@Idkwhawritehere that case can't be made anymore not with AMD's more recent CPU's like the 9950x... and on the really high end the thread ripper has always been better
@@vekazu_is_great_guy If it's a 16gb variant ig its fine. But still prices were different before super variants for the 4000 series were different when 4080 was still getting shitted on.
To check for strange sounds, gpus getting thicker and thicker yet still can't put proper fans on them suckers unless you pay a Noctua premium and get the colab with Asus...
@@rusername You still shouldn't be putting half of those things in with a powered screwdriver. It's really easy to strip a lot of that. In fact, I'd never buy this one after watching this because I'd bet my own rig that one of those screws is now stripped out.
@@geofff.3343 yup, I was always told to never use power tools on any components. It falls under the other piece of advise that if something doesn't fit right when you're building a PC you shouldn't use force. Guy at work couldn't get his RAM to slot on his first build and ended up breaking the gold contacts because he had it flipped.
@@geofff.3343 Nah, you'd have the clutch set so loose it wouldn't go half a turn misthreaded. If you could bury one of those screws recutting the threads all the way down you crush whatever component was under the drill. I think you get a better feel for whether you are lined up square with a drill driver too vs a power screwdriver, or at least I do. I've never used my drivers on a build but I've only done 2 in the last 7 years, not too concerned with speed, but I also don't let anybody do the work I can do myself, cuz nobody GAF
El tipo que armo esta maquina lleva la gestión de cables a un nivel absolutamente supremo, un fundamentalista de la perfección cableada. Aplauso enorme! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@@theberchand also he might use a 1080p screen so it seems useless to have a higher card than that And I think 3060ti or a 6600xt/6700xt would be better and cheaper
Nobody is talking about the most egregious thing which was the wireless antenna instead of being magnetically attached to the outside being stuffed in between metal panels. Literally easiest way to jack up TX/RX retries and wireless frame loss
@@Mazeau24 I would've agreed with you prior to the newer itterations of wifi (Wifi 6/7) Finally the downsides of wifi are negligably the same as running ethernet. The 1ms~ extra latency is faster than your monitor refreshrate, and the throughput speeds are pretty similar, unless you're running 10 gig.
Man I've built 4 or 5 PCs at this point and I'm damn good but this guy is on another level, I've never seen cable management that clean in my life that's amazing!
PRO ART from Asus - one of the best lines in terms of design and appearance, I was especially struck by the design of the video card - it’s simple, it’s very simple, but it just does look really nice or smooth. I liked the motherboard less than the others, due to the transparency of some elements on it, which does not go well with the beautifully simple design of the video card
@@StepStoolOnWheels maybe user only do cpu intensive works. Even So, 4060Ti is way too weak to be with this CPU. They could've gone for a much higher GPU. Even 4070 would've been good choice
@@TexturaI That’s not the case here. As you can see, the case, four sticks of RAM, and matching color AIO all indicate a well-thought-out build. They could have allocated more funds for a better GPU if budget were a concern. Clearly, money isn't the issue. This is a pre-built PC, not a custom one, which is how the company maximizes profits.
Always use a screwdriver when installing screws on the motherboard, the slightest mistake may crack the motherboard or break the screw due to the drill power.
@@rendaddy_tells me you've never used one lol even with rhe adjustable torque you have way less control and can strip it out or install it at an angle and ruin it. So yes still always use a screwdriver when installing.
@@HellbowMediaLLC I've been working for a major brand for the past few years and everyone uses them. I've reassembled thousands of PCs. The trick is not to cheap out on the driver, none of those shitty battery ones.
If you really wanted to point out a flaw you could've argued that having 4 sticks of memory is going to only cost more and be useless for the motherboard in the video since that motherboard doesn't support quad channel.
