Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U (2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼 Thanks again my Brother from another Mother!
What are you talking about? There was no reaction from the TV when either side cable was unplugged bar a split white and black screen. How dishes assume the right hand connection was loading?
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
It will work but not all the time. Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Should the left connector when connected have displayed a picture here? I cannot see any difference here between either cable removed. How did he know the right hand cable when inserted on its own was a problem?
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
Thanks. Please what are the characteristics that will help one to know that the problem is either due to a missing COF voltages or a short on CKV LINES?.
Why is there 8 clock signals? Can you explain how he knew it was the right side connection that was loading down the tcon board? With either cable connected on its own all that was displayed was a split white and black screen but most distortion or bars on either occasion.
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
What signals or voltage are you blocking. So by blocking certain signals/voltages as you show in this video, how does the panel continue to work then? Can someone point me to a video to explain this.
How come when you block that tracez the signal still comes through iver the whole oanel. When you taped the first tracez we saw partly signal. But when you arjusted the tape, it seems to be fixed. I wonder how its possible the signal still goes through the whole panel side, when part is blocked
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
This apparently explains everything yeti cannot understand anything about this video. One would have thought that once he connected the cable on the right on its own that he would have got the distortion on that corresponding side of the screen no?
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
Another great instructional video, My customer has a Sharp LED LCD TV LC-50Q7000U
(2018) model basic smart tv with the same problem - cover pins 1thru 8 with electrical tape does the job every time 😎- language has no barrier in understanding electronic AC/DC principles 👍🏼
Thanks again my Brother from another Mother!
What are you talking about?
There was no reaction from the TV when either side cable was unplugged bar a split white and black screen. How dishes assume the right hand connection was loading?
It’s works, it’s really works! you just need to cut the right pins.
This just worked for me. I didn't understand what you said but understood what you did. Thank you 🙏🏼
I can't believe it, it works for me as well on an Phillips ambilight TV
Thanks you so much !
Legend!😱💪🏼✨ Almost wanted to throw my tv away but this was the fix 🎉
How was this a fix?
Can't believe my eyes. Fix my Akai 65 inch TV. Tv i almost threw away. Love u bro
Good Job bruh ....i enjoy your work....???🥰
Work is good,thanks for sharing sir,watching from the philippines..
I don t know how this sorcery works but it worked for me as well god bless
Great fix getting more common that fault is now I’m getting so many dead screens
What the heck how the crap does that work? Why wouldn’t that part be covered from the factory on every TV. I’m no TV repair expert but this seems fishy.
Cuss or don't try
It will work but not all the time.
Also, there is no settings on factory mode to fix it because it is a hardware issue. And if there happens to be, you still cannot adjust it because the factory mode OSD won't pop up.
Should the left connector when connected have displayed a picture here?
I cannot see any difference here between either cable removed.
How did he know the right hand cable when inserted on its own was a problem?
Awesome video,i have repaired 3 tv`s in a short time with the same problems and others who had bad led strips.............
Thank you very much, sir, for the useful explanation. I have the same problem with my Philips 50 TV. Please help
Me too did it work for u?
My tv hisense smart tv got one line of horizontal line and one black line or vertical line it's gone be fixed
What is the logic behind this repair? How it is possible to fix the screen while blocking signals?
เรียนซ่อม อิเล็คทรอนิกสื แล้วจะรู้เอง มันเป็นการปิดกั้น vgh vga ฝั่งที่มันช๊อตกันไง
Thats what I would realy like to know
Think there is a short on the screen and this is blocking one side of that circuit, preventing the short from completing. Usually this takes trial and error blocking different sections of the ribbon cable to find the bad section.
Although ultimately the tv still has a short - and a potential fire risk but yes it works - I have a Hisense 50” doing the same but I’ll scrap it as I’ve ordered a new tv with 2.1 hdmi - but nice video m8
and not speaking English
Thank you sir. Was able to fix my tv
Thanks. Please what are the characteristics that will help one to know that the problem is either due to a missing COF voltages or a short on CKV LINES?.
my TV also same problem will try and revert u sir
Nice information sir 👍
Grazie per il tuo prezioso video!
thanks sir very best video very best knowadge video hi
You're a master!
Спасибо за ваши знания
Agradeço pela dica, minha televisão voltou a funcionar
Bravo shqipe
Good work friend👋
Show as and tell us how many pins on the ribbon that u blocking the signal from t- con board...what are the signal u have blocking?
8 lines
@@chronikhavok3407 what signal he has blocked ?
CLK signals
Why is there 8 clock signals?
Can you explain how he knew it was the right side connection that was loading down the tcon board?
With either cable connected on its own all that was displayed was a split white and black screen but most distortion or bars on either occasion.
