⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: ruclips.net/p/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj
Hello Michele, thank you very much for your great tutorials. I have few suggestions for future videos: - Turn off traction control (ESP) in cars without RS button on central console, - Turn on traffic sign recognition system in cars with front facing camera (rain sensor) - Turn on automatic high/low beam
Hey Mate, Alfred here from South Africa and I want to say thank you for your geek experience We Team Renault appreciate you man! Though can you activate the RS Monitor on the Megane IV GT 1.8T (2018)??
Three things I wish to have and I hope you can help 1.remote start engine without car shutting down when I open the door. 2.panic button in case I wanna find my car somewhere in a packed parking lot 3.any way to use the browser on developer mode to install apps!
Hi, the remote start engine is way beyond my knowledge 😢, you can find your car by pressing the lights button on the card, the lights will turn on and you’ll find your car up to 50 meters, you can activate the developer mode, I will do a video!
@@MicheleP if there another way for remote start engine that make it without switch off after short time to make the car cool inside since I live in hot area
@@MicheleP Ciao, io ho i stesi problemi riesco a conlegarmi e ragiungo le inpostazioni dopo aver selto un inpostazione non poso piu a confermara o meglio confermo pero non viene memorizata ora non so se il problema e il obd che non ho comprato su amazon perce non lo mandano in croazia lo prezo su e-bay e sembra identico o se il problema e il ddt4all ce si sconlega... Comunqe grzie per il tuo lavoro che significa tanto a tante persone.
Hello there, thank's for your video. I've installed a v7 but not for a megane, it seems for kadjar, i've tried to downgrade, upgrade, but always gives an error. Can you help me? Cause i lost sensors, ac, etc. Please.
Hi Michele, thx a lot for your grate video. I have scenic IV year 2018 and i have updated the R-Link from the version 3.3.15.411 to 9.0.34.610 now i have two issues i would like to fix the temperatur is not shown anymore and it's in Ferenheit so it's display --F° and there is no sound from the radio or conected phone or the Navi. Do you know how i can fix this issue? Is there a way to downgrade again in case it's not possible to fix the issue? Best, Tim
Thanks a lot for your videos. Can you make a video on how to change the welcome screen on the dashboard? Also is there an option to disable the Automatic Electric parking brake when you shift to P?
@@MicheleP But I actually saw this mod performed by some users (still don't know how). Could you please test it? Also I saw a video here on youtube on how to disable the Automatic parking brake when you shift to P...did you test it on your car?
Hello Michele. Can u make a video or post here steps how to turn off TPMS? I have new alloy wheels without sensors and lights on dash screen are really annoying :D thanks, and keep making great videos :D
could you confirm if the delay before to get back the "alarm" once you start the recognition, is 10 minutes (long press on OK) If it's the case, to increase that delay seems to be very easy with DDT4ALL.
The very best solution could be to inactivate the TPMS sensors and switch the detection to an ABS sensor mode. Is there a such function in the Megane ECU ???
Hi mate, Can you help me please I have Renault megane 2017 by accident I press the massing seat present and now my screen it saying diag has been set invalid value try again how do I removed it.
Haha I'm struggling to obtain the update from v3.5.15.x to latest version (no one could help me with it , not ever renault service) and u do magic with that ddt4 all
Nice one bro! Is it possible to enable RS monitor? That would be fucking great! Btw, how are you satisfied with the Megane? I just ordered one for me, 1.3 tce 140hp, intens, full gt line.
I’m very happy with my meg! 1.6 130 dCi Bose version! Great handling and great torque. Unfortunately RS monitor is not available for “normal” Megane, because we don’t have a dedicate hardware in the r link 2 system!
thank you for the nice video I have a question about adaptif cruise control. Can we change the minimum value(40 km/h) of the adaptive cruise control? 🤔
Hello bro ! thank you for all your videos ! pls I have a question, Can I do a car diag with this software ? like reading the milleage (kilometers), error .... ?
Yes, you can read the real mileage in the abs cluster, ddt4all is not developed for read errors, for that you can find on apple store or google play store a free app to read and cancel errors via OBD, there are a lot!
Hola amigo, me gustaría saber si conoces alguna fórmula para poder resetear el R-Link y dejarlo de fábrica me da igual si es por el modo desarrollador o por OBD
Hmmmmm.. that’s hard! You have to buy a license for traffic info! And it’s very expensive! I got used with Waze.. I really don’t like Megane 4 navigation system!
Ciao sono un nuovo iscritto e ho apprezzato i 2 video visti...ho un captur 11/2017 restyling...si può fare qualcosa per la chiusura automatica cristalli da centralina?
