The “TUNE UP” is DEAD! Dual Spark HEMI! (Injecting liquid into the Intake)
HTML-код
- Опубликовано: 6 апр 2024
- How to do a tune up on a HEMI 5.7 in a Ram 1500 4x4. This same engine can be found in several different cars and trucks. We will be removing all sixteen spark plugs from this v8 engine. This is known as a dual spark ignition system. We will replace all of the spark plugs and then manually clean the throttle body. Afterwards a pressure vessel will be filled with an intake, valve and top cylinder cleaner. When the cleaning product is then processed through the engine, the spark plugs will be removed for a second time in order to use borescope to visually inspect the pistons in order to determine the effectiveness of the cleaner on an engine with carbon buildup.
Check out our Ray's Auto Clinic Merch HERE: EVERYTHING is a HAMMER! www.RainmanRaysRepairs.com
Wife Unit unveils our custom tumblers and mugs • New Custom Insulated T... also found at www.RainmanRaysRepairs.com
Interested in Banks Power Performance Products? Visit Banks Power HERE!
**** www.bankspower.com/RAY *********
Take care of your car or truck with premium synthetic Amsoil Engine Oil and fluids!
Do you perform your own maintenance? Get premium synthetic Amsoil products HERE! ************************ www.amsoil.com/?zo=30606222 *************************
When it comes to Synthetics, Amsoil is the best in the business! Amsoil backs up their claim with numerous performance testing methods and results can be found at www.amsoil.com/?zo=30606222
Visit www.RainmanRaysRepairs.com To have your vehicle serviced at Ray's Auto Clinic in Bradenton Florida where we proudly use Amsoil premium synthetics and other top tier products!
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on RUclips, RainmanRay Off Duty / rainmanrayoutoftheshop
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers at www.RainmanRaysRepairs.com
Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
Astro Tools 78450 HD Harmonic Crank Pulley Puller - GM LS, Ford Coyote, GMC, Chrysler, Dodge & Jeep, Black amzn.to/3STBrX9
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
#mechanic #repair #autorepair #restoration #wifeunit #brakecleanmafia
ABOUT OUR CHANNEL
Our channel is about general automotive repair and maintenance . We cover a large variety of automotive services and repairs in a privately owned independent shop.
Check out our channel here:
/ @rainmanraysrepairs
and the Off Duty Channel here: RainmanRay Off Duty / rainmanrayoutoftheshop
Don’t forget to subscribe and share!
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!! 
Авто/Мото
Great video you even took the extra time to do alot of editing. I don't know where you get the time. Thank You
I give up a lot of “me” time to do what I do. The world is full of selfishness and I want to see selflessness make a comeback. Bringing in something good will spark change through inspiration.
@@RainmanRaysRepairslove that attitude Ray
@RainmanRaysRepairs I love how informative that you make your videos. Keep on being you. The world could use your example to make it a better place.
@@RainmanRaysRepairs Be sure to take some time for yourself there Ray. That and family time is important. Lifes too short man!
Thank you for taking time although you are still not well to educate us im in South Africa paramedic and sometimes works on my cars and love your videos thanks
Mechanic in a can, Janitor in a drum, Husband on the coach.
just reminded me of an old kids movie where an older lady had a child accidentally delivered to her in a 55gallon drum. [ed] dogpiled it, it's called konrad, apparently several movies and possibly a tv series based on the book.
That's so true but these days add robovac
🤣🤣🤣 good one
Except this husband unit is in the engine bay trying to avoid flashlight gravity. 😅
@@williamsquires3070There is a gravity warning sign in the shop.
This is the most entertaining car maintenance video I've ever seen! 16 spark plugs, a battle with tight spaces, and a surprise phone call... you had me hooked the whole time. Thanks for putting in the hard work to show us the process, even if your back is hating you for it. Now I know why I just take my car to a mechanic! But at least I have a newfound appreciation for what they go through.
First experience with BG was around 1986 with an old Volvo with very bad drivability due to junk. 1 can of BG in the gas made it run beautifully
Love BG products
I gave my boss a can of BG for his old Volvo, I could do no wrong after that. He or his Volvo became BG addicts!
