Clean and simple. Minimum of tools necessary. Easy to figure out dimensions for myself. I would countersink the hinges and maybe add a nylon pad and handles.
Props to those who don't use jigs, I know I need one. I'm very good with my hands but getting good symmetry on the belt sander isn't as easy as the pro make it look. This is a great diy jig, I wanted to make a new one and and seeing how well yours came out I'll have to make one similar 👍
Fully agree the best I have found on RUclips. Would be great if you have a description with sizes and a kind of drawing. I am just a beginner and don't have much tools. Thanks for sharing. Cheers from the Netherlands. Hope you provide all the viewers with a description and drawing
Christopher Reedy that is a fancy jig. it is ferrari of jigs. all you need is a L shape and two nuts and bolts on one side to set the angel. this was very nice but i never spend time to make this. L shape and two bolts will do.
плавной регулировки изменения угла нет!а это уменьшает свободу действий на приспособе!!! обязательно делайте с винтом и контр гайкой!!! за изделие и работу ,респект!!!
Один из не многих, кто пользуется нормально заточеными сверлами. Душа прям радуется, а то смотришь тупое сверло, масло льют чтобы не свистело... красавчик👍
Love the design...and easy to put together with minimal specialty tools. Nothing worse than looking at a how to video and its starts off. Lets head to my metal fabrication shop. LOL
What a great job! I would like to be able to replicate it. By any chance would you have a plan with the measurements and distances of the set or could you provide me with them? From already thank you very much. Greetings from Argentina!.
I am very much estatic to get started in this trade and make my own blades one day and this is gonna save me so much time n ensure my products are what I want to look like. That being said, i am not well enough to have a big proper drill like this. Can an impact driver achieve the same job at getting through the steel block with the right bit n oil?
Excellent piece of work.. great job.. but the instructions are lacking. Measurements,aluminum sizes and distance for holes drilled. A good fab guy can figure it iut but novice knife makers with little fab skills would have trouble
Seeing as how that was aluminum plate you were tapping.....you could have put your tap in the drill and run it on slow speed. I have done it plenty of times.
Wish I watched this earlier, would made the build of mine less try and error ...but in the end it looks very similar to urs.....I just added a horizontal screw to adjust the bevel more reproductable.... Ur using cubitron 2 grinding belt? I love this belt, grinds so well and makes such an beautiful grindig Face..
![TROLLSKY'S BUDGET GRINDING JIG [Trollsky Knifemaking]](/img/1.gif)
Best Jig design I have ever seen. As well as best tutorial. Detailed and straight to the point
Very nice! Probably the cleanest diy jig I’ve seen. Fact that it can be easily made with simple tools makes it that much better. Outstanding!
This is by far the BEST design and build for this style jig ive seen. Thank you for sharing.
Best design and execution I've seen for a knife-making jig. Great work.
This is by far one of the best bevel jigs I've ever seen. Definitely going to make it!
Finally a design that doesn’t require welding!! Thank you
Man up! Learn to weld...
Cody Daniel It is really handy to know how to do!
This is definitely on my project list. Right after I finish refurbishing my lathe so I can build myself a 2x72 belt grinder...
Beautiful job on bevel device.
No music: Thank You.
No talk: Thank You
Great video.
Thank you for sharing your expertise. 👍👍👍
Всё просто и красиво😊только при сверлении держать заготовку пальцами не серьёзно,можно и травму получить,берегите руки,они у вас золотые👍👍👍
Clean and simple. Minimum of tools necessary. Easy to figure out dimensions for myself. I would countersink the hinges and maybe add a nylon pad and handles.
Props to those who don't use jigs, I know I need one. I'm very good with my hands but getting good symmetry on the belt sander isn't as easy as the pro make it look. This is a great diy jig, I wanted to make a new one and and seeing how well yours came out I'll have to make one similar 👍
Fully agree the best I have found on RUclips. Would be great if you have a description with sizes and a kind of drawing. I am just a beginner and don't have much tools. Thanks for sharing. Cheers from the Netherlands. Hope you provide all the viewers with a description and drawing
Love this build. Made my own today and it works great. Thanks for posting!!
Finally a video showing a jig used to make a small blade, Scandinavian grind! Brilliant (and no welding!!!)
Excellent! The only change I would make is to countersink the holes in the hinges to make the screws flush. Thanks for the vid.
You never cease to amaze me with your great ideas! You a big help to beginners.
This is awesome! More sophisticated than the one I’ve been using for sure! Solid
Pretty badass. I might steal this. I’ll probably build in the clamp, and countersink the hinges also.
This was a good video, but if you could make a set of instructions with sizes and ect... it would be perfect.
Christopher Reedy that is a fancy jig. it is ferrari of jigs. all you need is a L shape and two nuts and bolts on one side to set the angel. this was very nice but i never spend time to make this. L shape and two bolts will do.
@@ravanabrahmarakshas4263 The amount of time and effort you put into projects will be reflected in the quality of your knives.
I think 100x250mm is a good measure for one plate
Very good idea, also nice that it is aliminium. Very clean and uncluttered, easy to handle. Very nice work
Do you have plans with dimensions? I really like this style of jig.
плавной регулировки изменения угла нет!а это уменьшает свободу действий на приспособе!!! обязательно делайте с винтом и контр гайкой!!! за изделие и работу ,респект!!!
Very good Idea.
Simple style , easy to make , nice look , perfekt Funktion.