Hello. Thank you for your video. I bought a obd2 Wi-Fi but when I open the upc-emm it loses connection and start the message "port closed" and "connection to elm lost". Can you please help me figure this out?
ciao, la race mode ce l'hai solamente se hai la megane RS, altrimenti non c'è modo di averla o attivarla. il tasto del controllo di trazione loi puoi attivare seguendo questo tutorial qua: ruclips.net/video/66XMgdm-iVo/видео.html
@@MicheleP ho visto una guida per attivare la modalità rs su reanult italia, ma non sanno se disattiva il tc... Più in generale avrei bisogno di un modo per disattivare il tc per uso pista, mi sapresti dire se c'è modo?
ciao io ho una Kadjar e vorrei mettere la visualizzazione dei sensori di parcheggio anche sil cruscotto davanti lato guida, come posso fare? mi aiuteresti? grazie
Hi Michele I also have a problem if you can help me I would be grateful. I entered Developer mode and changed 2 settings DEVELOPER MODE → DiagRw → GEN1_1 → CF_Preferential_Mode1 i chose Sport and to CF_Preferential_Mode2 i chose Comfort and after I saved and restarted the radio I got an error with the message ”Diag has been set invalid value. Try again configuration GEN1_1.CF_Preferential_Mode1 has invalid value ” and ”GEN1_1.CF_Preferential_Mode2 has invalid value ” and I can't do anything anymore, please help me.
Hi there, I like your videos, Just wondering if is possible to program key card with DDT4ALL? If so can you please make a video how to program the keycard, thanks
I have a black screen RLINK2, and the radio is still on, i hear the phone calls , but I can't access anything on the RLINK2. Please show me how to turn back to my old configuration through DDT4ALL
@@MicheleP i really appreciate your advise, but sorry to say that i don't know how to put original value through DDT4ALL, again please whould you show me how to do it via DDT4ALL.
@@MicheleP today. I did exactly what you did in your video, and activated sensors in cluster TDB, thanks a lot....but my screen RLINK2 is still black, how to activate display and turn it on? Please do something.( i checked screen orientation and changed it to portrait), but it doesn't work, i changed also welcome sequence, just as you did in the other video, now i Can hear welcome sound but no display) I need to turn-on my Rlink2.
Hi Michele i changed screen orientation to portrait I have 8.7" but it does't work. No display yet. I changed also welcome sequence but I still hear welcome sound without picture.
⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠
Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ
CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: ruclips.net/p/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj
Hello Michele, thank you very much for your great tutorials. I have few suggestions for future videos:
- Turn off traction control (ESP) in cars without RS button on central console,
- Turn on traffic sign recognition system in cars with front facing camera (rain sensor)
- Turn on automatic high/low beam
I need too, in Brazil the ESP is on all the time.
Hello
My name is Sorin, do you have any idea how to increase the number of Boot System 5092 to 5615 or higher? Thanks
Hey Mate, Alfred here from South Africa and I want to say thank you for your geek experience We Team Renault appreciate you man!
Though can you activate the RS Monitor on the Megane IV GT 1.8T (2018)??
Three things I wish to have and I hope you can help
1.remote start engine without car shutting down when I open the door.
2.panic button in case I wanna find my car somewhere in a packed parking lot
3.any way to use the browser on developer mode to install apps!
Thanks in advance and Gr8 video!
Hi, the remote start engine is way beyond my knowledge 😢, you can find your car by pressing the lights button on the card, the lights will turn on and you’ll find your car up to 50 meters, you can activate the developer mode, I will do a video!
@@MicheleP if there another way for remote start engine that make it without switch off after short time to make the car cool inside since I live in hot area
Hi just seen your videos A+
What are the Reserved ones for when going through RS etc?
Will this work on Kadjar 2017?
Hi Michele! Thank you for video! Is it possible to make it using Developer Side instead of DDT4ALL?
This can be activated only with DDT4ALL
@@MicheleP
Thanks!
hi, to make this you did some changes in odb2 connector?
Nope! All straight! Inverted pin are only for some specific modifies!
@@MicheleP I see the status in green "connected" and expert mode is on, but can't apply any change ...
when/where do you have trouble? whaen you apply the change the system freezes?
@@MicheleP Ciao, io ho i stesi problemi riesco a conlegarmi e ragiungo le inpostazioni dopo aver selto un inpostazione non poso piu a confermara o meglio confermo pero non viene memorizata ora non so se il problema e il obd che non ho comprato su amazon perce non lo mandano in croazia lo prezo su e-bay e sembra identico o se il problema e il ddt4all ce si sconlega... Comunqe grzie per il tuo lavoro che significa tanto a tante persone.
Hello there, thank's for your video. I've installed a v7 but not for a megane, it seems for kadjar, i've tried to downgrade, upgrade, but always gives an error. Can you help me? Cause i lost sensors, ac, etc. Please.
