Tutorial is correct. Thanks to author. I did it and it worked. But I have Megane GT 205 EDC version and the area on display where the temperature should be is occupied by Renault Sport Logo((( Thus, temp and Renault Sport Logo are merged at the same place( . I didn’t found how to deactivate Renault Sport Logo. As for correct temp display , either Renault Sport Logo should be deleted or position of temperature should be moved.
Excellent videos Michele! Thank you for shareing the knowledge! Any ideas on how to set the default multisense mode to perso? And is there any chance to do the trick with the right side mirror for left hand drivers move down when in reverse on the Megane? Anyhow, keep up the great work and hope that you and your loved ones are safe from that pandemic bastard that we're all fighting against!
Hi Michelle. Thx for your really good Videos and Help. Other Question...do you know how to change the Dashboard Brightness ? The Day-Modus is good, but the Night Modus Brightness is for me to dark. I have a Kadjar 2016. Is there a function that you can activate via DDT4All ?
Hello, Can the oil lvl be shown in the car display ? Under Conf Etretien ( 2 menus up Conf VEH) , at the bottom there is a note Oil level CF and the selection is with or without . So is this for showing the oil lvl - like the old meganes at start or is completely different ?
Hi Michele, Thx for the usefull tutorials. when do we expect a new video? maby something with changing the screen behind the steering wheel with different colors or templates?
Hi. Thanks for the sharing. May I ask how do I resolve the issue of NO DATA? I’m using the wifi ver, but I can’t seem to read any data from the ECU via ddt4all
Hi Michele Thank you for this video !!!! I would like to know if you already tried the cluster "cluster-TdB" / "Cluster 15-40-v3.30.02" / "schermi" / "Conf_MPU" to can modify the skin of the dashboard (for example) not with the Rlink2 but with the steering wheel buttons ? Thanks
Hi Michele, Thank you for this video - it is great :-) I just programmed the temperature today on my Megane IV I can see in your video at 4:13 f.ex. That it says “neutral” in your dashboard in the bottom right corner. I assume this is the gear position. Do you know how to show this, which parameter? I have a manual gearbox. In my car it shows “ECO” in this position.
Nope, that is not the gear, it’s the multisense mode, which can be eco, neutral, confort, sport or perso. You should have a button in your car which should you get able to change those driving modalities
Thanks for the video!!! Can I request a DDT4ALL - Laguna 3(2014) START / STOP off? after pressing the "SEND" command should I also press "ECU RESET" ??
First of all, thank you for your videos. On Megane IV, the speed limit indicator is shown on the digital dashboard. My car is a Koleos II, is it possible to also have this indicator in the digital dashboard ? Thnk you in advance, best regards.
hi Michele, if you active (or don't deactivate) the driving style indicator, it will be "mixed" with the temperature ;-) It's the same with an RS or GT :-( The driving style is replaced by an RS or GT logo which interfer with the temperature Is it possible to disable that logo ??? (not an issue for the driving style indicator) Thx
@@MicheleP How can i choose the temperature ? if i follow the instructions of the video, i have both the temperature and the logo displayed and the temperature is partially hidden by the logo and so it's unreadable. There's no way to desactivate the logo ?
Hola soy de Chile, me puedes ayudar para que me aparezca el estilo de manejo en el panel de instrumentos. Solo me aparece el modo eco en color verde en el Display. En la radio táctil puedo seleccionar (confort-eco-neutral-sport-perso), pero en el panel de instrumentos no me lo indica. Quiero que quede igual a la configuracion de temperatura en Display. Por último, puedo realizar esta configuracion en el modo ingeniero?. porque no tengo el dispositivo OBD para acceder con la plataforma 4DDTAll. Gravias
ciao michele, vorrei attivare l'orologio sul display centrale, ma non ho idea come fare, il mio rlink 2 per il momento e fuori servizio cioè tutto il sistema autoradio e andato e va sostituito, nel frattempo visto il largo tempo per la sostituzione ho messo i sensori di parcheggio sul display centrale ma non riesco a intravedere clock, dammi un imput, grazie
technically YES, because you are not "in charge" to do hacks on the car.. but if you have a problem you just change values back to originals and nobody will ever see :)
Ciao Michele, potresti mostrare su un video come entrare nel modalità esperto(come sulla mercedes) in modo che i freni posteriori(con la fernamano elettrica) sono molle come dire in modo che basta che le porto un pó nella posizione iniziale e tiro fuori le vecchie e metto le nuovo. Potresti mostrare su un video perfavore? Grazie mille
Ciao Michele, come mai su una megane 3 non mi appare più la temperatura sul display Navi? Ho provato ad entrare con ddt4all e attivare show external temperature, ma niente, penso il software ddt4all non sia buono, perché non mi fa nessun cambiamento, potresti darmi una mano?
