How to make a Servo 360 EASY!
HTML-код
- Опубликовано: 10 сен 2024
- The servo I used was from Hobbyking:
hobbyking.com/...
Epoxy Glue: amzn.to/2XPscrE
Dremel Tool: amzn.to/2XWkrQY
*****************************************************************************************
There are two ways of doing this and this is the easy way.
Make sure you use glue that gives you enough time to adjust but also that sets hard (not hot glue or superglue). I used epoxy.
If you finish glueing and your servo moves in the neutral position then DON'T WORRY! Simply adjust the trim on your transmitter.