@@tylerlucian5030 Yh guess 4080 would be ok, But since one is going for a top end processor having a top end gfx card matches without the possibility of throttling in games ! But 5090 will be out soon enough lol :D
@@malvinchau2056 a torque wrench? Do you even know what a torque wrench is lmao? All contact frames, whether from Thermal Grizzly, ThermalRight, or any of the other clones are installed with a screw driver and the tension really does not matter anywhere near as much a Thermal Grizzly made it seem. All you have to do is tighten them evenly in a cross/star pattern until they stop and would require more than light force to continue turning.
@@KookooWTur literally incorrect. But I won't lie the reason is complicated. But basically CPU can do better speeds and not get overwhelmed with only 2 of them, depends on CPU tho
People complaining about the thermal paste pattern, the heatsink presses down with enough force that any pattern will be completely lost. It matters more how much than the pattern. For how much there's a wide range of OK. Too little could be an issue, but someone is unlikely to put too little. Too much is just messy.
probably isn’t for gaming as it also has 4 sticks of ram rather than 2 higher capacity ram sticks so that it probably shows that it has maxed its capacity.
@@topsecretcoding353 that CPU is way too strong for for that GPU. Cutting cost on the CPU for a better GPU will result in a much higher FPS per dollar spent for the same price
I remember back in the early nineties us ICT techies prefered Compaq over AST because of their build quality. 10 years later, there were no PC brands that gave a damn. Make it cheap and barely usable, slap on windows on it and call it a pc.
No Bottleneck will occur. The CPU is way too good compared to the GPU for a bottleneck to occur. A bottleneck will happen when the CPU can't keep up with the GPU.
@@bigmonkedong Sorry to say that you are wrong. But bottleneck doesn't occur only when CPU is not the same level as GPU. It can occur with any components, your RAM can bottleneck your pc or your monitor. Bottleneck occurs when any of the components in the pc are not of the same level.
@@abhilashs2264 You are right, I only meant that this kind of "bottleneck" does not affect gaming negatively and gives the gpu space to run at full load
@@scr3am273 And just because it's a comment on RUclips doesn't mean it's not coming from a professional in the area. Although, yeah, not an issue at all, same thing as a normal screwdriver, don't stab the mobo and you'll be gucci
@@zekihvh maybe he is, but maybe you have noticed that in comments everyone acts like they know everything better, always giving useless advices and criticisms.
@@scr3am273they clearly do not. They paired a K series processor with a B series motherboard. They paired a 60 series GPU with a i9. They populated all the memory slots, when unless you use a fuckton of memory is advisable to use exactly 2 sticks. Cable management was professional level tho, that's undeniable
Customer should've bought the Z790 Creator Wi-Fi instead of the B760 since they got i9. Note that the i9-12/13/14900K needs a Z6/790 motherboard, because of the VRMs. And the ProArt RTX 4080 or 4070 Ti would fit better
13900k with 4060ti gives me facepalm. You could build with 4090 in the same price range. AIO isn't mounted at the front. With this budget you could've bought Arctic freezer 2 with 0db fans, no rgb plus socket cooling.
планка для процессора - чтобы улучить контакт для охлаждения. 4 планки - ну хочет он больше памяти, значит надо, тут проблем не возникнет. водянка на верх - продлевает жизнь водянки за счёт воздуха которого просто останется сверху и не мешает насосу, И помогает видеокарте охладиться, хоть и температуры процессора будут чуть чуть выше (НО не во всех случаях, иногда водянка лучше работает сверху). компьютерный гений, сиди дальше на ксеноне и китайской материнке, и плачь о том, чего у тебя нету.
@@revi5343 видимо ты ддр5 не собирал никогда. с четыремя плашками даже быстрая 6400 память на чипах а-die может завестись только на 4800 без ошибок. край 5600 будет с конскими таймингами. 4 плашки ставятся только если 128-256 гигов оперативы надо и по другому это не сделать.
Configuration list is in the Discription.
what is the price for all things together?
i would like a computer like this
@@expresstutorial3255don’t, 4060 ti is not as good as 6700 xt for price to peformance
Greetings may i know the name of the Case? Sir?
