no need to remove the steppermotor or spring, just pull back the spring a bit and work the plastic free like shown. BTW: It makes me wonder, why is that spring there, it doesn't seem to have a function besides getting the paper pickup disturbed.
Forgot to say: I used these instructions for a DCP-7055. Everything was as in the video. Most hard part was taking the plastic cover off. Lots of plastic tabs keeping it in place.
thank you so much for this. I am not adept at any fix it project and I was able to fix my printer with only a little stress and few tears, thanks to your excellent video.
Subscribe To My Channel www.youtube.com/@bilalkhalid/?sub_confirmation=1
hat super funktioniert, nachdem ich fast einen Tag auf Fehlersuche war.
Entscheidend war dabei , dass das Papier über die Klappe für die Direktzufuhr problemlos eingezogen wurde, nicht aber aus dem Papierfach. Trotz gründlicher Reinigung und Anrauhung der Transportrollen blieb es auf halber Strecke hängen. Vorausgegangen war eine Überfüllung des Papierfaches mit unsanftem Einschub
Hat Spaß gemacht, dann endlich doch schnelle Reparatur. Danke aus Germany!!
Jo, nur leider hat er die Feder komplett ausgehangen, die sollte man schon wieder richtig reinsetzen, so dass sie eben jenen weißen Hebel spannt, sie wird normalerweise über den Dorn an der Papierkassette in die richtige (wie hier im Video gezeigt) Position gedrückt 👍
This fix worked on my Brother MFC-7365DN, and I suspect it will work on many other similar models. I do not normally write any RUclips comments. This video just saved me from spending $400 on a newer color version of this model all in one printer I was considering purchasing if I couldn't get this one working today. Whenever I needed to print something from home I had been carefully feeding the paper one at a time vertically with the printer hanging off my desk for a couple years (very frustrating). Thank you very much Mr. Bilal, you've earned a subscriber.
Happy to help
Someone asked me to fix this exact same printer and it had exactly the same problem shown in the video. I followed your instructions and now the printer works! Thanks a lot for making this video!
You saved my printer and my day! I had trouble opening the printer following along with your instructions but all is well! I love my printer and can't live without it and you're the reason it's still working! Thank you so very much!
Glad I could help!
BIG THANK YOU MAN, MUCH APRECIATED wish you all the best from my heart , it was really helpful
Thank you. I am glad that there are people like you uploading videos like this on youtube. It worked perfectly!!!!!!
Fantastic! I followed the instructions exactly and it worked like a charm. I'm printing again and I didn't need to take the machine for repair. Thank you for this video and instructions. Much appreciated!
Life saver!! I was getting ready to buy a new Brother, but I still had a lot of supplies for my MFC-7360N and I didn't want to give up. Thank you so much! It's back again! Best wishes.
Glad I could help
THANK YOU! Only tricky part was getting the cover off. After that the fix was quick and easy. Instructions were easy to understand and my printer works great now!
This was AWESOME. My son and I fixed our printer in less than 5 minutes (DCP-7065DN). Thank you so much.
Auf meinem Gerät ist genau das gleiche Problem aufgetreten. Ich habe mir Ihr RUclips angesehen und das Problem wurde gelöst.❤
Glad it helped
Thank you so much for the informative video. Corrected the problem in 5 min. THX!!!!
Glad it worked, You are most welcome
THANK YOU VERY MUCH! INSTRUCTIONS WORKING WELL. LET'S PRINT, AGAIN :)
Always welcome sir
A million thanks! I could not believe it when I saw the paper coming out!! It happened a minute ago, I was able to repair my copy machine after watching your video and following each step of the operation! It was not very hard, I was just nervous about the spring to put back on place...So thankful to you for your precious help (and also proud of me to have understood!), I am usually not familiar with putting my fingers in springs and gears and screws...Anyways, you made my day!
Thanks!
Welcome!
Worked perfectly, especially helpful at 2:45 where you show how to position it. Thanks.
Saved me during the pandemic. Run a small business and printer stopped feeding paper ! This trick did it. Thx sir !
it wooooooooorked!!! omg. i can't believe i was able to do that. dude. you're amazing!
Very thorough instructions. I had a little trouble removing the panel but everything else worked perfectly. Thank you for saving me a repair bill.
Welcome sir
Worked like a pro! The hardest part was getting the side cover off lol
Worked like a charm on a Brother DCP-7055W and was easy to do. Thanks a lot.
Thank you, sir! It worked. In my case that plastic hook got misplaced. Prying plastic cover took a bit of time, easiest way to start from screw then top. Very good video A+
Great to hear you got it fixed!
Baijan... You are a rock star!!!❤❤❤🎉 It works!!!!!😊 Use butter knifes to open the side cover using them as levers.
Glad I could help
I had two MFC-7360N printers with this exact problem. Your video saved the day. Both printers now up and running. Thank you very much.
Glad I could help!
Thks u my friend from Tahiti 👍🤟🤙
Welcome 👍
IT WORKED!!!!! So easy and simple! :) Thank you Bilal!
You're welcome!
Very helpful video! This was exactly what was needed to fix the MFC-7360. Thank you sir!
Glad it helped
Mr. Bilal, you made my day. Problem solved! Thank you very much for sharing! ❤
Merci beaucoup. C'était très instructif et vidéo m'a aidé de corriger ce problème pour MFC-7860DW.
Wonderful. Was so easy to fix and it is working perfect again. Thank you.
Thanks for this video! I had ordered a new plastic part and then ran across this video. Fixed it before the part arrived! Now I have a spare part!! Thanks!
