Otro muy buen ejemplo de su trabajo, excelente fabricacion de esta Power Bank de 45000 mAh con una caja plastica reciclada, saludos y mis respetos desde Venezuela.
i have 1 with 6 18650 with 2000mAh each and it takes like a day or two to charge fully from 0%. The idea is just conect it when you disconect your phone and use that time to charge it. Its usually more the time you have your phone unplugged than plugged so in average you will never run out of charge on the power bank. Mine with 6 cells lasts 4 whole days with my cellphone watching videos and all, so i guess this one with a bit more than twice would last like the whole week, maybe just shy of two.
There's a solution: You can access the battery cells directly and connect a DC step down converter capable of delivering some 10 amperes to the whole bank. The DC step down should be adjusted previously to 4.2 volts at maximum, and a constant current no more than each battery can charge at around 300 to 500mA for safety. Always monitor heat and cells voltage. When the powerbank achieve 4.2 volts, stop the charge. If your buck converter ( step down ) has some led to indicate that the current, or you insert those voltimeters/amperimeter before the powerbank, you can constantly monitor the bank voltage and current. Remember that when using a step down converter, the input voltage should be always above the output, and this particular step down should handle easily some 10 amps for delivering 300mA for each battery. Add safety measures when handling with these batteries. These kind of projects should be made only by people with great experience in electronics and knowing the catastrophic dangers of even a short circuit on a powerbank.
One of first real sized home made power banks xt60/90 scooket for 4 hour recharge timing may be needed some it can be done on quick ideal it would if carried 2nd it own high-speed circuit so either charged wall outlet or solar input Top job
This is an interesting piece. That battery would probably take a long time to charge to 100% .This would make a great hiking power source for all your USB chargeable stuff. Looking forward to building a similar power bank too for my channel. Good batteries are very expensive to ship
I was trying to read the info on the box he received them in, but couldn't make much sense of it. Would also like to know where he gets those batteries!
Salvaged from a battery bank, looks like, or is that white plastic part of the packaging for transportation? I don't think so, also when he was welding the cells, there was already dots. I also try to grab all kind of batteries that contain 18650 cells, most of them wear out only like 1/3 of the cells while the others are still fine, laptop batteries are easiest to get, you can actually go back to even Pentium 3 laptops, I made a powerbank from cells from such an old battery, five cells can load my iPhone 6 ca. 2.5 times from 20 to 100%, I actually still didn't go deeper about all that stuff, but I think it's pretty good, like two cells load the battery one time, comparing the volume of the iPhone battery and two 18650 cells, it feels like they are still fine.
excelente carga para toda la semana o mas ya solo es tapar los agujeros y pintarle un diseño mamalon haha este canal tiene muchos proyectos muy bueno y fáciles de hacer.
The difference between a hoarder and a collector is exactly what you see here. Using what you have and recognizing potential where others don't. That and actually organizing
Молодец, твои ролики интересные и познавательные) Собрал аккум под фонарь на 12,6в с платой BMS. 3S4P. 10000mAh при заряде, ещё на разряд ёмкость не тестировал.
This guy's garage has more stuff than a junkyard
I love your creatively tbh
Electronics are way cheaper in China❗😂😂😂😂
@@p.k.953 this is not china btw...
@@p.k.953 he is not Chinese
Your soldering moment is satisfying me...
really amazing..i really liked the display that is in speedometer shape... its a killer
Creative channel walks into a craft store, I'll have one of everything
Otro muy buen ejemplo de su trabajo, excelente fabricacion de esta Power Bank de 45000 mAh con una caja plastica reciclada, saludos y mis respetos desde Venezuela.
You just have to buy a 3 d printer it works good for you helpfull
Dear Creative Channel i am your big Fan from nepal I watched your vedio in everyday.
And please step tour on your lab your garage please🙏🙏
When life gives 💯 reason to cry then show your life you have 1000 reason to smile
You are awesome bro. I think it would be great if put the name of the components you are using. So that it would be more easier.
whatever tools you need, you have it
i wish i have tools like you
Precision work on the assembly, 👍🏻skillful & useful.