@@MicheleP gb.e-guide.renault.com/eng/Megane-hatch/DRIVING-ADVICE-ECO-DRIVING My friend had tried activating it in ddt4all for me, and it does come out on settings> user settings>free wheel in eco mode. I toggle on, but then it snaps back to off on the display. I also don't see the free wheel light come on.
yes! funziona anche su Kadjar, l'importante è che selezioni l'auto corretta in DDT4ALL, e soprattutto che disattivi l'indicatore di stile di guida (quella sorta di alberello che c'è dove ci andrebbe la temperatura), altrimenti hai le due grafiche sovrapposte
Hello Michele. I ordered the same OBD and installed the software on Windows 7, my laptop sees the wifi and connects to it, but the ddt4all gives some error after i select wifi->i understand...(cannot import some module or whatever) . What am i doing wrong?
@@MicheleP it worked on another laptop and windows 10. Is it possible to activate that the windows go up when i press the lock twice if i have the standard key and not the card?
I have a request bro. Is it possible to fix the pressure tires in the cockpit display under right from the speed o meter? Now you can scroll to show the pressure tires display but is not fixed. If you close youre car and start again the tire display is gone. Also i wish for the consumption display and pressure tires at the same time, now either you can see the consumption or pressure tire and one time. I hope this is fixable.
@@MicheleP My car is a megane 4 sedan and It appears on the dashboard in the same place of the temperature display in this mod (in addition to the roof indicator) . I've tested this mod and it worked well, but the seat belt warning that keeps illuminating on the dashboard when the driver or passenger don't buckle their seat belt doesn't appear anymore but the warning sound of course still works. Thanks a lot for your videos. I really wanted to see the external temperature when I am driving.
i have a problem in my OBD when i connect the OBD to the car all goes perfect but when i try to select an option it deconnect automatically even if i put a higher value in the input Can timeout !! can you help us with this please ?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Tutorial is correct. Thanks to author. I did it and it worked. But I have Megane GT 205 EDC version and the area on display where the temperature should be is occupied by Renault Sport Logo((( Thus, temp and Renault Sport Logo are merged at the same place( . I didn’t found how to deactivate Renault Sport Logo. As for correct temp display , either Renault Sport Logo should be deleted or position of temperature should be moved.
yeah, thanks for the feedback, i'm working to find a cluster in which the renault port logo is, so you can choose to have temp or logo.
@@MicheleP Any update ?
Can you set the engine oil temperature?
Excellent videos Michele! Thank you for shareing the knowledge! Any ideas on how to set the default multisense mode to perso? And is there any chance to do the trick with the right side mirror for left hand drivers move down when in reverse on the Megane? Anyhow, keep up the great work and hope that you and your loved ones are safe from that pandemic bastard that we're all fighting against!
Hi, excellent video, do you know how to add trailer so it disconnects the back sonar when trailer
is attached
Good job, thanks a lot, I learn to change several things in my talisman with yours videos.
yo! glad that my videos are useful! stay tuned for more!
Bom vídeo, para fazer numa Renault kadjar, é da mesma forma ? Mas configurações iniciais?
Hi Michelle. Thx for your really good Videos and Help. Other Question...do you know how to change the Dashboard Brightness ? The Day-Modus is good, but the Night Modus Brightness is for me to dark. I have a Kadjar 2016. Is there a function that you can activate via DDT4All ?
Hello,
Can the oil lvl be shown in the car display ? Under Conf Etretien ( 2 menus up Conf VEH) , at the bottom there is a note Oil level CF and the selection is with or without . So is this for showing the oil lvl - like the old meganes at start or is completely different ?
Hi Michele, Thx for the usefull tutorials. when do we expect a new video? maby something with changing the screen behind the steering wheel with different colors or templates?
well.. unfortunately that's not possible! next video wil be how to turn off the traction control, which is not possible by default!
Michele Predieri thats cool!
Hi. Thanks for the sharing. May I ask how do I resolve the issue of NO DATA? I’m using the wifi ver, but I can’t seem to read any data from the ECU via ddt4all
Nice video. You have a list of al options that can be coded?
can you do this without OBD ? through developer mode only?
Hi Michele
Thank you for this video !!!!
I would like to know if you already tried the cluster "cluster-TdB" / "Cluster 15-40-v3.30.02" / "schermi" / "Conf_MPU"
to can modify the skin of the dashboard (for example) not with the Rlink2 but with the steering wheel buttons ?
Thanks
I try and i let u know!
Hi and thanks did you modify the obd interface or not thanks for answering
Do you know how can i do update software to Clima ? In winter mu car makes cold, no heat. Just on HI makes heat.