Hi Ray great to hear that you are happy in yourself in your own shop so all your efforts are focused on your family and enjoying what you do so well.
I have been following your videos firstly when you were working in the Siberian dealership and now in your own shop with your delightful wife unit.
My wife passed away on 7 March this year from ovarian cancer. Two years 4 months of battling this terrible scourge. Miss diagnosed by two doctors until Fay was at 3-4 stage so no hope of beating it.When my pain gets too heavy I go and watch your videos and feel better pretty soon. Hi again from Geelong in Australia. Cheers Neil
Ray you are very analytical in your processes and daily work, you also have high ethical standards so for us and those like us that enjoy your channel and trust your work ethic, if you think a product is good and beneficial then that is good enough for us. Keep sending the videos Ray, and keep helping people the way you have. I always say, you will always have the hater, but haters do have the right to be wrong. It's just that some haters exercises their right to be wrong more than others.
My father was the professional mechanic in the family, GM/Buick/Opal Fisher Body line mechanic. I was taught clean the cylinders then change the plugs so as not to foul the new plugs.
My 2012 1500 manual stated that the spark plugs had to be changed every 30,000 miles. The last plug on the drivers side needs a contortionist to remove. Great job.
Yes its odd how trucks keep getting larger, but engine bay room keeps shrinking in size.
I'm waiting for them to get smart and make a flip up frt clip like some of the corvettes had only you can take it all the way off with 2 wire harness plugs. Pulls the fenders and wheel liners off too. Or just open the hood to chk fluids
It's why I have a GMT800 also Diamler/Benz-Fiat-Stellantis Chrysler (Yes Chrysler has been handed around like a hoe) shoehorn their stuff, because a neighbor has an older ram from 2005 and it's the same way as this 2016.
Or just make the hood and side panels out of LEGO blocks!
Actually just change the plugs as you go through the fender well to repair exhaust manifold 😬
I like the prototype race Camry Toyota put out. The entire body lifts off like the old COE trucks.
I've been a mechanic for 35 years in michigan and in force is the best penetrating oil I've ever used.
Whenever I sell a Tune up, I include spark plugs, PCV valve, clean the throttle body, top end decarb service,Battery service, and fuel filter if external.
Good morning Ray, I continue to appreciate your attention to detail for our benefit. Also, a Dave sighting even though you were trying to gas him out. LOL! 😂😂😂. Happy Sunday to you!
Ohhhh nnnooo! I now know where that Lizard went that was crawling on your floor yesterday 🤣
Great video Ray , but how is atomizing the cleaner important when it simply sprays on the throttle valve and becomes a liquid again? Why not just have it drip onto the valve as the engine runs?
The music over the super fast lightening speed mode was epic. Understanding the trials and tribulations an honest mechanic goes through is priceless. Plus, I get to learn things! Ray is the best online mechanic in the industry. IMHO
I have a 2014 version of that same engine, also in the pickup. I struggled similarly to you when I changed my spark plugs. Your experience and efficiency getting through the job actually showed, at least to me.
I did use a different spark plug socket, which may have helped me out.
It was also pointed out that I could have pulled the fender liners and come in through the bottom, and it likely would have saved time.
Hey Hey , on a previous post a guy said your videos weren't as exciting for him when U werked at retail shop. I think you're doing a great job , I watch one after another job you do. I wished there was a great mechanic in Chattanooga like you . Great job , keep up the wonderful content.
We've been using the zero drive in aerospace for many years. We call it a Hi-Loc ratchet. Also, it's not magnetic but rather contains a one way bearing.
"sprag clutch"
Curious here, have you opened one? I'm wondering how the reverse function works, if it's a "sprag clutch/ bearing", as I only know those from automatic transmissions, to reverse their direction, you'd need to fit them backwards. 🤔 Obviously, there's something designed in to make it reversible.
I really appreciate your allowing us to see what you are doing. Your camera set ups are great. This job is a tough one.
