One Of A Kind Sliding Barn Doors Built With Homemade Lumber
HTML-код
- Опубликовано: 2 фев 2024
- NEW MERCH! Mr KATO Pocket T Shirt: farmfocused.com/otw-mr-kato-p...
MR Kato Hoodie: farmfocused.com/otw-mr-kato-h...
Send Stickers Here:
Mail Address:
P.O.Box 1209
Kingsport TN 37662
Join the OTW Patreon Tribe: https: / outofthewoods
List of tools commonly used at my sawmill:
Logrite Cant Hook: amzn.to/48qjKEo
Logrite Hookaroon: amzn.to/48pO69Y
Anchorseal: amzn.to/48qKtk3
A Must Have Tape Holster: amzn.to/3LyLmxe
My Fav Measuring Tape: amzn.to/3ZrA4Rk
Moisture Meter: amzn.to/3LAa8xf
Oil Can for ATF Fluid: amzn.to/3Px1Mrn
Level for bed rails: amzn.to/3Zxadr1
Framing Square: amzn.to/3ZrqYnq
Nail Puller: amzn.to/3EO0Aur
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw/
Grease Zerk Metric: amzn.to/44wGaAQ
Grease Zerk Standard: amzn.to/45MC34o
Grease Gun in video: amzn.to/45xHZyy
Get your Anchorseal here: amzn.to/3KZV3EC
Support the channel and buy a T shirt!: farmfocused.com/otw/
Propane Torch Used I use: amzn.to/46YRgAW
Moisture Meter I use : amzn.to/448kbjr
Nail Gun in use: amzn.to/44V1Irb
Puller Used I use: amzn.to/3XI9Dpt
Buy this and thank me later: amzn.to/42jMdHD
Follow me on Facebook profile.php?...
Follow me on Instagram: / outofthewoodsforestry
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw-pocket-tee/
Our Online Store: www.outofthewoodsforestry.com...
If you enjoyed this video consider making a donation to help with production cost of making this free content: www.paypal.com/donate/?hosted...
Save 10% off your first Ariat order - ariat.dkkdet.net/c/3580853/69...
Subscribe to my blog: www.outofthewoodsforestry.com...
Contact Joe Maine for Silver Tip Blades: 229-563-1172
Logrite Log Scales: logrite.com/Item/log-scale
Tractors in video: TYM 574 and 754 T25
tym.world/en-us/
Channel Partners:
Woodmizer: www.woodmizer.com
TYM Tractors: tym.world
KATO: katoces.com
Log Rite: logrite.com
Blue Creeper: logrite.com/Category/bluecreeper
Rite Leg Company: ritelegco.com
Nyle dry kilns www.nyle.com/kiln-drying-syst...
Outback Wrap used on hoses in video: amzn.to/3LjNWFT
Check out the new blog post: www.outofthewoodsforestry.com...
Get your leather tape holster here: amzn.to/3y0LqxP
Join the OTW Patreon Tribe: / outofthewoods
Get your Anchorseal here: amzn.to/3mQL3lD
Sawmill Used: Wood-Mizer LT70 Super Wide
www.woodmizer.com
Mail Address:
P.O.Box 1209
Kingsport TN 37662
Follow me on Instagram: / outofthewoodsforestry
Video Tip Jar Paypal: outofthewoodsforestry@gmail.com
* Amazon Sawmill Store: www.amazon.com/shop/outofthew...
Business Inquiries: outofthewoodsforestry@gmail.com
Follow OTW on Social Media
Instagram: / outofthewoodsforestry
www.outofthewoodsforestry.com 
Хобби
Metal cutter used in video: amzn.to/3Oun359
wide chicken wire, cut in a rectangle leaving an inch above and below so the chunks get out. Add an owl sculpture they use on boats.
A friend makes a carpenter bee trap. May send you one to try. He lives in Georgia and has the same problem. Take care
Looks good to me myself and i......Thanks Nathan 👍
Old nasty Shoe🇺🇸
Put a 90 degree elbow on the discharge and extend it downward 6 to 8 feet.
I was going to totally suggest this idea. 100% agree.
Keeping birds out, you could put a hinged flap. Opens when the air comes through, closes with gravity or a small spring.
I agree
That was going to be my solution, too.
I tried that years ago. The birds fly in place, lift the flap, and go in in tube. Smart little animals.
Yes, like a dryer vent flap
It’s still a deterrent. But if Nathan is using it pretty regularly, it might not be an issue (or become one).
Hello, put a flap on your exhaust. When it's off uts closed, when running it will swing open. Just like a tractor exhaust stack only horizontal.