It's a suitable name for your channel brother
Love for Bangladesh💗💗💜💜💞💕💕💖💞💜💗💘💝💚💛
Hello friend, can you put the link to buy the batteries?
Pls hybrid part 2
cool, useful vidos. Greetings from Ukraine.
Sir I am your very big fan
i just made a similar one with 13 cells yesterday
what a coincidence!!🌎
VERY VERY GOOD AND FANTASTIC BEAUTIFUL GOOD THANKS 👍🆗🤗
Super powerful power bank ♻️♻️♻️ recycling
I interested your power bank, did you sold?
What the very nice englis speak you..
I interested your language, did you learn ?
@@kevalahir5160 😂stopppp, this is very meannnn
🤣🤣🤣🤣🤣🤣🤣
I just interested his powerbank bah, and wanted to know he got sale the powerbank or not
Hello very good project have you link for our module usb?
It take 45 h to full charge this powerbank🤔
You should make 3s or 4s battery pack with bms for charging your battery
Don’t think you would ever charge this power bank to 100%
Maybe wrong though ?
May take 45 hours to charge.
i have 1 with 6 18650 with 2000mAh each and it takes like a day or two to charge fully from 0%. The idea is just conect it when you disconect your phone and use that time to charge it. Its usually more the time you have your phone unplugged than plugged so in average you will never run out of charge on the power bank. Mine with 6 cells lasts 4 whole days with my cellphone watching videos and all, so i guess this one with a bit more than twice would last like the whole week, maybe just shy of two.
Good question
There's a solution: You can access the battery cells directly and connect a DC step down converter capable of delivering some 10 amperes to the whole bank. The DC step down should be adjusted previously to 4.2 volts at maximum, and a constant current no more than each battery can charge at around 300 to 500mA for safety. Always monitor heat and cells voltage. When the powerbank achieve 4.2 volts, stop the charge. If your buck converter ( step down ) has some led to indicate that the current, or you insert those voltimeters/amperimeter before the powerbank, you can constantly monitor the bank voltage and current. Remember that when using a step down converter, the input voltage should be always above the output, and this particular step down should handle easily some 10 amps for delivering 300mA for each battery. Add safety measures when handling with these batteries. These kind of projects should be made only by people with great experience in electronics and knowing the catastrophic dangers of even a short circuit on a powerbank.
Waiting for......Mini jeep part 2
please........
You can follow an amazing and entertaining channel🌹👇🌹
#funml
Good to see a back to basics video good work
Excellent
Grateful idea sir
I also want to make but I don't have battery 😭😭
Creative Channel make a nice Creative 👌
Shut the front door! You can speak?!?! OMG. Keep up the good work!
Gap yoq
Lmao right?! I’ve been watching this dude for years and he’s never said a word
One of first real sized home made power banks xt60/90 scooket for 4 hour recharge timing may be needed some it can be done on quick ideal it would if carried 2nd it own high-speed circuit so either charged wall outlet or solar input
Top job
А как же с балансировкой каждой ячейки? Время заряда такого акб от 10А 4.5 часа минимум. Но большой ток без баланса убьет этот каб!(((!!!
автомобильный зарадки пользуйся кто тебе не довал
@@ZakharLive2024 Ну попробуй заряди подобную сборку автомобильной зарядкой! только обязательно дома заряжай!!!
This is a bomb 😂😂😂
Actually yes
With no BMS + used batteries + no check-up concerning capacity yeah, a fire bomb
😂😂😂😂😂
@@JV_12349 On the PCB there's a BMS for charging. When batteries achieve 4.2 volts, BMS cuts off charging.
Where did you get that circuit board charger cool looking screen
where to get the dyson lipo cells?
I have no words to say about him.
Someone will die
I need one of those PCB, to replace in my power bank. And here in Brazil, only order from China and wait 2 months.😢
Great video, i have the same cells from dyson
Can I run a laptop off the battery directly? How long will it run? Streaming video?
You can follow an amazing and entertaining channel🌹👇🌹
#funml
Do it have a battery protection
Please tell me where to buy the power bank board that you have used and give the purchase link.
This is an interesting piece. That battery would probably take a long time to charge to 100% .This would make a great hiking power source for all your USB chargeable stuff.