Why did you pair a 13900k with a 4060ti
That music came out of nowhere
the chinese stock music at the end
It is good tho
Sounded like Touhou
@@Rekon-se6wvfinally, a man of culture 🗿
@@mrhandled I appreciate finding a fellow connoisseur
Cable management 💀❤️
Fr
Но только он бесполезен🤣
@@rolwin7656 idk this language
@@Abdullah-Mehmood This is the Russian language.
@@Naresha i know
"Mom,I need this pc for powerpoint".
That's power with no point 💀
💀 💀 💀 @@AmeerBANKAI
@@bakhtiaruddin1582 wow you subscribed to hijab .. are you the goat
@@AmeerBANKAI wait...did I just hear a name that is majestically familiar??? Did I just near someone utter the name of ... The one and only...CHAMP!!!
With a 4060ti the only thing that it wount bottleneck the cpu in is powerpoint
i love a clear case no lights just pure powah!!
the guy spend 500 more on asus
if he dont use asus, he could bought a 4070 ti super build
Intel cpu... power? Dude stop
@@richardburrell7665 if you not only play games but also work, then intel processors are more preferable
@Idkwhawritehere that case can't be made anymore not with AMD's more recent CPU's like the 9950x... and on the really high end the thread ripper has always been better
bro just called me poor in 300 languages
😂😂😂😂
حقيقي 😂
Using a 4060ti like bro calling people poor with telling em they're poor
@@SpartanLeader259and uses a cheap knockoff of the Thermal Grizzly CPU contact frame.
he have a big lot of money
Finally a PC build which is sleek and elegant without a massive amount of unnecessary led light strips or colour water coolant. Damn fine job
But still has a 4060 ti💀
amen. no lights for me.
@@vekazu_is_great_guy The point is it isn't a gaming rig, it's a workstation or editing rig 🤣
@@doominance even for those tasks 4060ti is a really bad choice when 3080 exists and you can get it used for sometimes lower prices than the 4060ti
@@vekazu_is_great_guy If it's a 16gb variant ig its fine. But still prices were different before super variants for the 4000 series were different when 4080 was still getting shitted on.
Everything is temporary.
But rotating the GPU fans is permanent😂
To check for strange sounds, gpus getting thicker and thicker yet still can't put proper fans on them suckers unless you pay a Noctua premium and get the colab with Asus...
@@fesen2 I just heard about those fans for the first time just 6 minutes ago what the actual fack?
Yeah, every single fuckin' PC montage you'll find has it. They just have to, don't they?
@@YonjiBajonji just rage baiting for these comments and more engagement
@abhimanyuray8225 You are temporary, yes.
But everything is permanent 💯
The fact that it's got no RGB is an ABSOLUTE WIN!
If only building computer in real life was this satisfying lol. I be raging sometimes but I’m happy in the end lol
when the m.2 gets overtightened and you hear it crunch 👌noice
that is the screwdriver
@@rusername You still shouldn't be putting half of those things in with a powered screwdriver. It's really easy to strip a lot of that. In fact, I'd never buy this one after watching this because I'd bet my own rig that one of those screws is now stripped out.
@@geofff.3343 yup, I was always told to never use power tools on any components. It falls under the other piece of advise that if something doesn't fit right when you're building a PC you shouldn't use force. Guy at work couldn't get his RAM to slot on his first build and ended up breaking the gold contacts because he had it flipped.
Me when I go from working on my vehicles or construction to building a PC without resetting drill clutch
@@geofff.3343 Nah, you'd have the clutch set so loose it wouldn't go half a turn misthreaded. If you could bury one of those screws recutting the threads all the way down you crush whatever component was under the drill. I think you get a better feel for whether you are lined up square with a drill driver too vs a power screwdriver, or at least I do. I've never used my drivers on a build but I've only done 2 in the last 7 years, not too concerned with speed, but I also don't let anybody do the work I can do myself, cuz nobody GAF
Imagine having to hear that every time you turn it on
You would remember that guy who assemble a 13900k with a 4060Ti !
