BUY IT HERE!: globalcommerceca.com/ Thanks to all those that have donated to the Channel! Members area link! More tools will be added daily! Check back often! email me for list! globalcommerceca@gmail.com drive.google.com/drive/folders/1NdWmuM8UnU35dpULy9sWXWvPXQnYd6PC?usp=sharing Support this channel for the best automotive secrets on the internet! A Donation of $25+ gets you full access to the members area! Please send donations to the channel here: Cashapp donations $GCDT Zelle globalcommerceca@gmail.com Venmo @Louis-Roberts-26 PayPal nroberts09@gmail.com
To whom I'm commenting... usually the lightning bolt on the board comes on after cloning or programming another computer. It's just a matter of clearing codes and programming the throttle body. What good videos I like to see the equipment you use. You are always updated. a big greeting. from Mexico.
THAT WAS AWESOME ,,,,, I AM DEFINITELY BUYING A DC706 FROM YOU FOR THE GREAT SERVICE THAT YOU GIVE THANKS AND PLEASE KEEP UP THE GREAT WORKS !!!🙏🏽👍🏽👍🏽👍🏽
I never skip through your videos. I'm learning a lot of techniques. I've done this with PC boards before with EEPROM readers. I've taken GPU's and flashed the EEPROM to enable features and boost clock speeds to a higher tier card. The manufacturers used to dumb down lower variants of cards and all you had to do is copy the BIOS from a higher end card to a lower end model. They started making multiple chips now instead of using the same chip and cheapening up components and running a slower dumbed down BIOS.
Wow, that's awesome to hear! It sounds like you have some serious skills with EEPROM readers and flashing BIOS on GPUs! The changes in design with multiple chips definitely make it more challenging now. Your experience really highlights the creativity and technical know how that goes into modding hardware. Keep up the great work! Like and Subscribe!
Yes, all available on our website: globalcommerceca.com Also check my full review of tool here: ruclips.net/video/aUpWIC0r1pg/видео.htmlsi=eWZAweavZNn9sYxF
How are you dear please help me with information about the p706 device with a Jeep control unit and I will send you a picture of the control unit for a Jeep car manufactured in 2019. Is it possible through the program extraction device and unlocking for programming with the HP Tuner modification device? If it is possible send me a method for me to apply it. Thank you for your help. In any case, I am from Iraq and my name is Anwar Al-Rubaie
Hi Alex ecuflasher is an old version of pcmflash, it does not support GPEC2 and is unstable, I have it and the new version pcmflash.. OBDSTAR DC706 Support many modules to clone without opening as well. Thanks for watching 👍🏾
BUY IT HERE!:
globalcommerceca.com/
Thanks to all those that have donated to the Channel! Members area link! More tools will be added daily! Check back often! email me for list! globalcommerceca@gmail.com
drive.google.com/drive/folders/1NdWmuM8UnU35dpULy9sWXWvPXQnYd6PC?usp=sharing
Support this channel for the best automotive secrets on the internet! A Donation of $25+ gets you full access to the members area!
Please send donations to the channel here:
Cashapp donations $GCDT
Zelle globalcommerceca@gmail.com
Venmo @Louis-Roberts-26
PayPal nroberts09@gmail.com
To whom I'm commenting... usually the lightning bolt on the board comes on after cloning or programming another computer. It's just a matter of clearing codes and programming the throttle body. What good videos I like to see the equipment you use. You are always updated. a big greeting. from Mexico.
THAT WAS AWESOME ,,,,, I AM DEFINITELY BUYING A DC706 FROM YOU FOR THE GREAT SERVICE THAT YOU GIVE THANKS AND PLEASE KEEP UP THE GREAT WORKS !!!🙏🏽👍🏽👍🏽👍🏽
I never skip through your videos. I'm learning a lot of techniques. I've done this with PC boards before with EEPROM readers. I've taken GPU's and flashed the EEPROM to enable features and boost clock speeds to a higher tier card. The manufacturers used to dumb down lower variants of cards and all you had to do is copy the BIOS from a higher end card to a lower end model. They started making multiple chips now instead of using the same chip and cheapening up components and running a slower dumbed down BIOS.
Wow, that's awesome to hear! It sounds like you have some serious skills with EEPROM readers and flashing BIOS on GPUs! The changes in design with multiple chips definitely make it more challenging now. Your experience really highlights the creativity and technical know how that goes into modding hardware. Keep up the great work! Like and Subscribe!
Amazing explanation to this procedure. Thank you
Could you buy blank eeprom chips and put in the donor ecm to have a blank vin? If you didn’t have a cloning tool
can you unlock the gpec 2's with this? So they can be tuned with hp tuners? if not do you now how to unlock the gpec2's for tuning?
????
Have you ever had a gpec2 have the can bus low working but getting nothing from the can high what would that be
watch the video again and watch all my gpec2 videos carefully
Wouldn't it have been easier to get the correct ECM to match the engine and transfer the pin with an IM608? we do it all the time.
Yes you can adapt a similar loaded ecm that way, but this is the way to do an exact 1 to 1 Clone of the ecm.
That tool looks fantastic wish it wasn’t so expensive. What other option would you use?
For our cheaper option check our website here: globalcommerceca.com/products/gdi-cg-fc200-ecu-programmer-isn-obd-reader-v1-1-6-0-w-new-adapters-set-6hp-8hp-msv90-n55-n20-b48-b58
Hi Guys , Does the Obd Star 706 write to brand new Blank
OEM Units
Yes
What's the price for this equipment?
Do you have a list of models or vehicles it can do?
Yes, all available on our website: globalcommerceca.com
Also check my full review of tool here:
ruclips.net/video/aUpWIC0r1pg/видео.htmlsi=eWZAweavZNn9sYxF
Any cloning solutions on Audi and VW's?
Yes, the dc706 supports many of those, I've got some videos coming up soon.. stay tuned!
Dónde está la lista de ecus q lee ?
Entiendo que buscas la lista de ECUs que se leen. Podrías encontrarla en la descripción del video o en los enlaces que se mencionan
Can this change current and original vin?
Ir would require manually editing the vin in hex and writing it back but yes..
How are you dear please help me with information about the p706 device with a Jeep control unit and I will send you a picture of the control unit for a Jeep car manufactured in 2019. Is it possible through the program extraction device and unlocking for programming with the HP Tuner modification device? If it is possible send me a method for me to apply it. Thank you for your help. In any case, I am from Iraq and my name is Anwar Al-Rubaie
good, I recommend checking forums or resources specific to Jeep tuning for detailed guides and methods
👍
Hey buddy!
You never reply to my email i really appreciate the thing that you share with us.
Big up brother
Sorry we'll get to it, we get a lot of messages
Hi I have Alex ecuflasher... read and write flash and eeprom with j2534 device obd and bench...without open ECU..😏😏😏
Hi Alex ecuflasher is an old version of pcmflash, it does not support GPEC2 and is unstable, I have it and the new version pcmflash.. OBDSTAR DC706 Support many modules to clone without opening as well. Thanks for watching 👍🏾
@@globalcommerce7654 Yes. I just use Ecuflasher to read old PCM, is a very good tool to read the GPEC2 flash and eeprom.. without open the ECU.