35:23 All in all, your videos are great, not only the content you offer, but the quality of the videos, but to hear a boss music on the background as you unleash the spark plugs is priceless, makes the extra mile
You make these videos so interesting thank you Ray
When I did plugs on an 08 hemi ram my go to ratchet was my Carlisle 3/8 longer reach swivel head. I know you have one as I've seen you use it. Made quick work of those back 2 coils on the driver's side. And a matching 1/4 drive for the 10mm hold downs. This is not a fun job but you make it look easy.
So inconclusive test because if the snake oil have an effect it takes several heat/cold cycles. You should test it on your Interceptor taking photos before, after a go, and after a week.
When you said " Lizard 🦎 Lotion" I am now wearing my morning coffee... Thank you Ray!!😂😂😂
i've been watching alot of your vid's just lately, impressive stuff!
Love Ray’s videos!!!Question though. “We do not start threads on spark plugs with the electron ratchet, you may cross thread an aluminum cylinder and that would be bad.” On the driver’s hard side, drop in the plugs, hit them with the electron ratchet. Did the hand start get cut out or did Ray just do what he said should not be done? 😮
if you noticed he feathered the wrench so if the threads crossed he would know
the main reason you do not use an power wrench is most people will go full throttle and cause the threads to cross with out them knowing
Yes I noticed this
The more you know, the more you can break the rules because you become more attuned to what is actually going on.
Back in the day when dealers started selling fuel system cleaning we invested in a Moto-Vac machine to be able to offer the same service. It was a hard to sell service at first but testimonials from those who had it done increased sales and allowed us to help more people with this valuable service.
It temporarily helps, I know this because a 2004 tahoe sat 5 years, started, had a p300 code, I pulled all 8 injectors and looked in them each, had what looked like crystalization/stones in the screens so unless if the injectors can be pulled and cleaned by breaking up that trash using a plastic scribe and sprayed out using a cleaner, just hooking up to the fuel system to pump a solution through is not the end all fix.
Moto Vac does that Vac money from the customers pocket.
I have always found you’r videos entertaining informative & a credit to you’r honesty as a Mecanic . You are sadly what’s becoming a rear bread in todays auto trade . Keep it up as i am sure many people will always enjoy what you have to share ..
Compression test before and after is a great gauge of the lizard lotion effectiveness…The cleaning process continues for the next several days after applying the BG Platinum Fuel Svc.
I just changed the plugs in my 2013 Ram. On the passenger side, the wiring harness can be moved by detaching it from the firewall. The heater hoses too. It is a lot easier to remove the plugs.
The wobbly bit is essential on the drivers side, nearest to the firewall. The the brake vacuum assist can be easily relocated for access.
I ordered iridium plugs off Amazon, specified for my engine. Every one of them were gapped improperly at 55, rather than 43. I adjusted them and they’re working great.
My concern at this time is, I found out after installing the plugs, Champion is an inferior product. I’m not inclined to change them again. But, watching closely, just in case.
My truck just turned 70k and runs great!
My 1984 datsun/NISSAN pickup had a 5 speed, 2.4L, 4 cylinder , 8 sparkplug, dual ignition with 2 cherry bomb glasspact mufflers.. Damn i miss that truck.
Hay Ray, get you a Stanley ratchet with a turn handle, these are fantastic and a life changing experience, just turn the handle and it turns the ratchet with ease. There 3/8 drive and I bought mine off Amazon
Hey Ray. Thanks!
Good morning Ray,I have the 4.7 L in my 09 Dodge. I also have 16 plugs, two different plugs. Plugs are known to break off. It took my mechanic 2 days to do this job.
Thanks for the extra efforts you showed us. Interesting
Watch you for years and I have learnt so much from you from like the proper to change brake pads
@Rae SOoooooo Happy that the Doodily Doodily Dooos are back, we really missed those
Thanks for another great video! Looks like the spray helps.
I felt my blood pressure rise watching you do the drivers side. I had a Charger with the same 5.7 Hemi for a few years that I gave to my son. I am no longer a fan of Mopar after replacing the engine on that car. Everything was more difficult than it needed to be. There was also a long list of "for this particular engine".