@@gorytarrafaI was about to put an i9 14900ks with a rtx 4070ti, and I realized that the best fit for that processor was at least a 4080 super.😂
@@AlbertWesker_GOATway to call yourself broke
nostalgic
@@AlbertWesker_GOAT Better to have Weaker GPU than CPU
Finally a CPU build without rainbow colours, just need a light inside which can be turned on or off for cleaning or removing stuff
13900K + 4060Ti the average prebuilt combo
If the software you are running is 100% cpu depedent this build is perfect.
@@Solano1111 9 times out of 10 they aren't
@@Solano1111then why would you not only buy a very expensive but also the worst value gpu on the market?
@@Solano1111it’s a gaming pc, you’re going to be using the gpu dude
@@tylerlucian5030 No one said it was a gaming PC this is likely built to be a workstation, thats what the ProArt line was designed for anyways
Now my PC is ready for PowerPoint presentation 💀💀
Heyy could you help me a little
Finally a PC that's super easy on the eyes and don't have obnoxious colors going off. My ideal PC frfr
except the cpu :|
@@DragonDev22 how is white an obnoxious colour
@@caldtoo its a 13900K so it has stability issues, thats what im going at. Not trying to offend anyone or anything
you do realize the rgb can be turned off , if you don't want colors
@@thebigoof2601 lol
beautiful build
the lack of RGB duplicates the beauty of the build too
13900K goes with at LEAST a 4070ti
This isn't built to be a gaming rig. It's for CPU intensive operations.
@@alphanerd2305they they should have gone AMD
@@Lochie4272 Perhaps. AMD has done fairly well in the AV editing side of things in recent times.
@@Lochie4272no cpu is better than the i9 13 or i9 14. lol.
taking power consumption into account the 7950XD3 is better than either @@ErwinPPP
This pc for editing: ✅
This pc for price to performance: 🚫
It was actually build for editing.
Yeah it says pro art
Finally someone who realises that this isn’t a gaming computer
u can use 4090@@Pc-Build
This is great for gaming
Nice blackout aesthetic, looks clean
always appreciate the look of proart parts, too bad they're usually a lot more expensive than competitors
El tipo que armo esta maquina lleva la gestión de cables a un nivel absolutamente supremo, un fundamentalista de la perfección cableada. Aplauso enorme! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
The bottleneck is going to be insane
Gaming is not the only use of PCs
@@Pikachu_mappingdans ce cas ne pas prendre une RTX 4060 ti pour ça 😂
@@survivalgames5263it's for video editing and photoshop where the CPU is much more important
@@Pikachu_mappingThen why are they building on a desktop gaming platform?
@@jamesg8246 cause the costumer maybe wants to do both Gaming and work.
the 4060 ti with the Intel i9 hurt my soul in 900 different ways. get a 4090 in there bro 😭
At least something better than a 4060ti
@veilmontTV it's a work station, hence the pro art which was installed. Though I agree, could of added ANYTHING else besides the pos 4060ti
A 6900xt would have been better and the same price
@@theberchand also he might use a 1080p screen so it seems useless to have a higher card than that
And I think 3060ti or a 6600xt/6700xt would be better and cheaper
they might just need it for editing and the gpu isnt used mich
omg your perfectionist vibe and cleanliness and attention to detail id so have you make a rig for me
Nobody is talking about the most egregious thing which was the wireless antenna instead of being magnetically attached to the outside being stuffed in between metal panels. Literally easiest way to jack up TX/RX retries and wireless frame loss
Works on my laptop phone and iPad no problem probably good on a pc case too
The most egregious thing is a 4060 ti
@@csanadtemesvari9251
anything below 4070ti is a joke on this build
No gamer will use it anyway RJ45 all the way
@@Mazeau24 I would've agreed with you prior to the newer itterations of wifi (Wifi 6/7) Finally the downsides of wifi are negligably the same as running ethernet. The 1ms~ extra latency is faster than your monitor refreshrate, and the throughput speeds are pretty similar, unless you're running 10 gig.