Looking forward to building a similar power bank too for my channel. Good batteries are very expensive to ship
Nice power bank 😯👍👍👍
Thank you very much 😁😁😎😍
Peace ✌😎
جميل جداً ورائع احسنت النشر😍😍😍
my question is how long of time you need to charge this project ? thanks
All the best
Good job brother 👌👌👌
Where did you get all those Dyson replacement batteries that cost a fortune?
I was trying to read the info on the box he received them in, but couldn't make much sense of it. Would also like to know where he gets those batteries!
Salvaged from a battery bank, looks like, or is that white plastic part of the packaging for transportation? I don't think so, also when he was welding the cells, there was already dots. I also try to grab all kind of batteries that contain 18650 cells, most of them wear out only like 1/3 of the cells while the others are still fine, laptop batteries are easiest to get, you can actually go back to even Pentium 3 laptops, I made a powerbank from cells from such an old battery, five cells can load my iPhone 6 ca. 2.5 times from 20 to 100%, I actually still didn't go deeper about all that stuff, but I think it's pretty good, like two cells load the battery one time, comparing the volume of the iPhone battery and two 18650 cells, it feels like they are still fine.
Iam waiting for next video because of you videos so satisfy relax of maind
please tell me the name of this load component, I really like your videos, you are a beast
Awesome
you are the best .
Best Exprimant Sir Good 👌🤓 😲💖
👍🤝🙏
Your small garage contain all equipment & tools in this planet..
i like your video
where I bought the display that you used that I would also like to buy it if you give me the link
Awesome 👍and i know how you gathered those batteries. lol
excelente carga para toda la semana o mas ya solo es tapar los agujeros y pintarle un diseño mamalon haha
este canal tiene muchos proyectos muy bueno y fáciles de hacer.
Great to put your hands on stuff that you need to do your stuff on RUclips have u got a shop
Soooper sir waiting for mini jeep part 2
sir do you still have that 18650 holder?
Mantap bro.. Hadir dari denpasar barat indonesia bali bro 😃😴
Akhirnya saya menemukan komentar dalam bahasa indonesia :v
@@muhamadramdani9773 wkwkwkwk
Great job 👍
1:45
This sound is very legend😂
Hope you are safe where you are
Nice 👍🏻👍🏻 🇮🇳 || Kuki 01|06|2022
Waiting for part 2 mini jeep
I also waiting for the part 2
What is the powerbank module he is using? Can anyone tell me?
Where did you get the power bank module from
I was see all your video of 3 years
I wounder every time where the links of the products are gone how we make it 🤔
Please provide links to purchase the raw materials for making DIY thing's that you make
You can follow an amazing and entertaining channel🌹👇🌹
#funml
You make a one electric car please 😇😇😇
Mini Jeep hibrit please!!!!
Super
Where did you buy the batteries?
Wow that's a lot of batteries
Ye dc motor kha se ma Pakistan se ho
WTF... creative channel
Very very thank you
I wanna purchase these creations
Nicee project
hello bro, I want to ask you where to buy a power bank module and battery?
link for the power bank module please... thank you
The difference between a hoarder and a collector is exactly what you see here. Using what you have and recognizing potential where others don't. That and actually organizing
Молодец, твои ролики интересные и познавательные)
Собрал аккум под фонарь на 12,6в с платой BMS. 3S4P. 10000mAh при заряде, ещё на разряд ёмкость не тестировал.
Bro I no that the hibred jeeb is in Blue colour 👍👍
Make a power full bicycle headlight
You can follow an amazing and entertaining channel🌹👇🌹
#funml
Hi, where do you buy the li ion batteries? I could put a lick thanks
Hi bro nice
what is modul?
U R The Best
where do you buy used battery cells?
Good job! 💚
Nice
Doctor: You have 11 minutes and 17 seconds to live.
Me:Opens Channel Creative
Make a large catamaran RC boat with dual motors🙏🙏
اول تعليق ابن العراق 🤘😎
Привет друг! Лайк за станок для точечной пайки! Сам собирал или купил?
Charging board name please, where i can buy it ??.. realy need it
Which power bank circuit is good for Power bank?