How to Replace Front Lower Control Arms 2013-2020 Ford Fusion 2.0L I4

Поделиться
HTML-код
  • Опубликовано: 10 фев 2025
  • Buy Now!
    New Control Arm with Ball Joint from 1AAuto.com trq.video/ib-1...
    This video shows you how to install new front lower control arms from TRQ on your 2013-2020 Ford Fusion (2.0L I4). Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
    This repair was done on a 2016 Ford Fusion SE 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2013 Ford Fusion
    2014 Ford Fusion
    2015 Ford Fusion
    2016 Ford Fusion
    2017 Ford Fusion
    2018 Ford Fusion
    2019 Ford Fusion
    2020 Ford Fusion
    Tools you will need:
    • Pry Bar trq.video/oajY...
    • 15mm Wrench trq.video/oasM...
    • 18mm Wrench
    • 10mm Socket trq.video/ob6v...
    • 15mm Socket trq.video/ocBe...
    • 18mm Socket
    • 19mm Socket
    • 21mm Socket
    • 32mm Socket trq.video/ofa-...
    • Ratchet trq.video/ocBa...
    • Torque Wrench trq.video/obCD...
    • Gloves trq.video/obRw...
    • Liquid Thread Locker
    • Petroleum Jelly
    • Rust Penetrant
    • Safety Glasses
    • Floor Jack trq.video/oaUT...
    • Hammer
    • Jack Stands trq.video/oaGx...
    • Pole Jack
    • Punch
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 7