Your videos are a work of art.
I think the case is the coolest part of this build.
but he put the M.2 SSD is the wrong slot. Now the graphics card is only running 8x instead of 16x.
@@andrewschliewe6392 and doesn't it run worse with 4 ram slots being used ?
@@Greatest_Scott it shouldn't run worse. Now will it run faster? probably not.
@@andrewschliewe6392 ah my bad I was thinking regarding overclocking, since I do every time I build one.
The case is the coolest part of any build. I mean, it's just a bunch of metal, it doesn't generate any heat.
Man I've built 4 or 5 PCs at this point and I'm damn good but this guy is on another level, I've never seen cable management that clean in my life that's amazing!
"World's fastest GPU" Lists a 4060ti in the captions
Thats a shortcut to a different video in which he does use a 4090
i loled too. fucking slow ass 4060
Genius...
You need to know how to use links...
5800xd and 4090 better
@@goldenelugaoffiziell9703 who would've fucking thought
Never seen a tactical reload of a whole computer before
I'm not one of those "damn this is so satisfying to watch" guys, but damn, this is so satisfying to watch.
I am one of those guys, and yes it really is
Looks: Low
Performance: Extreme
Yes bro
I wouldn't say low looks but ok 💀
Performance extreme?….yikes
Looks:good
Performance: bottlenect
With 4060ti... Good luck)
Wow, a full pro art config. That case looks like a delight to build in.
PRO ART from Asus - one of the best lines in terms of design and appearance, I was especially struck by the design of the video card - it’s simple, it’s very simple, but it just does look really nice or smooth. I liked the motherboard less than the others, due to the transparency of some elements on it, which does not go well with the beautifully simple design of the video card
_Thermal paste patterns:_
X pattern 🚫
Dot pattern 🚫
Line pattern 🚫
*G PATTERN:* 💯💯🔥🔥
G for OG
It's φ
G for Gaymer
Dot is way better😊
@@ithurtswhenip4376 in 2023 no the new cpus dont have rectangle shape best way is spreading or x and 4 small dots in the empty space
Damn dude .. that's clean art ❤
Bro told us poor in 4060 different ways 😂😂
All that cool setup just use 4060ti lolXD
@@_kiaz_fr, like why use a 13900k with a 4060? Just downgrade your cpu enough to where you can balance the build perfectly.
@@StepStoolOnWheels maybe user only do cpu intensive works. Even So, 4060Ti is way too weak to be with this CPU. They could've gone for a much higher GPU. Even 4070 would've been good choice
@@_kiaz_Some people also upgrade over time instead of all at once
@@TexturaI That’s not the case here. As you can see, the case, four sticks of RAM, and matching color AIO all indicate a well-thought-out build. They could have allocated more funds for a better GPU if budget were a concern. Clearly, money isn't the issue. This is a pre-built PC, not a custom one, which is how the company maximizes profits.
Always use a screwdriver when installing screws on the motherboard, the slightest mistake may crack the motherboard or break the screw due to the drill power.
ever heard of adjustable torque screwdrivers?
@@rendaddy_tells me you've never used one lol even with rhe adjustable torque you have way less control and can strip it out or install it at an angle and ruin it. So yes still always use a screwdriver when installing.
@@HellbowMediaLLC I use one every day and I haven't ruined any screws
@@rendaddy_ on pc parts? I highly doubt that considering they are grade 2 and soft as baby shit. Sometimes it's better to just not lol
@@HellbowMediaLLC I've been working for a major brand for the past few years and everyone uses them. I've reassembled thousands of PCs. The trick is not to cheap out on the driver, none of those shitty battery ones.
i9 con Rtx 4060ti... es como si le pusieramos a un ferrari ruedas de bicicleta
Y que sería lo mejor ponerle ?
