Это видео недоступно.
Сожалеем об этом.
Set Up Your Tacoma with GMRS Radio and Dash Mount!
HTML-код
- Опубликовано: 7 авг 2024
- My Toyota Tacoma is ready for adventure with a Midland MXT275 GMRS Radio and phone dash mount from Cali Raised LED! Get an overview of the radio and the dash mount, but stay tuned for an easy to follow guide on how to install everything! Radio install will include tips on cleanly and safely hardwiring power and an external antenna.
OUR SOCIALS:
Subscribe, enable notifications and follow me on Instagram: / jasonexplainsthings
Follow Chris on Instagram here: / pnw_bison
Check out my new website! jasonexplainsthings.com/
Get a Jason Explains Things Sticker! jasonexplainsthings.com/store...
MORE VIDEOS TO CHECK OUT:
Toyota 4Runner, Chevy Colorado GMRS Install: • GMRS RADIOS: BEST Over...
Tacoma Oil Change Video: • Toyota Tacoma 5K Mile ...
Cali Raised LED Dash Mount Install Video: • How to Install Cali Ra...
Playlist of all our 4x4 Mod Videos: • 4WD Truck and SUV Mods...
PNW Adventure Playlist: • PNW Adventure Videos!
GET YOUR CALI RAISED LED DASH ACCESSORY MOUNT HERE: caliraisedled.com/products/da...
CALI RAISED LED TACOMA DITCH LIGHT BRACKET: caliraisedled.com/products/20...
Use Code "JASONEXPLAINS5" For 5% off your order from @CaliRaisedLED.
Thanks @Havoline for supporting my channel! For more info on Havoline PRO-RS Oil check out this link: www.chevronlubricants.com/en_...
Info on GMRS license from the FCC: www.fcc.gov/wireless/bureau-d...
PARTS AND TOOLS USED IN VIDEO (Amazon Affiliate Links):
@MidlandUSA MXT275 Bundle: amzn.to/3QUQEVr
@guildoutfitters1863 Tacoma Extended Fuse Cover: guildoutfitters.com/products/...
Add-A-Circuit Fuse Tap: amzn.to/3QUuS4d
Solder Wire Connectors: amzn.to/3ZRCPel
Heat Shrink Wire Terminals: amzn.to/3ZRCSXz
Heat Shrink: amzn.to/3H22AzV
Mounting Tape: amzn.to/3H0hjLT
Electrical Tape: amzn.to/3wspj3f
Wire Braided Sheathing: amzn.to/3woYFZo
Irwin Cobalt Drill Bits: amzn.to/3J8bTRQ
Wire Strippers: amzn.to/3kBszql
Milwaukee M12 Fuel Drill: amzn.to/3XNXnCF
Milwaukee M18 Heat Gun: amzn.to/3XO5gYV
As an Amazon Associate I earn from qualifying purchases.
CHAPTERS:
0:00 Midland MXT275 GMRS Radio Overview
1:15 Midland Radio Range Test
3:06 Cali Raised LED Dash Accessory Mount Overview
4:21 Install Begins! Parts and Tools
5:37 Mounting Radio Antenna
6:39 Routing Antenna Cable Into Cab
7:40 Mounting Radio
8:10 Sponsored Segment
9:16 Radio Power Wiring
12:12 Installing Dash Accessory Mount
#jasonexplainsthings #toyotatacoma #gmrs #offroad
If I get the license and install one of these, but I travel alone will this work to call for help if needed or even find other people exploring?
Great Question! I'm pinning this. Yes, definitely. I know in my area there are often people (radio nerds... I say that as a compliment) who often will monitor transmissions and even call and check on people from time to time. There are GMRS repeaters set up in several areas to increase range. It's 100% not a guarantee, but it couldn't hurt. If you travel alone a lot I'd also suggest a satellite communicator like the Spot-X or Garmin InReach.
@@JasonExplainsThings yes I plan on getting one of those emergency ones, thanks. If I look hard enough I probably still have my Army rescue beacon somewhere.
I travel all over CA, NV & AZ. I monitor GMRS (scan). I do hear people and the GRMS radio.
That is a super clean mounting rail. Hope we have something similar for the FJ! I have the same GMRS radio. So much better than CBs years ago
Yeah getting fitment was a little tricky by design. But I like how low profile it is. I just wouldn't use it to mount a large tablet because that would be too much weight in my opinion... since it's relying completely on the tabs that hold the radio bezel in place. But for a phone and a gopro... it works well.
The Taco Garage Dash Multi-Mount with RAM balls works great too! I have an 11" iPad Pro, an iPhone MagSafe Charger, and the KG1000G+ front panel attached to it. Very happy so far.
Just got the TG DMM last week and have a quadlock 1" ball adapter (labeled for motorcycle usage) with their wireless charger head that should be in tomorrow. The next install will be the MXT275 and use an RJ45 socket to run the handset down through the lower dash and remove it when not needed and keep the main unit tucked in the dash
For passing stuff through the rubber grommets, wire pulling lube helps. Non-conductive and non-corrosive/rusting. Home Depot carries it, Klein tools brand I think.