Hi Michele,
Thank you for this video - it is great :-)
I just programmed the temperature today on my Megane IV
I can see in your video at 4:13 f.ex. That it says “neutral” in your dashboard in the bottom right corner. I assume this is the gear position. Do you know how to show this, which parameter? I have a manual gearbox. In my car it shows “ECO” in this position.
Nope, that is not the gear, it’s the multisense mode, which can be eco, neutral, confort, sport or perso. You should have a button in your car which should you get able to change those driving modalities
@@MicheleP Ok thanks. I have checked my car. My car is a "Zen" version and it does not have Multimode. It has only a ECO button. Ie. ECO ON or OFF
How to enable auto folding mirrors with this hack? Thank you.
Thanks for the video!!! Can I request a DDT4ALL - Laguna 3(2014) START / STOP off? after pressing the "SEND" command should I also press "ECU RESET" ??
Nope, those commands are just one click
First of all, thank you for your videos.
On Megane IV, the speed limit indicator is shown on the digital dashboard.
My car is a Koleos II, is it possible to also have this indicator in the digital dashboard ?
Thnk you in advance, best regards.
Hello! Now after temperature activated, it is mixed with ECO icon when ECO mode is enabled. Did you resolve that or not?
hi Michele, if you active (or don't deactivate) the driving style indicator, it will be "mixed" with the temperature ;-)
It's the same with an RS or GT :-( The driving style is replaced by an RS or GT logo which interfer with the temperature
Is it possible to disable that logo ??? (not an issue for the driving style indicator)
Thx
yep! thanks for the feedback! if i find the cluster i do a video for sure
@@MicheleP Hi, any update on this ? Thx for the video btw.
@@maximelinot3523 hi, actually there's no way to have one or the other activated. you have to choose which one you want :(
@@MicheleP How can i choose the temperature ? if i follow the instructions of the video, i have both the temperature and the logo displayed and the temperature is partially hidden by the logo and so it's unreadable. There's no way to desactivate the logo ?
@@MicheleP Ho lo stesso problema con il logo, si sovrappone alla temperatura. Per favore, come rimuovere il logo?
Hola soy de Chile, me puedes ayudar para que me aparezca el estilo de manejo en el panel de instrumentos. Solo me aparece el modo eco en color verde en el Display.
En la radio táctil puedo seleccionar (confort-eco-neutral-sport-perso), pero en el panel de instrumentos no me lo indica. Quiero que quede igual a la configuracion de temperatura en Display.
Por último, puedo realizar esta configuracion en el modo ingeniero?. porque no tengo el dispositivo OBD para acceder con la plataforma 4DDTAll. Gravias
ciao michele, vorrei attivare l'orologio sul display centrale, ma non ho idea come fare, il mio rlink 2 per il momento e fuori servizio cioè tutto il sistema autoradio e andato e va sostituito, nel frattempo visto il largo tempo per la sostituzione ho messo i sensori di parcheggio sul display centrale ma non riesco a intravedere clock, dammi un imput, grazie
Can you help me for activete the set tp option in renault LOGAN with ddt4all plz
Can you please share a link to download the DDT4All
Does it work in the Devloper Mode too?
Hello, Its posible to show the engine temperature?
Hi Michele, Thank you man about your effort.
just a question dose this hack will effect the manufacturer warranty or no?
technically YES, because you are not "in charge" to do hacks on the car.. but if you have a problem you just change values back to originals and nobody will ever see :)
Ciao Michele, potresti mostrare su un video come entrare nel modalità esperto(come sulla mercedes) in modo che i freni posteriori(con la fernamano elettrica) sono molle come dire in modo che basta che le porto un pó nella posizione iniziale e tiro fuori le vecchie e metto le nuovo. Potresti mostrare su un video perfavore? Grazie mille
Hello
I need help. Installing my car (laguna 3 2009 ph1) electric seats, and seat heating, how do I turn on the car computer? DDT4All
thanks man. Your are on the vibe.
Any way to display the time in the digital dashboard ?
Hello !
How can i clear the dashboard errors, i disconnected the battery and the dashboard lights up
Hi Michele, Is it possible to set the time into the dash? The same as the temperature which I have set thanks to your video.
nope unfortunately not :(
@@MicheleP Ok Thank you!
Ciao Michele, come mai su una megane 3 non mi appare più la temperatura sul display Navi? Ho provato ad entrare con ddt4all e attivare show external temperature, ma niente, penso il software ddt4all non sia buono, perché non mi fa nessun cambiamento, potresti darmi una mano?
Can u tell me how can I use the r-sound effect in my car?
Ciao, funziona anche con Dacia o solo con Renault?