@@DeLaCruzBurlate 4080 ,4090
I5 de 11
@@DeLaCruzBurlatei5 13600k
Всего лишь посмотри whistlndiesel💀
This case is absolutely beautiful! I am going to get one :)
music is like: "congratulations! now you have a new pc"
こんなきれいなPCのファンの音聞いたことない
With a 13900k you need atleast a 4090 to benefit it's true potential.
If you really wanted to point out a flaw you could've argued that having 4 sticks of memory is going to only cost more and be useless for the motherboard in the video since that motherboard doesn't support quad channel.
@@selucviljoen1994 Good eye ! 😉
Are you braindead?
A 4080 would also be fine. There isn’t really anywhere to go above a 4090 so not sure what you mean by “at least” lol
@@tylerlucian5030 Yh guess 4080 would be ok, But since one is going for a top end processor having a top end gfx card matches without the possibility of throttling in games ! But 5090 will be out soon enough lol :D
I like the little space for the WiFi antenna! Neat! Nice build 👍😂
First time a NON-RGB PC is looking really amazing 🔥
RGB only looks good if it isn’t rainbow
Yo tengo todo RGB y aburre.
I think it looks ugly bc of that 4060 ti😒
Premium looks ❤
How'd you know it wasn't turned on
the amount of comfidence in every move is insane
not their money or parts
Finally a build where someone uses a contact frame
Using a screwdriver instead of a torque wrench really hurt me
But sadly an off brand one
@@malvinchau2056 a torque wrench? Do you even know what a torque wrench is lmao?
All contact frames, whether from Thermal Grizzly, ThermalRight, or any of the other clones are installed with a screw driver and the tension really does not matter anywhere near as much a Thermal Grizzly made it seem.
All you have to do is tighten them evenly in a cross/star pattern until they stop and would require more than light force to continue turning.
@@AdmrlSpeedy more than light force... like the power tool he used.
@@em.dot.2 it's an electric screwdriver, not a drill. They do not actually have a lot of torque usually.
finally, someone who actually fills in all the ram slots
generally its not better, dual channel memory is better in almost every way
@@InaComputer You wanna know whats better then dual memory? quadruple channel memory. Its faster then dual. Do some research next time...
@@KookooWTur literally incorrect. But I won't lie the reason is complicated. But basically CPU can do better speeds and not get overwhelmed with only 2 of them, depends on CPU tho
@@jaredlalal Gotta love people being so confidently wrong xd
This is an extremely satisfying short. I love custom builds. It's rewarding.
People complaining about the thermal paste pattern, the heatsink presses down with enough force that any pattern will be completely lost. It matters more how much than the pattern. For how much there's a wide range of OK. Too little could be an issue, but someone is unlikely to put too little. Too much is just messy.
There is pretty much no such thing as too little, a tiny dab in the middle is all you need.
There will be air bubbles with this pattern.
Why does anyone even care about patterns. Just spread it with a piece of paper or something
13900K + 4060TI
Well played!
человеку просто нужна вычислительная мощность компьютера а видеокарта только для передачи изображения к монитору
@@Kirill_rarвстройки хватит даже на 4к вывод.
4060 ti 😂
B760+K cpu
@@BatkoNashBandera дополнительный нагрев итак горячего процессора
the pro art motherboards and gpus are just so beutiful =)
My dream bro very satisfying video good job ❤
That ILM application made me fucking wince. It's supposed to be a precision installation, not "just screw it fully in".
Was about to comment the same. Dude went at it with an impact screwdriver 😂
Bro what kind of cpu gpu combo is that 😅😅
Exactly 👍
probably isn’t for gaming as it also has 4 sticks of ram rather than 2 higher capacity ram sticks so that it probably shows that it has maxed its capacity.