I like your comment about relative ease of tune up. I had my Honda CRV in at the dealer for a diagnosis of a strange engine noise ,a rather low rattle like noise at 1500-2500 rpm that then disappears at higher rpm. They couldnt find the cause of the noise and only suggested a "tune up" which entailed cleaning the throttle body and changing the spark plugs for the paltry sum of $600 plus tax (and shop consumable) of course. They charged me $175 for the pleasure of looking at my car for an hour and I declined to give them another $600 and instead bought a set of plugs and some throttle body cleaner and did the work myself. The car only had 50K mileage and when I removed the plugs, they looked just like the new ones and the "carboned up throttle body" was perfectly clean just as I suspected. I did replace the plugs, sprayed a $10 can of cleaner into the throttle body and intake and test drove it. The noise is still there which was no surprise. I guess I will follow the dealer suggestion and just drive it till it throws a code that can be checked out.
I just find it funny that after all the crap people have given me about the 8-plug 2.3 Lima engine for the early 1990s Ford inline 4-cylinder engines, Dodge decided to use the same engine theory on their Dodge truck engines: That to get a better combustion in the combustion chamber, and to more thoroughly burn fuel and recirculated EGR gases, they use a strong primary burn, and a weak secondary burn -- which is why every cylinder has 2 plugs.
Nissan had duel plugs in the late 70's.
thankyou for the dodledo its been to long,
I have a 12 Ram 2500 with the 5.7L. I just did this repair last fall. Not an easy thing to change the plugs on these trucks. The rear plugs on the passenger side are difficult but the drivers side third and fourth plugs are super difficult. You really have to contort your arm and wrist to get the coils off and on as well as change the plugs. With my truck being a heavy duty 4X4, even at factory height, it makes it so that you almost have to lay on the engine partially to get to the driver side plugs. I cuss the entire time and you don't want to know what I think about engineers while I am working on today's vehicles.
Lizard Lotion sounds like something you might need at a truck stop
Only if you own a lizard. 😆
Definitely a truck stop lot lizard lotion 😂 never let lot lizards into your truck lol
I bought a magnetic sparkplug socket at O'rielly auto parts. Best investment ever! I never have a problem with the plug falling out of the socket and compressing the gap. There isn't a rubber holder to stay on the plug when you pull the socket off the plug. It's a great invention.
Hey Ray, I did this service to my 2010 Jag XKR. The direct injection made the valves all gummed up. Like one of Eric's I do Cars videos. After watching your videos a while back I bought the cleaning setup. Napa had lot's of brands but no BG but I went with a dual product setup like yours. Like this, it took a couple of days but when I went back into it with my endoscope it was dramatically cleaner. I agree, it takes a coule of heat cycles to break the gunk off but you can tell because the exhaust stops smoking. Easy process to do after oil changes. Makes the neighbors wonder tho.
This reminds me that it’s time for my colonoscopy. Actually, you could offer this service, Ray. In any case, another excellent video that made my day great! Thanks.
I don't have the tools brother Ray has. So to put the plugs back in my hemi, I cut a piece of 3/8 fuel line and wa-la instant plug remover and installer. Just sayin
I have an old spark plug boot I use. I add a 1/4" extension to the wire end to give me reach. I've had it since the 90's.
Did that trick back in the 70’s. Works very well.
Voila?
I have been using the fuel hose for many years and have one in my cart and one in my travel bag ! It has been a frustration saver!
My dad was a helicopter mechanic who got his training back in Vietnam. In his tool box was a length of clear hose just for starting spark plugs. It worked for him for 50 odd years!
Good morning Ray 🌄 can't wait for you to get on to that charger and start working on it.
If he does he's going to have to hurry before it returns to elemental iron ore in a pile in the parking lot.
Keep on doing what u do
Happy Sunday....
My 2016 ram 5.7 called for .044 and mine also came out the box at .040 and installed them and it runs perfectly.
Good work!
Great video, Yes the cleaner will work!