Great videos!!!
I was thinking the same thing
Just had the same thought... :)
After seeing a million of the same flapper ideas, I changed my mind... get a sign that says, "Stay out. "... that should do it! Lol!!
Nathan: The main reason I watch your videos, aside from your skills as a sawyer, is that you are a good communicator, and that is why I watch Richard a Smoky Mountain OutPost, Evan at Country View Acres Al at Lumnah Acres and Sam at Green Acres, because all these people are GOOD talkers. You all tell what you are doing, why you are doing in a fluid manner with out gaps in the story line, and when there are gaps, you say why.
Keep doing what you are doing! I"m a retired Journeyman Lithographer and I took pride in my work, and I can see that you do too!
Thanks
I appreciate you sharing that. Means a lot.
I talk to Richard often. Top notch
I really like your videos. I like to say you are "Jack of all trades". That's is one of the reasons I like your videos.
In regards to your dust blower stack, put a 90°elbow on it then face it down with a 2 ft. Pipe on it,the bird can't fly up it! Z Phoenix AZ 🌵
Looks good Nathan. A long down tube on that pipe may keep the birds from flying up in there. The wood chips will probably keep the bees this summer
Suggestion Nathan, for the bird nest problem, just mount one of those owl protectors to the wall near the dust exhaust.
Turn that elbow down and put another piece of pipe on it so they have to hover to fly up the pipe and you can get a Hawk decoy to put on top of it. Turning it down with a longer piece of pipe should do it! Hope it helps and good luck!
Screw a plastic owl above the outlet pipe … someone also said put a flapper on it. That is also a very good idea.
Agree with the flapper.
Either will probably work. I had a similar situation. Birds were nesting in my sawmill. Put a plastic owl near mill on wall, haven't had anymore problems. Flapper wouldn't have work in this case.
I think the owl idea will work a buddy of mine uses one to keep the birds from flying in his garage and never happened after he put it in it's place
@@jeffhuffman5433
Awesome I have done it on a few locations on my property where I didn’t want certain animals and the owls work great for me I even have an Owl by my chickens and it works there too
How about using a sort of "windsock" type device. It will allow the wood chips to be blown out, BUT when not in use, it will hang limply.
Birds will not try to fly UP the wind sock into the exhaust pipe.
You could put a dryer vent cover on the saw dust pipe that way when it runs the air flow will open it and when it’s not running it stays closed. 👍🏼
A 90 degree bend and a 12 inch pipe straight down, that keeps the birds out, they don't like flying up inside a pipe.
2 -45* bends should off less obstruction to flying debris than 1-90* bend plus add the 12 to 24-inch pipe to the end turned down. Do not put anything in the pipe as a restriction, it will catch stuff and eventually clog up.
A cotton cloth flap, such as an old dish towel or t-shirt with multiple slits so the material flaps open to allow sawdust to come out but blocks the birds from entering
Use that tin snipper and make the shape of a large bird and hang it like a sign on the building.
You might try putting a burlap sack around your dust extractor exhaust with the end cut out. That would make it harder for the birds to fly up and into it.
Hey Nathan. I was going to say like the other gentleman put a cover over your tube would like a one-way door on it. Just like when you see on the dryer vent when the dryer comes on the flapper opens when the dryer goes off it closes. I would look into that for your ductwork
👍 install a hinged flap to keep the birds out.
Fantastic episode as usual, install a frog flap on the dust extractor outlet, at least that is what they are called un Australia. Glad I am not the only one to finish a project at night😂😂
Hmm here's a thought Nathan, make an end for your exhaust pipe with 1/8" diameter wire that is spaced 3/4" apart (depending of course on what type of bird likes to nest in there), all the wire should be parallel. If the attachment is made out of ABS or PVC pipe it can be rotated so that the wire is either vertical or horizontal, it may be adjusted to find out which orientation works better at not trapping dust. No moving parts, and I find that the flap on my dryer vent always catches dust and lint up at the hinge which eventually needs to be cleaned. Great video thumbs up.
You need to get a dryer vent cover for your sawdust exit that has a swinging flap that is designed to keep out varmints & birds.
Most of the people here have given you the best answer, ie: extend the existing pipe with a 6 to 12 inch straight pipe, then another 45 degree bend which point the opening towards the ground. Then connect another 2 to 3 foot straight pipe which will then allow you to place your blue Logrite dump trailer or another one, under the pipe to collect the shavings. There may need to be a 1 or 2 foot gap between the end of the exhaust pipe and the top of the trailer to stop back pressure from the exhausted air blowing the shaving in and out of the trailer. This would fix two problems you have at the same time. Good luck and enjoy your videos.