It's fine wdym?
@@topsecretcoding353 that CPU is way too strong for for that GPU. Cutting cost on the CPU for a better GPU will result in a much higher FPS per dollar spent for the same price
Thr combo which explodes
Very nice and clean build, I like the lack of RGB
I remember back in the early nineties us ICT techies prefered Compaq over AST because of their build quality. 10 years later, there were no PC brands that gave a damn. Make it cheap and barely usable, slap on windows on it and call it a pc.
That cable Management 😍
People don’t understand that not everybody is a gamer. For video editing this configuration is great
Would a faster GPU be preferable? Especially cuz of the bottleneck?
Finally, someone who gets it!
Thanks for this video so satisfying.
Using power tools on a pc build makes me nervous. I know the guy is a professional but I'd be way too scared.
Mine has torque limits. Know your tools.
that's such a satisfying way to hide the wifi antenna
I don’t see it working very well.. it’s in a metal box
@@MrJord1994It should work fine, because this type of metal can't make a good shield for antenna signal
@@piteftSteel?
Bro really meant “Don’t judge a PC by it’s case”
My Goodness! Finally someone who ACTUALLY does cable management :)
people are saying it’s a bottleneck and shit, but a 4060ti is all you need for AAA games.
Yea, but why not just go all out when he already has one of the most expensive CPU out there.
No it ain't gonna run in 4k why buy an expensive processor when you can get a cheap one
@@ank30220a lot of editing software requires a beefy cpu rather than gpu so it’s probably made for editing
Its not a gaming pc
@@Truck-kun_01maybe he didn’t have all the money for a full pc and is going to sell the 4060 and upgrade later on?
Everyone is talking about the price to performance and the bottleneck but the real tragedy is that he's using a 139000k on a B760....
I didn’t even realize😂
Bottleneck will love this man fr 😂 editing's gonna be fine though
No Bottleneck will occur. The CPU is way too good compared to the GPU for a bottleneck to occur. A bottleneck will happen when the CPU can't keep up with the GPU.
@@bigmonkedongbud..... You can't be serious?
@@bigmonkedong
Sorry to say that you are wrong. But bottleneck doesn't occur only when CPU is not the same level as GPU.
It can occur with any components, your RAM can bottleneck your pc or your monitor.
Bottleneck occurs when any of the components in the pc are not of the same level.
@@abhilashs2264 You are right, I only meant that this kind of "bottleneck" does not affect gaming negatively and gives the gpu space to run at full load
Y’all are acting like it’ll bottleneck it at 50%
It looks clean af, the process especially
Bro the case❤❤❤❤
QUE UM DESSE CAIA DO CÉU PRA MIM, AMÉM
dont use electric screwdrivers on circuit boards, they might damage the board
I think as a professional pc builder he knows what's right and wrong
@@scr3am273 And just because it's a comment on RUclips doesn't mean it's not coming from a professional in the area. Although, yeah, not an issue at all, same thing as a normal screwdriver, don't stab the mobo and you'll be gucci
@@zekihvh maybe he is, but maybe you have noticed that in comments everyone acts like they know everything better, always giving useless advices and criticisms.
@@scr3am273they clearly do not. They paired a K series processor with a B series motherboard. They paired a 60 series GPU with a i9. They populated all the memory slots, when unless you use a fuckton of memory is advisable to use exactly 2 sticks.
Cable management was professional level tho, that's undeniable
@@scr3am273because we do. You can go check specs, reviews and manuals of all the components.
That is just so satisfying to watch. Saw it loop 4 times before I realized.
That’s nice boot up sound 😂
Bro literally called me poor in 69 different languages
NAHHH 💀
Never seen someone assemble a computer with power tools before
clean bro. Well done.!