For sealing the boot, marine grade 3M silicone. Would be good in addition to that zip tie (really should be primary, zip tie as secondary). Really important if passing through a cut in a flat faced grommet rather than one like this Tacoma has.
Great video as always Jason! Seeing your channel come up in my feed makes any day so much better!!!! ❤
Thanks! Good tip on the silicone and lubricant. I used a little glass cleaner as lube... didn't film it really because I was delirious with a cold. Surprised the install footage turned out as well as it did! :-)
@@JasonExplainsThingsI’m not surprised at all. You are the GOAT!
Very nice install. I just released my install on the same unit and I used the molle panels from Cali Raised. The Tacoma is looking good!!
Love these videos! Don't think I'm confident enough to attempt this one, but I enjoyed the tutorial nonetheless.
If the wiring is the issue I'd check out the first 4Runner radio video. That one I used the 12v outlet because it was really convenient to do so. But yeah I get it. Drilling holes is nerve-wracking... until you do it a bunch of times and then don't care anymore. 😅
Before doing the final installation I actually used the radio that way and just passed the removable magnetic antenna cable through the door. I wouldn't do it that way permanently, but it worked fine for the weekend. OR... just get a handheld GMRS radio to be able to chat with your trail buddies. Range isn't as good but still works.
Good content breh
Been watching 2 Fast 2 Furious lately?! If so, no judgement from me.
PNW rules
I'd get a gearkeeper too, that way you don't have to grab for the mic of the clip and put it back everytime.
Thank you for your videos. And GOD BLESS.
Great video. I tapped my power wire to my QI wireless charger switch (blue wire). Ground wire to a frame bolt located behind the radio. Now i can turn it off and on using the QI switch. Mounted the base in glove box.
That's an awesome idea. I considered deleting that button and using it for something else because I never use it. If carplay was wireless maybe I would.
You drilled holes, nooooo lol, just teasing buddy, does anyone still use CBs for off-roading anymore? Back in my day that’s what we used, great video 👍😁
So everyone I know personally switched to GMRS. Even the older Jeep crowd has switched at this point. Might be a regional thing. Yeah drilling holes is always a little nerve-wracking. Most pieces are pretty easy to replace if it came to that. And the tiny holes on the side of the center console could be easily patched. I made them very small for that reason.
I still hear people on CB where I hunt and go off-roading in SE, OH. I run both in my truck. CB is still the best option when driving on the highway for traffic info.
Moving the antenna to the roof rack or using a “better “ antenna will greatly improve your performance. The higher the better.
True. The performance I’m getting has been great for how I use it.
Do you have a link to the hood cover on your rig? Great info here. Thanks for the video.
Hi Scott! Here's a link: amzn.to/3zlPHgU
Hey Jason are planning to Re gear Sarge?
If I eventually do 33's I would re-gear, yes. I'm not sure if/when that will happen. Obviously that's a lot of money. But Nitro Gear is actually headquartered not too far from me. So we'll see what happens. BUT... cough cough... a Colorado ZR2 re-gear video may be coming up... COUGH!
@@JasonExplainsThings Looking forward to that Bison re-gear!!
What if you already have a set of Cali Raised ditch lights installed?
They make a little add-on bracket to run a light and antenna on same side. Or you can use a different antenna mount. They also make mounts that attach to the edge of the hood or truck bed.
Question….whats the benefit to wiring to fuse box vs using the cigarette lighter plug?
Also, does the sound come through the car speakers or the unit’s onboard speaker?
The install benefits are self explanatory. The sound can come out of the handset, radio body or both. You can wire an external speaker that they sell as well.
Sorry, but I truly don’t understand the value of wiring vs using the cigarette lighter plug….appreciate the response, nonetheless. Also - just purchased the Midland via your Amazon link….
Thanks! If you want to run it with the cigarette lighter option then by all means just do it that way.
That area you mounted your radio in is kind of flimsy any issues with it supporting the weight of the radio?
No, not at all. It doesn't rattle or vibrate.
I just applied for and paid the $35 for my GMRS license. How do I create my call sign?
They send it to you. 👍
So I can’t create my own? Lame. In the movies you always hear truckers using their own made up name like fast cat, road rager, biscuit eater, etc. I wanted to create my own name.
@@JasonExplainsThings I know it’s Friday, but how long from application to the time I’m approved (typically)?
@@koalafan1576 I got mine in less than 20 minutes. Once you have your FRN, it's pretty quick. Write your FRN down someplace so you can refer to is if you need it - it's not just for radios. There are no "handles" on GMRS, just call letters. It's technically a restricted license and under Federal control - you have to obey the rules - and it's not uncommon for an occasional HAM operator to police the frequencies.
Short Wave Radio (SWR), also known as CB Radio?
Shouldn’t roll up antenna wire can cause interference.
Not true at all. It's not like it's an electromagnet.
much rather have CB radio than gmrs for offroading.
Use whatever your buddies have. 👍
Tacomms.
🤣
You really dont need half of that.