No better feeling then getting things done
Liking the new music.
Your doors turned out beautifully.
Hang a canvas sock on the dust collector pipe,it will hang straight down and the birds can't fly in.
Nathan you’re doing a fantastic job. Those doors look great!👍❤️
I like that corny little intro of yours, the barn door and lowering the camera. Golden.
To keep birds out, turn discharge elbow 90 degrees down with a small extension. Birds can not "hover" vertically in a tube.
Put an owl statue near the exhaust vent to scare the other birds away.
I agree with all who have suggested a flap. Similar to a dryer vent, open when dust collector running, closed when off.
Nice job on the sliding door Nathan…enjoyed watching you complete that project
Two solutions…
Install a bag or metal catchment box made from aluminum onto the pipe that can easily be removed with a squeeze type clamp… then you could just discard it as it filled up…
Another simple option would be to point the pipe in a more downward direction, making it much harder for them to easily fly in, and made add a couple of vertical wires inside the pipe.
For the bird problem I would cut a flap out of some your left over metal siding and attach it to the top with small hinge. Should act like a tractor exhaust flap.
Looks good Nathan, coming along well with the side chores around there. Stay safe and keep up the good work and videos. Fred.
My thoughts on the bird issue: some sort of metal tines that point out. That stuff they put on statues and tops of signs to keep birds off, just angled pointing outward. That way, they will not impede anything being blown out, but prevent a bird from trying to push in.
Add a vent damper, like what’s used in hot air furnaces or boiler vents. Probably have them at HD or your local plumbing supply store, and they might even stock the exact size for your dust collector exhaust pipe.
Put a dryer vent cover on it with a flap. Running it open and off it closes
You may try to put a predatory bird figure, either perched on the pipe or mounted on the roof, near the outlet.
Your Lowe’s has a funny orange sign, Nathan. Must be a regional variation 😂
The mesh for stopping birds going down your chimney
put a light weight flapper over the end of the pipe. When the exhaust is not running, the flapper should close, but when the exhaust is running, then the flapper should blow open, and the sawdust and chips, should be able to exit. just a thought
If you covered the vac outlet with a hinged lid it could swing out in operation and a spring could pull it closed when idle, keeping the critters out.
great job Nathan. Love your informative videos.. Also, love the music that plays about 6:35 into the video. Great music! I have really enjoyed watching your videos and am going back into the archives and watching those that were here before I was. Thanks for bringing me along!
Put a rain cap on it, like they use on construction equipment.
How about a 90 pointing down with a straight piece going into a builders sand bag. If you got 2 bags it’ll be easy for removal with forks & replace with new bag for collection. Keeps the area tidy too.
I know a guy that has a fancy wood splitter for your firewood, so you don't have to split them into kindling by hand ;-) Doors came out nice Nathan. Keeping the birds out, that'll be a challenge. A flap of some kind, maybe automate it mechanically?
Moth crystals around the opening of the pipe will work too.
for your bird problem I would suggest a flap like on a dozer exhaust the air pressure from the fan would open when in use and it would close when not
They make flapper valves for bathroom exhaust. Solved a bird problem I had.
Put a one way flapper valve on your pipe. The blower will open it to blow the sawdust out and close when turned off so the birds can't get in.
Now those are nice doors! I like the colors, looks like a rural barn oh wait it is a rural barn! John Toccoa GA
Thanks 👍
for the bird nest issue how about some thin plastic that will cover the hole flat when you are not using the collector and when it's on the air and chips push the plastic away from the discharge hole
Put a Flap door on it, opens when on closes when off, gravity should take care of closing it! John
to mix small amounts of epoxy, I use old credit cards, or old business cards, and then toss them out after the epoxy is applied, and you can use an old credit card as a disposable trowel.
Fix the bird problem with a vertical hanging damper on the duct. One that is closed when the system isn't running, but opens when it is.
Re Bird problem put a spring loaded flapper on end of pipe - keep birds out but blower will open for sawdust- Tyler
G'day Nathan, I have been erecting sheds for 30 years and the screws for that cladding should be beside the Ridge
As previously said by another person you could like a big tractor exhaust flap or maybe chicken wire. The bird building the nest is probably a Starling. They nest in holes and indoor spots out of the weather. I actually had a problem a few years ago with them in the eves of my house. I've even seen them go into a dryer vent with a plastic guard on it on the outside of a house. And if they nest there one year in which they raise two broods they will do the> darndest to nest there in the future.