Customer should've bought the Z790 Creator Wi-Fi instead of the B760 since they got i9. Note that the i9-12/13/14900K needs a Z6/790 motherboard, because of the VRMs. And the ProArt RTX 4080 or 4070 Ti would fit better
Not just the VRMs, also because Intel locks down overclocking on non-Z motherboards. So that K loses like half the pros for 10-20% more money.
Термопасту Лопаткой Размазать Забыл...!!!😂😂😂
Вот серьёзно смотришь на других и ах..еваешь😂
You don't have to spread it. The tightening off the AIO pump head will spread it.
This bro assembled a computer so that this music would play at the end 💀💀☠️💀💀💀💀💀
There is nothing easier than assembling a PC 😅
This is ASMR until the music came out
Why in the hell did you combo a base GPU with a flagship CPU? Also stop being lazy and hand tighten that's just poor practice
Putting thermal paste like this should be an instant ban from ever building anything in the future again.
nothing wrong with the paste. but id be more worried about screwing in the contact frame with a power tool
Way too much
G FoR GrEaTeSt tEcHnIcIaN ThAt eVeR LiVeD 😅
It's so nice to not see any RGBs
حقاً هذا مذهل 💯👏
13900k with 4060ti gives me facepalm. You could build with 4090 in the same price range. AIO isn't mounted at the front. With this budget you could've bought Arctic freezer 2 with 0db fans, no rgb plus socket cooling.
No rgb, full black 🤤🤤
4060ti with i9 brooo
thats completely fine if you do more cpu intensive tasks
☠️
Noone said its a gaming pc
@@immersenfdazugeber-aberk-tw5leit's for editing your right
@@BridgetownGDWhich is 5% of tasks 🗿
Very neat build bro,
"That's done, 100,000 dollars from you "
Планка для процессора, 4 планки памяти, вода на верх - инструкция о том как не надо собирать компьютер
сиди дальше на своей rx580
@@zxcFROа ты на коленях у своего парня 😂
планка для процессора - чтобы улучить контакт для охлаждения.
4 планки - ну хочет он больше памяти, значит надо, тут проблем не возникнет.
водянка на верх - продлевает жизнь водянки за счёт воздуха которого просто останется сверху и не мешает насосу, И помогает видеокарте охладиться, хоть и температуры процессора будут чуть чуть выше (НО не во всех случаях, иногда водянка лучше работает сверху).
компьютерный гений, сиди дальше на ксеноне и китайской материнке, и плачь о том, чего у тебя нету.
@@revi5343 у меня на сухой воде стоит ляпота!
@@revi5343 видимо ты ддр5 не собирал никогда. с четыремя плашками даже быстрая 6400 память на чипах а-die может завестись только на 4800 без ошибок. край 5600 будет с конскими таймингами. 4 плашки ставятся только если 128-256 гигов оперативы надо и по другому это не сделать.
Sounds like your assembling 1 serious weapon 🎉
Отличное решение спрятать антенну wi-fi в металлический короб 😂
"Пробьет" :))
Она вроде как под пластиковой сеткой, но даже если металл, то у меня вифи на матплате хорошо работает даже без внешней антенны вовсе.
По сравнению как он термопасту намазал, антена в корпусе это херня. А вот то что видяха в верху стоит , где весь жар собирается я вообще не пойму.
@@fidelio9788паста раздавится и равномерно распределится, лишнее выдавится. Видяха стоит там же где и у всех, а сверху стоит трехсекционная водянка.
The wifi antenna had me passing out like a teen at a micheal jackson concert!!!
Bap re kash mery baba ya bary bhai hoty to said mjy b dila dety 😊 chlo koi bt ni dkh k he khush hoty han❤
that cable management job was perfect how much do you want for the pc
makes me want to build a new computer...and it doesn't take much for that to happen. great video
Never been easier to build a pc.
That measuring method was chef's kiss
Almost perfect. Lazy thermal pasting technique.
Lider da sala maycon abel sala 4 ano janice
5ano priscila pedro herenqui ... numero da matricula )].