Hey Ray love your channel, I like how you sometimes love your job and do it twice. At work we say we do it nice cause we do it twice
The spray is definitely working!!
Ray it does work I m sure you will show this
Nice one Ray
Very effective
Over a year ago you showed us a simple at home intake cleaning process, I did it vechile ran much better, thank you
One question could the carbon chunks plug the catalytic converter?
It's interesting that all this contamination of throttle bodies and intake valves are the result of the PCV running crankcase blowby through the intake. One would think there would be a more efficient method of preventing blowby from entering the atmosphere without shortening the life of the engine.
Good morning Mr Ray, hope y'all have a great day
They loved their spark plugs so much they put twice as many!😂
Everything on this Engine is Hard to Replace, Engineers Build Crap but Never Work on Them...
Emissions. Two flame fronts gives a more complete burn when tweaking timing for more power. It allows the computer to do more for fuel economy while still being able to generate power when needed.
@@sumduma55 well if it’s emissions why not put in 24 spark plugs and while you’re at it put in 14 more sensors, those pesky emissions that we cured 40 years ago. I think they need an injection system to make my exhaust smell like rose petals and potpourri , but that might take more relays and servos and a few more spark plugs…😁
@@devinangola3458 how does any of this crap you mentioned affect emissions? I already said how 2 spark plugs does.
@@sumduma55 my original comment was a joke , but you continue so I can troll you.
More spark plugs!😛
That wrench is a great option to have in your box, I have one like that from 20-30 years ago. Some times it just does what you need at “that” particular time.
In many cases of direct injected engines, the valves get so carbon encrusted, you have to use walnut shell media to blast it away. A catch can for the PCV system helps keep the intake cleaner.
Just a couple days ago I replaced both exhaust manifolds on a Dodge very similar to that one. Doth manifolds were very very rusty and each side had multiple broken bolts. Extracted the broken bolts with a welder. Also replaced all the plugs and coils. Ignition coils were all getting green corrosion on them.
Nice high speed photography ray
Brought out my inner Ray today. 07 Grand prix cooling issue. I do most work on my own vehicle's.
Quick question, you atomized the liquid only for it to pool on the butterfly, so is there any real point in the atomization of the liquid in the first place? (Genuine question not REEEEEE LOL)
Great question. The atomizer applies the chemistry at the rate that’s effective to saturate the carbon….It’s wet because it’s working. The goal is to scathe clean vs chip away carbon. The cleaning process will continue over the next few days…The chemistry is still working along with the 44K in the fuel tank. This is a great video showing the correct way to apply this Svc. *I am Ray’s “BG GUY” fyi
I like to get my money’s worth from Ray’s videos, when he fast forward the video I slow it down. 😂😂
38:59 we call them Bull Bars here in the U.K.
You pay for it???
@@aciddiver1978 yes I’m a member of Ray’s channel.
They're Bull Bars here in Australia too, trust me, you never want to run into a Bull, I have seen the remains of a Semi after it hit one at highway speed.
We call them cowcatchers in Norway.. (kufanger)
@@johnt.848 In UK you can't buy proper bull bars ,they have to be flexible !!? this is theoretically to protect pedestrians, who didn't ought to be in the way ! However if you can find a vehicle with proper bars (pre 2007) it is legal to keep them on your motor, though where you are legally, if you actually do hit a pedestrian remains to be seen.
The Walnut air blasting kit is (hands down) the absolute best way to clean the valve stems and intake runners inside the cylinder heads on Direct Injection engines (it cleans them to new condition). The BG cleaner you used can do a good job on the piston and valve tops, what would probably help is to also add BG 44K fuel system cleaner to the gas tank and take it on a long highway drive so that any loosened carbon will be blown out over a 1 to 2 hour drive at highway speeds.
Ray i love your vids and my wife and I want to take a road trip and visit your shop.
Two aspects of maintenance that made the most difference in operation was cleaning the throttle body and using BG EPR which removed carbonized oil from the oil rings. This was done around 180,000 miles. Spark plugs, filters, and PCV service at different intervals made no difference. BG EPR is the only snake oil product I have tried and found to be effective.