Hi Michele, thx a lot for your grate video. I have scenic IV year 2018 and i have updated the R-Link from the version 3.3.15.411 to 9.0.34.610 now i have two issues i would like to fix the temperatur is not shown anymore and it's in Ferenheit so it's display --F° and there is no sound from the radio or conected phone or the Navi. Do you know how i can fix this issue? Is there a way to downgrade again in case it's not possible to fix the issue? Best, Tim
Thanks a lot for your videos. Can you make a video on how to change the welcome screen on the dashboard? Also is there an option to disable the Automatic Electric parking brake when you shift to P?
Unfortunately welcome sequence can be changed only in the r-link screen..
@@MicheleP But I actually saw this mod performed by some users (still don't know how). Could you please test it? Also I saw a video here on youtube on how to disable the Automatic parking brake when you shift to P...did you test it on your car?
hi I have upgraded from factory default 2.2 to 3.3 In ddt4all wich version i will choose in nav cluster ?
Hello Michele. Can u make a video or post here steps how to turn off TPMS? I have new alloy wheels without sensors and lights on dash screen are really annoying :D thanks, and keep making great videos :D
good question ;-) is it possible ???
could you confirm if the delay before to get back the "alarm" once you start the recognition, is 10 minutes (long press on OK)
If it's the case, to increase that delay seems to be very easy with DDT4ALL.
Yes, it’s possible, and is one of the next videos!
@@MicheleP Greeeeeat. Please, before next winter ;-)
The very best solution could be to inactivate the TPMS sensors and switch the detection to an ABS sensor mode. Is there a such function in the Megane ECU ???
Hi mate, Can you help me please I have Renault megane 2017 by accident I press the massing seat present and now my screen it saying diag has been set invalid value try again how do I removed it.
You simply have to do the same procedure and undo the command you changed. Then reset the r-link2
@@MicheleP how can do the same procedure again if I can’t go back to media or to photo
Hi great videos. Is it possible to find the rs monitor from the megane rs??
yes, but i won't treat this argument. too dangerous :) you have to download the app from renault server, using your VIN. so...
Haha I'm struggling to obtain the update from v3.5.15.x to latest version (no one could help me with it , not ever renault service) and u do magic with that ddt4 all
Is there a way to change the goodbye logo too ?
I am not able to connect ddt4all with obd. do you do that even on the internet? by wi-fi? or it is simply the option you choose. thanks
continue. come. thank you
Thanks!
Hi ,thanks for the video. maybe you know how to enable the traffic sign on the cluster? i have the sedan model. thanks!
hi! the traffic sign you mean speed limits?
@@MicheleP yes !!
Thank you. Whaiting for the fade off day led while indicator turns on.
it will be online in few days! :)
Nice one bro! Is it possible to enable RS monitor? That would be fucking great! Btw, how are you satisfied with the Megane? I just ordered one for me, 1.3 tce 140hp, intens, full gt line.
I’m very happy with my meg! 1.6 130 dCi Bose version! Great handling and great torque. Unfortunately RS monitor is not available for “normal” Megane, because we don’t have a dedicate hardware in the r link 2 system!
@@MicheleP Thank you for this response. Please keep up with good work! Thanks.
I am not 1.5 diesel edc sluggish and gearbox is funny sometime running in neutral gear
thank you for the nice video I have a question about adaptif cruise control. Can we change the minimum value(40 km/h) of the adaptive cruise control? 🤔
Hi! I have acc too and I really want to lower the speed! I’m working to find where to change values! I’ll do it for sure as soon as possible!
- ACC
-- CMF1_Frontal_radar_V4C_0_light
--- Configuration
---- Configuration_state_management_kmh
@@wolfgangeder448 thnx so much i ll try at first time
Yo wolfgang!!! Super! Thank you so much!! Which speed you set?
Yo wolfgang!!! Super! Thank you so much!! Which speed you set?
Hello bro ! thank you for all your videos ! pls I have a question, Can I do a car diag with this software ? like reading the milleage (kilometers), error .... ?
Yes, you can read the real mileage in the abs cluster, ddt4all is not developed for read errors, for that you can find on apple store or google play store a free app to read and cancel errors via OBD, there are a lot!
Michele Predieri Grazie !
Nice job !!!
Thanks!
does it work with a 7 inch version? Thanks your videos.
Yes, if your car shows a welcome animation on the 7” screen yes!
Hola amigo, me gustaría saber si conoces alguna fórmula para poder resetear el R-Link y dejarlo de fábrica me da igual si es por el modo desarrollador o por OBD
Hi michele, does it work with the intens version megane ?
yes! it works in all megane models
hi do you have a tutorial to install rs monitor? thanks
Can you program entry cards with with app?