Doors came out perfect! Ray
Hinged flap. I know someone else has mentioned it also. When the strong air goes out the flap opens. When it's shut off, the flap closes.
A flap would work as other have suggested...other option would be to extend the pipe vertically downwards about 2ft...birds wouldn't be able to get up inside it then..and your chipping would form a nicer pile on the floor. Loving the doors.
I would install a blast gate on the end of the pipe to solve the bird problem
try a dryer flapper. It should keep birds out and will open when air flow starts to let chips out.
Hello from South Arkansas. I really enjoy your videos. I’ve ran sawmills in the past and cut firewood to heat my previous home for over 20 years . on your dust collector exhaust I would try a spring loaded flap like on a clothes dryer. Keep up the good work.
Put a rubber snake in the end of the pipe or an owl decoy. Either one might help
Try a fluttervalve. It will close when the vacuum is off, and open when it is blowing on.
Nathan your videos are just inspirational. You seem to have the ability to turn your hand just about any job, I really envy that, in a good way!
You could direct the output into a large barrel instead of just out like you have it. We had a similar issue with the house and birds getting into the attic and building nests and yes, a screen solved that issue. Nice doors by the way and I like what you have done with the place.
Nathan, what a great Video, you are such an an Artist with your woodworking, great job.
Thank you so much 😀
Have you considered mounting an owl decoy on top of the dust collector shoot outside ? I think that will discourage any nesting birds from choosing that location to start a family.
Mount one of those owls or hawks on a perch fixed to the side of the barn close to the pipe.
You did another good job you think it’s bad to have that rain here two or three days you oughta be up here in Maine where I live we got about 2 feet of snow on the ground and winter is not over. Keep up the good work. God bless.
McMaster Carr makes exhaust pipe caps of various pipe sizes. hey are weighted flapper valves that open under slight positive air flow. Otherwise, they are held closed by gravity (which never fails). They're not very expensive, but must be oriented just right so the work.
Nathan a louvered dryer vent flap works great. Been using that for years on my dust collector exhaust.
On the exhaust duct for dust collection: Self opening/closing louvers should deter birds etc. also if you point the discharge down about 18" birds will not be as attracted to the opening for nest building.
Hey Nathan, just run the blower every day or two. Eventually they will get the message and find a new home. I have a similar problem with birds making a nest under the eves on top of the gutter drain pipe. I just hose them off every few days during nesting season.l
Put a piece of flexi hose on it!
Maybe try a chain curtain or even plastic. That will blow open when you are using the blower and look like it is solid to a bird.
Try useing a dryer vent cap or something like that with a flapper type door on it.
Plastic Dryer hose cover which has larger holes and used to keep birds from nesting. Might work. Problem we have had in past.
90 degree elbow and a 2ft pipe fitted vertical. Or put a flapper on it like an exhaust pipe has 👍
Another killer vid Mr. E! Oh man o man the tunes!! That fire looks soooooo good!
Try a windsock to stop the birds
Two things to keep the birds out. Make that a 90 facing down, and put chicken wire or rabbit wire over it.
Spring secured end cap that the spring is strong enough to keep closed and weak enough to be overcome by the force of the wind being blown by the dust collector. Somewhat like the flapper on top of a semi exhaust stack. Maybe???
Put a flap end so it is closed when not in use, but opens with air flow
A drier vent door might possibly work for your dust collector
Nice early release Saturday morning Coffee enjoying some fine craftsmanship at work. Definitely the 3/4-1” galvanized square screen over the dust exhaust will deter winged friends.
Thanks for the early release 🙌 planning my day of driving my Daisy around town and enjoying another awesome and relaxing blessed day
Put 1/2 or 3/4 square wire fencing over end
Can use a fabric sleeve hung off of your pipe. It will open with little effort and then close.
Put an owl decoy on it to keep birds out.
See if you can fine a louvered vent like what is on a dryer vent hose. The louvers are closed until the dryer comes on, then they open up.
MM77 Approved 👍🏻👍🏻
Some good suggestions for the bird problem. I wish you were located in central Tennessee instead of the Northeast corner. It would make for a shorter trip for me. But I got to admit that you have a nice place where you're located.
Put some kind of a sock on the end that hangs down but still open on the end.
A dryer vent style end cap.
Put you a spring loaded damper door on the end of your pipe where it will open whenever you turn your dust collection on.
Sorry I didn't realize other people had already commented that
Put those bird spikes around it facing out so they would be able to land on it and get in there.