The music during the super high speed motion was inspiring. :)
If you looking for it it's Rameses B - Cybernetic. I was hunting for that song myself
I've done the same with a cup of h2o sucked into the intake through the brake booster vacuum line. Pin the throttle at about 2,000 or have a friend do so. Smokes like a blown head gasket while you're doing it, shines the pistons up like nobodies business though. The cleaners do work better, they just have a cost for the speed/convenience. No judgement to Ray for using it, winds up being the same or less cost wise because of the billable time needed with plain water.
I have a ratchet like that. It works great. I think it has a sprag clutch in it. I have not taken it apart so I am just assuming that is what it is.
what did wonders for my ram and hemi was a catch can. kept the pistons very clean.
Excellent video. NGK's are normal plugs to come from the factory these days. Earlier Hemi's would have had standard copper plugs, but even on those earlier Hemi's Chrysler recommends newer type plugs.
I done the plugs on my 15 1500 with the 5.7 and I found it easier on the passenger rear to pop that grey wire tie connector and remove the black computer bracket and it gives a lot more room. On the driver front the get the electric connection off I found it easier to unbolt it and lift coil up to unplug it
Interesting stuff Ray 👍🏻👍🏻👍🏻🇬🇧
Hi Ray I think the cleaner is going to be a effective.
Great job
Welcoming back!
I think the latest rage in cleaning the carbon buildup from intake ports is the walnut shell blasting, seems to be the most effective and also the fastest.
Walnut shells is a very old technique, Frozen CO2 is the latest.
Walnut shells is a very old technique, Frozen CO2 is the latest
The hemi is not direct injected, no need for cleaning, at least not for the first 200k miles.
Used blasting method to clean pizza pans & rubber production molds works great
Hard to do with the engine in the car, no?
Ray they only had 9 of those ratchets left in stock when I ordered 1 for shipping to the UK, Top sales man you, lets hope they send you a set !!
RMR love watching you channel. Its my morning norm with a java. I'd be interested to see a comparison using a cleaner ( BG or SEAFOAM )added to the fuel every 4 months or so vs the BG cleaner process to see the difference?
It's Alvin and the Sparkplugs!!!😅😅😅
It's all good in the neighborhood
New Tool debut is cool
Thank you for fast forward funny voice kids went crazy and laughed great video
Just a heads up on those spam calls: Be careful and try not to say the word 'yes' at all! They use a recording of you saying that to access other stuff.... Instead, if they ask, for example "Can you hear me?" .. Respond by saying "I can hear you" They get frustrated and try to get you to say the word yes, bit dont do it!!
I always reply, "no, I cannot hear you"...that confuses them..
Hello. Hello. Hello,click😅
I’m not stupid enough to answer spam calls…..yet.
They call all the time!
I keep asking them, "Can I help you"? Frustrates spam callers no end ....
Great job ray ,absolutely not snake oil ,does a really great job on the engine 👍
Gum Out used to make a kit to clean out the carb and cylinders. It came with fuel fittings for the carb, and you hung the carb cleaner like an IV and ran the car on pure carb cleaner.
Ray I remember when we used to regap plugs because the metal piece bent out after so many mile. Anyway after 50k mile I would change them out anyway and not even check for gap. The question is a bad gapped plug worn out or just a bad gap. If I was told to check everything I would change the plugs also. I like the new zero drive ratchet. Nice video
In the days of old we used to mist water over the top of the carb at 2000 RPM and would do similar things to the carbon in the cylinders. I'm m sure that the atomizer works better than the "Windex" spray nozzle did though.
Can your scope rotate to look at the valves?
He needs to clean that engine bay. Nicely done sir as always 😊
Keep us updated on the Zerodrive ratchet. I looked it up and I am very interested to know your opinion.
If I ever had my own shop, I would invest in some rollers, kind of like a chassis dyno, to do all the driving condition tests like this. No speeding tickets or wrecked customer cars.
Damn it’s already 80+ degrees. Up north we had around 40. It’s getting warm. lol.