Thank you so much Sir. I really appreciate!!! I was able to repair my Printer with your help. Thank you very much!
Fantastic, did what you showed, and printer is now working again, hooray! Wasn't sure the problem would be the same as the one you are fixing. Biggest issue I had was removing the side cover, was a bit stiffer than expected. Need to have flatbed scanner up as well.
Thank you very much for your help! It did work, even though my printer is a slightly different model (DCP-7065DN). The most difficult part was figuring out how to open the side panel, but after that, it was a piece of cake. Plus, we could fix the position of the little plastic thing without taking off the "roll". Again, thank you so much! :)
Surprisingly worked for me too. Thanks for the advice Bilal 👌🏼
Happy to help
Great instructions allowed me to fix my printer. Thanks so much!
Great instructions - fixed and working perfectly now!
Your Video was of great help, fantastic! Everything works again
Glad it worked
keep continuing bro
awesome work
Well explained. Solved. Thanks.
thank you, very helpful!
Many thanks for the video, you saved my old Brother printer!
Yes, a terrific result. Many thanks. The spring seems really quite loose when replaced, so I wasn't sure I'd got it right. But the video was just excellent, so I now have a working printer again.
Great job!
Brilliant! Solved the problem on my MFC-7460DN great instructions Thanks!
Thank You Thank You Thank You. This video helped me out tremendously. I was just about to order a new printer because i could not figure it out, and then your vid popped up.
many thanks for this manual. It saved me more than 300 €.😊 Amazing!
thank you dude! fixed my problem as well!
Saved my mother’s printer, thanks!
It works! it was all the position of that plastic piece and that spring. Easy fix - thank you!
Thanks so much Brother!!!
You are the man!! Fixed it!
Glad it fixed
24th August 24 excellent thanks simple repair ,and good tuition many thanks
You are most welcome
Thanks 😍😍 worked on the old DCP-7550 I got from eBay for my dad!
You r the man 😊👌. Thanx
You are welcome
Thank you! Saved me $250
Glad I could help!
Thank you so much!! I was able to fix the paper feed problem. You are the best!!!
Glad I could help!
Vielen Dank..... funktioniert bei DCP 7055 !! Bin begeistert
Thanks very much for your excellent explanation. I could fix the paper error now🙏
Thanks Bilal. Like your work mate. It fixed the problem.
Glad it helped
Vielen Dank! Läuft wieder😁
Thanks Danke - Großes Problem kleine Lösung - mit Pausetaste Livetime repariert - in 5 Minuten - Klasse Thankyou from Germany 2023
Thank you so much. Your video was really helpful. My printer is all good now.
Glad it worked
Thanks!!! Great video, really helpful. For me the problem was the little white plastic that you have moved in your video next to the spring, that caused no paper error. There was a small broken piece at the end. I have ordered the part, with your instruction I was able to change it!! Thanks a lot for sharing this information.
Glad it helped!
Some helpful! Thank you so much! You saved by day. 🙂
Glad it helped!
Thank you for helping people sorting out this issue.
It worked for me as well! Was about to purchase a new one.... Thanks so much! Greetings from Holland!
You are welcome!
Thank you very much from Germany. I repaired a Brother HL-2250DN.
THANK YOU BROTHER FOR MAKING THIS VIDEO YOU MAKE MY DAY HAPPY 😊
Glad it helped!
Thank you, so easy to do once you are shown how. Saved me a lot of money!!!
Glad I could help!
It worked.... really. You saved a lot of money. Thanks very much!!
Fixed ! great help thanks so much
MFC 7600-DN
Glad it helped!
Thank you this exactly did the trick for me amazing 👍👍👍
Fantastic!
Thank you so much you have just save me hundreds of dollars and having to buy a new printer!
Glad I could help!
Worked for me thanks. There is no need to remove the steppermotor or spring, just pull back the spring a bit and work the plastic free like shown. BTW: It makes me wonder, why is that spring there, it doesn't seem to have a function besides getting the paper pickup disturbed.
Yes sir I was thinking the same thing.
Thankyou very much sir it is 100% working my machine is ready to use
Worked perfectly. Thanks a lot for sharing!
Forgot to say: I used these instructions for a DCP-7055. Everything was as in the video. Most hard part was taking the plastic cover off. Lots of plastic tabs keeping it in place.
Your guide is great. It works well now.
Glad to hear that
Thank you. You video is excellent. I already subscribed.
thank you so much for this. I am not adept at any fix it project and I was able to fix my printer with only a little stress and few tears, thanks to your excellent video.
Awesome video. You saved the day! Thank you so much!
Glad it helped!
Awesome thank you. You just saved a printer from going in the trash.
Glad I could help
Thank you so much! You have helped me save about $200 to replace my printer +++
oh thank you oh thank you!!!
Thank you for this video. This absolutely fixed my issue.
Glad it helped
Thanks a lot for this video! My printer is working flawlessly again! :)
Glad it helped!
it worked for me perfectly, thank you very much
Thanks! You saved my Printer
thanks, my friend. You save me!
You saved the day! Thank you!
Thank you for sharing.. worked for me and done in 10 minutes!
Brilliant video, thanks!
Thanks so much for this Video. You just save me from spending thousands of money to fix this. Thanks
Glad to help
Thank you so much. Definitely you're lifesaver
Glad to hear that!
most helpful ❤
Thank You so much
Really it’s work 🙏
Glad to hear
Brilliant! Hardest part was removing the cover.
Yeah to some extent
Worked for me with an MFC-7360N as well. Thank you for sharing!
VERY hapeful, no one helped so much as easy
Glad it helped!
Tnx bro ...works for me