Surging lawnmower Engine - How to fix - Briggs and Stratton Plastic Carb
HTML-код
- Опубликовано: 16 сен 2023
- This is a quick and easy guide for repairing a lawnmower that has a hunting or surging issue caused by a partially blocked carburettor. This may also fix a lawnmower that won't start at all if the jets are completely blocked.
Carb cleaner spray (preferred choice): amzn.to/44ILH7j
WD40: (Goes further): amzn.to/44KslyH
Plastic carb jet assembly replacement piece: amzn.to/3RgP1Dv
Complete replacement carb: amzn.to/3LeLDW0
Thanks for watching! If you found value in this content, please don't forget to like and subscribe for more videos.
Disclaimer: This video is meant as a guide only and I don't accept any responsibility for damage or injury caused by following this video. Be sure to wear the correct PPE and work safely. Хобби
fast and to the point. Excellent video. Thanks Turners World.
Nice video. Plastic carbs, imagined that 20 years ago!
Thanks mate, the future is here! 🫣
VERY GOOD STEP BY STEP DISSASEMBLY AND REBUILDING EASY TO FOLLOW
Thank you! 😊
Thanks for thr video, i've literally tried everything other than cleaning the carb (full service, new plug, blade, air filter and lastly 99 ron petrol) . I have even fitted a new copycat carb but it also does the surging, so frustrating. My old briggs classic starts first time, everytime and I rarely service the thing!!
Nice fix
Cheers mate 😊
Nice video - thanks
Thank you, no problem 😊
Great stuff, does the air filter still need to be washed and when dry oiled like on the older mowers ? Many thanks.
Yes mate, same as any sponge filter. Clean and then a light coating of oil. Apologies I should have mentioned that 👍🏼😁
When I used to trade in them it was always the case but I've never worked on these plastic carb type. I thought maybe they had done away with it, I guess the plastic is so much cheaper than a metal carb but do they last like the old ones I wonder. Many thanks.@@TurnersWorkshop97
Was that an engine swap or is it apost to look Like that
That’s the standard engine for the mower I believe, quite big for a small deck 😂
I did exactly as you said , Carb' was spotless ,Pipes cleaned and checked, changed old fuel ,then had to put new carb' on as still hunting?? changed plug , changed fuel cap, new filter,primer perfect??? why the hell is it still surging,?? I give up;as I've double checked everything. Help.
Run some torch cleaning tips thru every hole in the carburetor and open up/clean very good the main jet. Should solve your problem, if not I'm here too help
The pipe with o ring next to pilot jet does it have a hole in, or is it completely closed please
They run so lean for efficiency it might be worth opening up the main jet slightly. Failing that a replacement main jet assembly isn’t too expensive.