Thanks 👍❤
How many lines should i cut... I have Omega 40inch is doing the same
Amazing review 👍👍👍
Pershendetje zotri nje pyetje nqse me lejohet kur hoqe tenien e pare pame nga nje krahe e bardhe dhe tjetra e zeze dhe kur hoqe te dyten po e njejta gje por e kunderta ku kuptohet qe fain e kishte e dyta dhe ku mund te vendosesh tenien faleminderit
I ke 2 lidhse majtas djathtas. Cilen e largoj nuk pat drit dmth zi
I'm coming watching your video
Thank youuu❤❤
good job mate.
What signals or voltage are you blocking. So by blocking certain signals/voltages as you show in this video, how does the panel continue to work then? Can someone point me to a video to explain this.
thank you
Ek baar factory reset krke try kr lena kuch cases mai kaam kr jata hai
Well done! Thanks.
just because the fuse is ok it does not mean the TCON is ok.
The language barrier made it difficult for me to understand how he goes about fixing the problem.. Anyway thank you.
Fantastic it worked thank you! But i have some slightly visible lines how do I know with numbers of lines to cut. Thanks!
Très bien 👍👍
It works👌👌👌
THANK YOUU
I want to know how many line on the flex you put tape on
i dont know what you said but i understand
how many pins you cover??
Beautiful
How come when you block that tracez the signal still comes through iver the whole oanel. When you taped the first tracez we saw partly signal. But when you arjusted the tape, it seems to be fixed. I wonder how its possible the signal still goes through the whole panel side, when part is blocked
Really beautiful..
Beautiful in the fact it makes no sense?
Excellent 👍👍
Boa 👏
Guerreiro caso o amigo esteja querendo salva a TV de uso próprio e economizar SHOW, RECOMENDO, porém caso seja um técnico iniciante com pouca experiência e pegou aparelho de cliente, não tente, infelizmente em 95% casos o televisor apresentara defeitos em menos de uma semana.
so did the trick with the tape,worked perfectly,however after about an hour the picture is overtaken by another picture,while its on in the background and then its on a loop every 30-45 seconds.any ideas???????????????????
try to cover more lines. if it doesn't work, try to cover less lines
How did he know what side was shorting out?? I expected to see bars when he connected the right hand side on its own.
Hello my friend
Thanks very much
Ma bravo i kod mene proradilo samo sam previše stavio trake pa malo jebe hdmi..ali bravo
Yes
To this day, manufacturers haven't resolved those shitty lines on the screen
My LG 24' IPS LED PC screen has the exact same problems like this tv
Can it be fixed ? And if If it can , Can I fix it by myself ?Thx !
wow !!! perfect
You please make the writing clear because I following you
Beautiful❤
Ako vedel ze ma zblokovat tu cast a kolko pinov zablokovat ?
Good job!
beautiful
Good job
Hi all, What the port called at the bottom of the screen? It connect to the t con board and then run a ribbon across 4 different skinny boards
Merci sur un téléviseur j'ai déjà vu que cela avait été fait et maintenant la panne est revenu.que dois je pour revoir les images.❤❤❤❤
Wery well.❤
BRAVO
👍👍 16 👏👏
Have a Insignia 55df710na19 changed the led strips now have a line down the middle of the screen can you help !
Thanks
Uhhhh I don't think I can watch TV again because my TV is a flat screen TV and it's huge
Wanderful
Does this method works for any tv?
if it is a defect for most TVs, yes
Здравей, къде се загуби ? Хубави клипове и полезни правиш
Hello, do you have a good idea for how to remove a philips tvc screen that is glued. I just broke a Philips TV 50pus screen, it was very firmly glued and used a plastic card to free the glue. There was a corner very difficult. The result is the screen is broken. Do you have a really good idea for how to peel off a firmly glued TV screen without it being damaged. Many thanks for your help.
Heatgun
Some like tv JVC smart tv 50 inch please help me
Eccellente
I need à help please. I have vertical liens on m'y tv (smart 32 pcs) screem.
When I folow you exemple my screem became black
Oh nice
I tried this but it didn't work for me
amazing
nice
My tv same Hisense 55” shows white can this fix it too ?
Good
I wonder which language he does speak? And what is the explanation for the fix?
albanian
What if I have this with picture? How do I repair?
How do I know what ribbon is causing the issue?
This apparently explains everything yeti cannot understand anything about this video.
One would have thought that once he connected the cable on the right on its own that he would have got the distortion on that corresponding side of the screen no?
What don't you explain please ?
👍👍👍👍👍
What is the explanation?
@BLACK NIGHT yes. But with the added tape, the pins don't make contact any more in the connector
@@khalkhal2372 I guess these pins caused a short and error in tcon board. When covered they dont make contact with tcon board so no short (or fault) detected.
@@Tsjoetenbille " I guess ?
@@pascalphase2556 Well, it’s a common fix. Many video’s on this topic. It bypasses the clocksignal to the panel. But i’m not shure what causes the fault.
Спасибо за ваши знания
Location mo boss?ganyan din ang sira ng tv qu
Malapit lang boss, russia
Well
🙏👍
Mine audio went off tried all but nothing works
Super sir
new sub her ..thank alot
Plz unlock your subtitle.