hello! Can you tell me the biggest difference between the K6R and the K6 EFI? One is carburetor and the other is injection? In my country the dealerships have little information about it. thank you!!
Hello. I just bought the K6 EFI.. do you think it’s needed to have fork bleeders so they don’t blow the seals? Also how to I take the fuel filter out so I can make sure it’s clean. I’m going to make sure I run no Ethenal fuel like you mentioned
I have a k6 250 and it’s barely driven after 1 mile the bike shit off and has no compression. I’ve never had a problem is this something you know of? Thank you
Sorry, There are many different K6-250's ..I have the dual over head cam model with a carb. From your description I think it could be a lot of things...🤷♂️
@@jonathanmey5345... No 🤣🤣 why should I do your work for you ? 🤣🤣 in all seriousness I have no clue about that part and would have to search it out just like you...I don't even own a Kayo anymore (for over a year)... my guess AliExpress may be a good place to start.
Contact Joe Henner at GPX Service@gpxmoto.com he can help you with mapping..but also you may need to up the idle screw on the bottom of the throttle body..but I do not have the EFI model so I am no expert on it.
Contact Joe Henner of Henner Motorsports on Facebook...if you have the 2021 K6-R you can switch out the complete fork set with Honda Showa forks from a crf450r 2004-2007.. they are the same 47mm forks and drop right it, no mods required...and you save 6lbs.
My opinion is Biased, but I would go with the K6-R It has the carb on it...but you also get a lot of other more quality components like better suspension, billet hubs, billet clamps, better tires etc...and no hassles with the EFI and injector...just my 2 cents....both are really options no doubt.
Hey Gang , Sorry for the sound of cars passing by and birds chirping..had to film with garage door open ir pass out from the heat.🤣🤣
hello! Can you tell me the biggest difference between the K6R and the K6 EFI? One is carburetor and the other is injection? In my country the dealerships have little information about it. thank you!!
Also, the KT250 engine is a copy of a Yamaha DT230 engine. Any internals, cylinder, electronic power valve and more are interchangeable.
Hello. I just bought the K6 EFI.. do you think it’s needed to have fork bleeders so they don’t blow the seals? Also how to I take the fuel filter out so I can make sure it’s clean. I’m going to make sure I run no Ethenal fuel like you mentioned
Any idea where to get a skid plate for one of these bikes?
I have acerbis husky 3 gal tank bolts right on but you have to use ktm or husky shrouds
Thank you tons for this information. I just purchased a Kayo K6 250 R yesterday & I’m a bit nervous about the off brand thing.
It's pretty damn reliable if you do your maintenance...also GPXMOTO.COM..can get you parts.
@@Dirt_Bike_Dave Are they the same bike then? If so, which GPX is the same or how can they get parts?
@@abepeterson Joe Henner who works there knows how to get parts...some things are the same.
I have a k6 250 and it’s barely driven after 1 mile the bike shit off and has no compression. I’ve never had a problem is this something you know of? Thank you
Sorry, There are many different K6-250's ..I have the dual over head cam model with a carb.
From your description I think it could be a lot of things...🤷♂️
Could you please send a link to a good aftermarket radiator for the EFI?
@@jonathanmey5345... No 🤣🤣 why should I do your work for you ? 🤣🤣 in all seriousness I have no clue about that part and would have to search it out just like you...I don't even own a Kayo anymore (for over a year)... my guess AliExpress may be a good place to start.
Husky tank works but you have to use husky or ktm shrouds
What year did you use?
Mine is dying when idling down a hill. What should I do? It’s also poping and shooting fire ball sometimes. It’s the efi
Contact Joe Henner at GPX
Service@gpxmoto.com he can help you with mapping..but also you may need to up the idle screw on the bottom of the throttle body..but I do not have the EFI model so I am no expert on it.
Change oil frequently. Filter every 2 or 3. The KT250 2 stroke, change it every ride.
Why do you think the KT250 oil needs to be changed every ride? It’s only gear oil.
Where is the spark plug location on the kayo
Where's the fuse location??
Hello. Who sells fastace fork springs ? Or an alternative spring from another bike? I was able to find stiffer spring for the shock but not the forks.
Contact Joe Henner of Henner Motorsports on Facebook...if you have the 2021 K6-R you can switch out the complete fork set with Honda Showa forks from a crf450r 2004-2007.. they are the same 47mm forks and drop right it, no mods required...and you save 6lbs.
Wich kayo k6 is best????
1) EFI
2) nibbi N34 carburator
Thanks for answering.
My opinion is Biased, but I would go with the K6-R It has the carb on it...but you also get a lot of other more quality components like better suspension, billet hubs, billet clamps, better tires etc...and no hassles with the EFI and injector...just my 2 cents....both are really options no doubt.
For the efi would the front ktm plastics work with the front
Not sure what you are asking? Please be more specific. 👍
How does it compare to a crf 250f
Totally would smoke that bike..better in every way...closer to a crf250r...actually very much like an older RMZ250 before they added fuel injection.
My big bore kit came from gpx
please translet indonesia all your video
Can't..don't have the software
Do you recommend this bike?
Damn good for the price.