THANKS FOR THAT VIDEO.
Один из не многих, кто пользуется нормально заточеными сверлами. Душа прям радуется, а то смотришь тупое сверло, масло льют чтобы не свистело... красавчик👍
....интересный и доведенный до ума вариант,спасибо за видео...
This is the best I've seen on RUclips. Thanks man for you masterpiece!!!
Love the design...and easy to put together with minimal specialty tools. Nothing worse than looking at a how to video and its starts off. Lets head to my metal fabrication shop. LOL
It seems like making the jig was just as much fun as making the knife.
Thanks foto they vídeo.
Great idea....
Grettings from Puebla México!!!!!
Nice build!!! Thanks for the video
Excellent. Simple but elegant design.
Simple and effective, well done man that’s awesome
Great design I would affix a hard nylon pad to the base and countersink the screws
Great design! Thanks for sharing!
The very best one I have seen!
Thank you for sharing valuable vdo.Small job ,But great benefit.
💖💖💖👍👍👍💖💖
What a great job! I would like to be able to replicate it. By any chance would you have a plan with the measurements and distances of the set or could you provide me with them? From already thank you very much. Greetings from Argentina!.
Well done, excellent job
You have endless skills.
I am very much estatic to get started in this trade and make my own blades one day and this is gonna save me so much time n ensure my products are what I want to look like. That being said, i am not well enough to have a big proper drill like this. Can an impact driver achieve the same job at getting through the steel block with the right bit n oil?
Ahora sí! El primer fresado de valió de nada.
Very nicely done! I'll buy it! Lol
Fantastic Neat work.
Thanks!
Very good work!
Can you tell all sizes of this beautiful product?
Simpel,easy and supercool.
A little bit Alu,some screws a little bit Time wow.
Grind perfect Knives
Top Work.
Make it out of steel and weld it, last longer and will not take very long to make.
Will wood be a suitable replacement? I don't exactly have scraps metal lying around
Add instructions and specific materials in the narrative. Great video!
Great! I made all of this just using a file. Still turned out great.
Nice👍
Hella dope, AVmake!
best so far! nice job
very nice, i use a similar jig but yours is much nicer... thanks
Nice work sir 👍
Excellent piece of work.. great job.. but the instructions are lacking. Measurements,aluminum sizes and distance for holes drilled. A good fab guy can figure it iut but novice knife makers with little fab skills would have trouble
Nice job! Well thought out.
Всё гениальное, просто. Спасибо.
Very nice work! Great job!
Un buen trabajo felicitaciones 👍
how many mm aluminum?
That sure is a nice jig
Does a great job beveling but sure is a lot of work making. But a damn good job of fabrication
Very nice :) when you sink a hole lower your speed for nicer surfaces and less sound
Great video. Thank you for sharing with us. Can you create video or post drawings for this jig. Thank you
You have opened my eyes!
Great video! You did good work!
Do you think I could have your specs so I could create my own?
Would you kindly tell me more about a thickness and size of aluminium pieces?
Bonsoir ! WAAAOOUUU ! PERFECT very good job for knyfes !
Muy buen trabajo !!!
Nice design of the bevel holder. I LIKE IT. What belt grinder you are using ? I mean is it home made or bought from the store ?
Could you please Provide dimensions on everything? I definitely want to make one of these for my knife making.
You can create a drawing with dimensions. This thing
That's a real nice job , what type of bandsaw are you using if you don't mind me asking
Thanks for the demonstration
What is the right bevel for the knives....?
I know it determines on the size of the blade but for an average size.
Thank you
Useful , thanks a lot
Seeing as how that was aluminum plate you were tapping.....you could have put your tap in the drill and run it on slow speed. I have done it plenty of times.
Looks good, I’m going to give it a try. What kind of sander do you have?
Why did you bevel the screw holes for the hinge screws?
When does the kit come out for sale?
Yes, sell these, AV. I want one.
Wish I watched this earlier, would made the build of mine less try and error ...but in the end it looks very similar to urs.....I just added a horizontal screw to adjust the bevel more reproductable....
Ur using cubitron 2 grinding belt? I love this belt, grinds so well and makes such an beautiful grindig Face..
Next time use Self tappers screws
Maravilha. Ficou perfeito. Parabéns. 👍👍👍👍👍
Неплохо получилось 👏🤝👍!
I love your videos and everything you make. Please don’t stop making the awesome videos. How much would you want for one? I’d totally buy one.
Thank you very much!
I don't plan on selling these,at least for now.
AVmake I totally understand. If you change your mind, please let me know.
AVmake I’d buy one too!
Ficou muito boa parabéns 👏👏👏🇧🇷
iI enjoy your video, i definitly will try to do this artefact.
Wo hastn die Aluplatten gekauft?
Hell yeah good job
Всё гениальное просто.
GREAT!!! i'll make it!!
Bonsoir ou ...bonjour ! SUPERBE TRAVAIL qui m ' aide VRAIMENT MERCI a vous ++ et MERCI RUclips !
Perfect job
Cool
Just a suggestion, show how it's used first, not last. Merry Christmas! BobUK
How about showing switching sides??
Wow very nice
You are increadible
Ну почему наши «блогеры» не учатся-ни одного слова и всё всем понятно? И никаких «суперов»!?
Посмотрите канал "Позитивная парочка".
Great video, thanks for sharing. Nice jig also...
Good 👍
Where's the best place to buy aluminum to make this?