Hey, we can also change dashboard to appear in the Talisman way? I cannot find where it is in ddt4
i guess not, you can only change car type in multisense
hello I have a Renault megane grandtour gt line and my r link is in version 9.0.34.616 I connect the ddt4all but it does not show the audio settings
Hi Michele, non related to this video. Do you know how to enable traffic in the gps? My car came with that disabled.
Hmmmmm.. that’s hard! You have to buy a license for traffic info! And it’s very expensive! I got used with Waze.. I really don’t like Megane 4 navigation system!
Thanks! I was asking because I haven’t been able to make car play work in mine (even though I have followed the steps with ddt4all)
Just got a Megane and have been looking for the r-sound app but it seems it is only on GT models? How can it be enabled or installed? Thanks!
hi luke! yes, unfortunately r-sound is only for gt models, on normal megane you'll have only the A110 sound, so pretty useless!
I have managed to do this successfully with DDT4ALL however only the Alpine A110 model seems to work
Michele Predieri could you make a video showing us what each option in the DDT4ALL does/changes? There are many different options!
So you have the r sound without a gt model car? If so. How did u do that?
more and more greetings
How can i know the type of multimedia i have?
Ciao sono un nuovo iscritto e ho apprezzato i 2 video visti...ho un captur 11/2017 restyling...si può fare qualcosa per la chiusura automatica cristalli da centralina?
Purtroppo no, devi fare un doppio impulsò sul pulsante di chiusura sul telecomando
Hello. Thank you for your video. I bought a obd2 Wi-Fi but when I open the upc-emm it loses connection and start the message "port closed" and "connection to elm lost". Can you please help me figure this out?
@luis did you find a solution? I have the same issue with a 2016 Koleos Renault
@@oaks37 not yet. I bought a second obd2 from another brand and still didn't work. I"m waiting for one with usb connection, not Wi-Fi.
Puoi fare un video su come sostituire la eco mode con la race mode? E se lo sai, sapresti dirmi se la race mode toglie il controllo della trazione?
ciao, la race mode ce l'hai solamente se hai la megane RS, altrimenti non c'è modo di averla o attivarla. il tasto del controllo di trazione loi puoi attivare seguendo questo tutorial qua: ruclips.net/video/66XMgdm-iVo/видео.html
@@MicheleP ho visto una guida per attivare la modalità rs su reanult italia, ma non sanno se disattiva il tc... Più in generale avrei bisogno di un modo per disattivare il tc per uso pista, mi sapresti dire se c'è modo?
Hi Michael, can you give me the name of the program in laptop 💻 thanks 🙏
program name is ddt4all
Staicu Flavius thank you my friend
Hi, this ODB works on 2017/01 megane iv break gt 165 dci ?
Yes, it works perfectly!
ciao io ho una Kadjar e vorrei mettere la visualizzazione dei sensori di parcheggio anche sil cruscotto davanti lato guida, come posso fare? mi aiuteresti?
grazie
ciao! settimana prossima esce il video dedicato!!! non perdertelo!
Hello good afternoon
can you activate RS monitor in a meagne 4 GT?
nope, there's a CPU in the RS which is not present in other Meganes
Hi Michele I also have a problem if you can help me I would be grateful. I entered Developer mode and changed 2 settings DEVELOPER MODE → DiagRw → GEN1_1 → CF_Preferential_Mode1 i chose Sport and to CF_Preferential_Mode2 i chose Comfort and after I saved and restarted the radio I got an error with the message ”Diag has been set invalid value. Try again configuration GEN1_1.CF_Preferential_Mode1 has invalid value ” and ”GEN1_1.CF_Preferential_Mode2 has invalid value ” and I can't do anything anymore, please help me.
I tried to fix with program ddt4all but I can't find the section where I can make the settings as before
Hi there, I like your videos, Just wondering if is possible to program key card with DDT4ALL? If so can you please make a video how to program the keycard, thanks
Nope, the keycard can only be programmed with the canclip, which only dealers have it
@@MicheleP ok, thanks
I have a black screen RLINK2, and the radio is still on, i hear the phone calls , but I can't access anything on the RLINK2. Please show me how to turn back to my old configuration through DDT4ALL
As I said you, you have to weir back original values, and everyhin will return to normal; if not you have to go o dealer and reload software
@@MicheleP i really appreciate your advise, but sorry to say that i don't know how to put original value through DDT4ALL, again please whould you show me how to do it via DDT4ALL.
@@MicheleP today. I did exactly what you did in your video, and activated sensors in cluster TDB, thanks a lot....but my screen RLINK2 is still black, how to activate display and turn it on? Please do something.( i checked screen orientation and changed it to portrait), but it doesn't work, i changed also welcome sequence, just as you did in the other video, now i Can hear welcome sound but no display) I need to turn-on my Rlink2.
Hi Michele i changed screen orientation to portrait I have 8.7" but it does't work. No display yet. I changed also welcome sequence but I still hear welcome sound without picture.