I try to change tyre pressure from bar to psi and it not save the change.. always back to bar :(
hello help. the temperature don't appear in my Megan
I tried several times to show the heat indicator but it did not appear
Any chances you know how to enable auto folding mirrors?
well, you should have a button in the door...
Do you have answer for this question? I have same trouble with this. Thank you
Thanks!! Would you have a tutorial on activating free wheel in eco mode. My region doesn’t come standard.
mmmm.. what you mean with "free wheel"?
@@MicheleP gb.e-guide.renault.com/eng/Megane-hatch/DRIVING-ADVICE-ECO-DRIVING
My friend had tried activating it in ddt4all for me, and it does come out on settings> user settings>free wheel in eco mode. I toggle on, but then it snaps back to off on the display. I also don't see the free wheel light come on.
ok, now i got it. do you have EDC or manual gearbox?
Michele Predieri EDC. DCI 110
You have the needle style fuel gauge instead of the bars. Is there a way I can get this for my Kadjar ?
Yes, it’s in the speed dashboard, which is separate from the gauges ones
Brilliant. Where can I find that? I'm a total novice at this
ciao bellissima guida!!!funziona anche su kadjar giusto? usando carplay devo ogni volta uscire per veder la temperatura :(
yes! funziona anche su Kadjar, l'importante è che selezioni l'auto corretta in DDT4ALL, e soprattutto che disattivi l'indicatore di stile di guida (quella sorta di alberello che c'è dove ci andrebbe la temperatura), altrimenti hai le due grafiche sovrapposte
Hello Michele. I ordered the same OBD and installed the software on Windows 7, my laptop sees the wifi and connects to it, but the ddt4all gives some error after i select wifi->i understand...(cannot import some module or whatever) . What am i doing wrong?
hi, do you have the latest DDT4ALL version?
@@MicheleP it worked on another laptop and windows 10. Is it possible to activate that the windows go up when i press the lock twice if i have the standard key and not the card?
hmmmm .. this is tough! i guess not, but i have to check it!
I have a request bro. Is it possible to fix the pressure tires in the cockpit display under right from the speed o meter? Now you can scroll to show the pressure tires display but is not fixed. If you close youre car and start again the tire display is gone. Also i wish for the consumption display and pressure tires at the same time, now either you can see the consumption or pressure tire and one time. I hope this is fixable.
i really would love this could be possible, but unfortunately this is not! it will be very helpful.. but Renault didn't provide this option :(
@@MicheleP Ok but if there is a possibility i appreciate to hear or see the video of it. Thanks man.
if there's a possibility i'll let u know for sure!
If i have a business one can i put navigation on it?
hmmm.. nice question, you have to see if your radnav already includes maps and if they are only in "hidden mode"
I dont have the small navigation also. Can i put it too?
What happens to the seat belt status that is displayed when you first start the engine after you enable this mod?
the seat belt status is on the roof... where did you see it?
@@MicheleP My car is a megane 4 sedan and It appears on the dashboard in the same place of the temperature display in this mod (in addition to the roof indicator) . I've tested this mod and it worked well, but the seat belt warning that keeps illuminating on the dashboard when the driver or passenger don't buckle their seat belt doesn't appear anymore but the warning sound of course still works.
Thanks a lot for your videos. I really wanted to see the external temperature when I am driving.
Yes same question here, will 5 signs seat belts disappear also like driving mode (Tree)?
Ciao Michele te riesci attivare Android auto su Rlink 2 per un Megane 4 berlina
Ciao! Su r-link 2 si, però deve avere la versione 3.3 almeno, altrimenti non funziona!
i have a problem in my OBD when i connect the OBD to the car all goes perfect but when i try to select an option it deconnect automatically even if i put a higher value in the input Can timeout !! can you help us with this please ?
what kind of OBD scan tool you have? the one i suggested?
Not exactly because this one it's not shipped to my country !
are you using a USB or Bluetooth interface?
@@MicheleP im using wifi interface
Часы нельзя также вывести?
The Best...
Ciao Michele, c' è possibilità di attivare il Launch Control su Megan GT Sport 1.6 edc 165cv cambio automatico?
ciao simone, una volta provai; se tiri entrambi i paddles verso di te con il cambio in manuale e modalità sport non ti si attiva?
@@MicheleP No, va a limitatore e bon, mentre la 205 cv tirando entrambe i paddle attiva il launch control con luci di start.
Azz allora sulla Diesel non si può fare! Io avevo provato il benzina e pensavo fosse uguale.
music toooo loud,, yor voice lower volume!!!!!! don't you check before uploading????
you're the only one who noticed it, so.. NO the music is not too loud.
or the first one who cares.
that you believe, the music is not too loud, gives us more answers then possible questions...
Hi! can i do the changes in Developer mode in car?