Another technical automotive instructional video Sir Tim. With my shitter, i have a supply of cable ties to refix the bottom as the bolts are there but the plastics are fucked........next time it comes off will be when i get a new rad 👍
@@flapsfalkland5181 I keep a door pocket full of the shitters. The equipment you’ll need in the door pocket of the Transhaggers is probably a mig welder and a welding mask 🤣
When i was trying to put the undertray of mine back on today 2 screws just wouldnt tighten? So a nice new red raw plug got pushed up into the hole first and problem solved !!
Fixed is fixed 💪 Was it the two corner screws by any chance? The plastic but it threads into pushes up out of the way if you don’t get it perfectly lined up.
@@aleksandergjengst782 a little, but not as much as when I made a full blown sik ram air intake 🤣. I made a video of both, this is the cold air feed one ruclips.net/video/nYeXN-1TCtQ/видео.htmlsi=BtD0DluLxo055hsx
@@StupidBlokeStupidVideosIt's a brand new bracket and bumper, they're all fine, the bumper seems like it doesn't stretch far enough under the headlight to clip in
Hi mate. Just whatever fits and what you like tbh. I fitted led spot lights/fogs to mine but the beam could be much better ruclips.net/video/1x_8zNwg6RU/видео.html
@@StupidBlokeStupidVideos yes i cant find no videos because nobody has got it installed on c1 or aygo. If the beam now is not good u may drop a video of how to install a bar light.would be usefull attached to highbeam .thats the plan.
@@RAMANOFFICIAL1 it would be very similar to the job of fitting the spot lights but probably mounted to the bonnet instead? If I get hold of one cheap one day I’d love to fit one
This bloke is great, he’s a cross between Guy Martin and a Wigan pie muncher, so down to earth yet quite informative.
Nice one 🤣
Another technical automotive instructional video Sir Tim. With my shitter, i have a supply of cable ties to refix the bottom as the bolts are there but the plastics are fucked........next time it comes off will be when i get a new rad 👍
Good luck. Cable ties are often my go to equipment when attempting such a task.
@@StupidBlokeStupidVideos always handy to keep a stock of 👍 not sure when i will be doing the rad yet, too busy with two transits 🤣🤣🤣
@@flapsfalkland5181 I keep a door pocket full of the shitters. The equipment you’ll need in the door pocket of the Transhaggers is probably a mig welder and a welding mask 🤣
@@StupidBlokeStupidVideos tru dat 🤣🤣
Loving the one handed approach to every job ... Skills!
Skillz 😂
ambassador ,,, you are spoiling us ,,, two in the same weekend ,,,
this is better than
a pyramid of Ferrero Rocher
Hahaha ffs
Surprised you didn’t add 3 more intercoolers while it was off
Sounds like a plan 🤔
A 3 branch, I feel a run round the Nuremburg ring coming soon.
I don’t even have a passport 😕
Great video, thanks!
Thanks mate
Also check behind the front number plate. In my case there was a screw there.
I’ve never seen that before. Someone rammed a tech screw into yours?
@@StupidBlokeStupidVideos Yes, through the bumper and into the metal support beam that is behind it.
have you a link for new replacement clips that fit under the wheel arch. Also the clip that fits under bonnet the one clip ?
No mate but they are just plastic rivets of various sizes. You can buy a selection of them in a kit off eBay last time I looked
Hold on a minute, I spied a three branch manifold. Is there a vid soon ?
Well spotted, it will be an upcoming vid in a couple of weeks or so
Pretty easy
These are east cars to work on, that’s what I love about them
When i was trying to put the undertray of mine back on today 2 screws just wouldnt tighten?
So a nice new red raw plug got pushed up into the hole first and problem solved !!
Fixed is fixed 💪
Was it the two corner screws by any chance? The plastic but it threads into pushes up out of the way if you don’t get it perfectly lined up.
Did u notice any difference after making that air intake at the front??😊
@@aleksandergjengst782 a little, but not as much as when I made a full blown sik ram air intake 🤣. I made a video of both, this is the cold air feed one
ruclips.net/video/nYeXN-1TCtQ/видео.htmlsi=BtD0DluLxo055hsx
@@aleksandergjengst782 this is the ram air intake which was definitely noticeable
ruclips.net/video/rwpwg0dnC58/видео.htmlsi=cJ0FPVPenhVgYuhg
2 videos in 2 days?
YES!
Don’t get used to it though 😂
Thanks pal 👍
You’re welcome mate 👍
Job Well Done.
Got there in the end lol
My passenger side doesn't want to go in or even line up, drivers side is fine but it's like the other side isn't the right shape
@@jxmes6476 the clips are probably broken. Not unusual on these tbh
@@StupidBlokeStupidVideosIt's a brand new bracket and bumper, they're all fine, the bumper seems like it doesn't stretch far enough under the headlight to clip in
@@jxmes6476 oh, not sure about that one without being able to see it tbh.
@@StupidBlokeStupidVideos Can I send you a few pictures via DM?
Tim, Has someone nicked the Cat and replaced it with a Piper ?
I knew someone would notice haha
Hi I'm planning to put a led light bar behind the bumper any suggestion? Size location etc.
Hi mate. Just whatever fits and what you like tbh. I fitted led spot lights/fogs to mine but the beam could be much better
ruclips.net/video/1x_8zNwg6RU/видео.html
@@StupidBlokeStupidVideos yes i cant find no videos because nobody has got it installed on c1 or aygo.
If the beam now is not good u may drop a video of how to install a bar light.would be usefull attached to highbeam .thats the plan.
@@RAMANOFFICIAL1 it would be very similar to the job of fitting the spot lights but probably mounted to the bonnet instead? If I get hold of one cheap one day I’d love to fit one
@@StupidBlokeStupidVideos fantastic 👍
A massive pain that bumper.
It can be, especially doing it one handed and when the corner the clips don’t pop right 🤣
Shitter 😂 brilliant top man
Cheers mate 😆
I hate those plastic clip things citroen use. Always break
Especially when you have to remove the bumper every time you need to work on the shitter
Yeah lol
See Flaps 😅😅