Would it be a bad idea to run high octane fuel through the bikes? Like turbo blue 110 octane for example? Would that help with the fuel gumming up issue?
Carb cleaner, I pull the pump out and spray out the screen in the bottom of the pump. And I look in the bottom of the fuel pump container see if it got crap in it.
It's an LTR I replaced the gas tank the injector cleaned cockpit replaced fuel filter put all new gas hoses on replaced the temperature sensor new spark plugs long story short I dumped 5 grand into a new motor rebuild and the FI/temp light just keeps blinking fuel pump works n it's got 3 hrs on it n it's been over a year n I just can't figure it out so if ya could help me with a solution.. I'd be great full..
So if the red light is blinking it puts it it to safe mode, so you need to get the code off the bike, I made a video that shows you how to get it. Once you get the code should narrow it down. Let me know
My runs bogs when you give it gas sounds like it's sucking air. I've changed the regulator and new pump still does the same thing any idea?
Clean your injector , and you can dump you gas out of your tank and wash it out with a garden hose , then let it dry. But my bet is injector.
Would it be a bad idea to run high octane fuel through the bikes? Like turbo blue 110 octane for example? Would that help with the fuel gumming up issue?
Yes it would, I run half and half, 110 and non-ethanol, super, and I don’t have an issue.
Hey man, what’s the best way you know to clean out your fuel pump?
Carb cleaner, I pull the pump out and spray out the screen in the bottom of the pump. And I look in the bottom of the fuel pump container see if it got crap in it.
What T did you get too replace the swirl filter
1/4 brass T. I believe is the size
What electrical issue can cause the bike not to get any fuel?
Fuel pump not kicking on
If it’s an ltr, you can turn the key on and listen, if the fuel pump kicks on. If not could be a fuse or the connection going into the fuel pump.
It's an LTR I replaced the gas tank the injector cleaned cockpit replaced fuel filter put all new gas hoses on replaced the temperature sensor new spark plugs long story short I dumped 5 grand into a new motor rebuild and the FI/temp light just keeps blinking fuel pump works n it's got 3 hrs on it n it's been over a year n I just can't figure it out so if ya could help me with a solution.. I'd be great full..
So if the red light is blinking it puts it it to safe mode, so you need to get the code off the bike, I made a video that shows you how to get it. Once you get the code should narrow it down. Let me know
Ok I will thank you
what size hose are you running on both sides of the in-line?
it is half inch hose, the same as what is on there