I run the K10’s. Been very happy with them. The K20 is the same amp with a unlock card boosting it 6,000 watts. At full load and low Herts it will run out of steam. Where as the K10 can maintain rated power. But I also only do live sound production “ Bands” the low end is not as continuous. Thanks for the video. The other amps look promising I may have to try one. The Powersoft amps are very pricey.
Thanks for that demonstration it was very informative and totally help me to make a decision to seek out the Ad42. I'm not just trying to sound loud I'm really trying to get the deeper low bottom in, I respect the power soft but I agree with the lady I too always felt that the tone was too high for true bass and the base reflect sounds responded too fast for real ground shaking sub bass! It's more like a punch base then earthquaking base.
Hello, I have used the Ad442, I am just about to buy an amplifier but I am still undecided if the ad430 or the ad442, I would like to know your opinion about it.
I am an importer of Admark Audio here in Nigeria. ADMARK is doing great in amplifiers and line array speakers. Their Ad422 is one of the beat 4 channels amplifiers.
greetings, how good was the amplifier for you, the power quality and is it worth buying that amplifier, Admark models how long have you been using it, have you had any failures
Thanx for sharing videos. Why don't you make measurements using pink noise & software like smaart? Or even some smartphone app's can do good measurement job. That can up you channel on next level
I'm thinking to try a powersoft Q3002 4ch amp for my top end. I have 13x 1" compression drivers per side. Currently using a QSC CX404 but it's not really 2 ohm stable. Not such an issue driving just 1" compression drivers though. For bass i use 2x MC2 T2000 with the old linear power supplies! Heavy but phat and reliable. I used to use Lab's fp6400 and QSC PL6 but the power supplies keep blowing!
The powersoft k20 is more expensive but you have to remember is programmed amplifier DSP and is capable of doing way more, the Powersoft x4 and 8 are a step up again from the k20.
@@JoshL1976 ,,for me,,the opposite..did not rate the x series for tone..the x series has much better sounding tone and roll off..just my opinion..bless up
Did you know that the bottle testing for bass is a old school thing, and it is very accurate, if the bass is right, the bottle will stay there all night and day with out falling off, if it falls off the bass needs to be tuned correctly, just a pointer
Bass that's out of sync will need phase correction. Perfect bass will not only cause a bottle to fall but will cause humans to fall also. These amps have circuits built in that create the appearance of a warmer bass tone. Not puchy as the old 5000 crowns.
@@jcruiz49 Now the K20 is better built and more reliable but the AD 42 definitely does a great job at a lesser price. Just make sure you test it as soon as you get it.
I think this is the only place where the person who puts the video out interacts with his audience in the comment section.👍🏽👍🏽
Thanks🙌
AH TRUE 👏🏿👏🏿👏🏿
He's speaking the truth... Admark has a fuller deeper more illuminating bass and at that price I'm in love with em
I run the K10’s. Been very happy with them. The K20 is the same amp with a unlock card boosting it 6,000 watts. At full load and low Herts it will run out of steam. Where as the K10 can maintain rated power. But I also only do live sound production “ Bands” the low end is not as continuous. Thanks for the video. The other amps look promising I may have to try one. The Powersoft amps are very pricey.
Yes powersoft are nice and efficient amps. Thanks for watching
Uut
What happened to crown, crest, Lab Gruppen? Don't tell me i have been away from this sound business sooo long, lol
The K10 cannot upgrade to the K20. The K20 is its own in the K series - cannot unlock to a K20. K2 > K3; K6 > K8 > K10; K20.
Thanks for that demonstration it was very informative and totally help me to make a decision to seek out the Ad42. I'm not just trying to sound loud I'm really trying to get the deeper low bottom in, I respect the power soft but I agree with the lady I too always felt that the tone was too high for true bass and the base reflect sounds responded too fast for real ground shaking sub bass! It's more like a punch base then earthquaking base.
Im glad it's was informative- I know the frustration of searching for videos of equipment and not finding what I'm looking for...thanks for watching 🙌
Thanks for taking the time to make this video. Greatly appreciated
Hello, I have used the Ad442, I am just about to buy an amplifier but I am still undecided if the ad430 or the ad442, I would like to know your opinion about it.
However they criticise china amps on the other i think admark and cvr are doing a betters job. Big amps , better prices . Bigups to them
I am an importer of Admark Audio here in Nigeria. ADMARK is doing great in amplifiers and line array speakers. Their Ad422 is one of the beat 4 channels amplifiers.
greetings, how good was the amplifier for you, the power quality and is it worth buying that amplifier, Admark models how long have you been using it, have you had any failures
Where do we send broken Admark amps for repair when they stop turning on?
Thanx for sharing videos. Why don't you make measurements using pink noise & software like smaart? Or even some smartphone app's can do good measurement job. That can up you channel on next level
I can look into that its a good idea -- we are just use to our ears being trained to hear what we looking for
I'm thinking to try a powersoft Q3002 4ch amp for my top end. I have 13x 1" compression drivers per side. Currently using a QSC CX404 but it's not really 2 ohm stable. Not such an issue driving just 1" compression drivers though.
For bass i use 2x MC2 T2000 with the old linear power supplies! Heavy but phat and reliable.
I used to use Lab's fp6400 and QSC PL6 but the power supplies keep blowing!
The powersoft k20 is more expensive but you have to remember is programmed amplifier DSP and is capable of doing way more, the Powersoft x4 and 8 are a step up again from the k20.
As an ex powersoft dealer who installed a ton of them . They sound off X series are junk and overpriced
Admark is also available to ship with DSP (made by a German company, alldsp). Powersoft surely has the higher performing DSP and software.
@@JoshL1976 i would like to hear more, are you making that comparison to the k series?
@@JoshL1976 ,,for me,,the opposite..did not rate the x series for tone..the x series has much better sounding tone and roll off..just my opinion..bless up
Q tal cvr con Dsp 3004 vs admark ad442
Hello, do you recommend the amplifier, admark ad42?
Great demonstration , but you know what i wonder how the cvr would preform in that demonstration.
Yes that would be a good one also..
Los amplificadores cvr con Dsp también entra aqui en ezta prueba que tal dsp
What Ohm you play your subs on ?
4 ohm
Bass is shaking my roof 😆 🤣 😂 😹
Nunca se dijo quien suena mas duro si el powersof o el admark
Reggae music 🎵 love good Bass
🔊🔊🔊💥💥💥🙌
Did you know that the bottle testing for bass is a old school thing, and it is very accurate, if the bass is right, the bottle will stay there all night and day with out falling off, if it falls off the bass needs to be tuned correctly, just a pointer
Bass that's out of sync will need phase correction. Perfect bass will not only cause a bottle to fall but will cause humans to fall also. These amps have circuits built in that create the appearance of a warmer bass tone. Not puchy as the old 5000 crowns.
Awesome sounds
Woww.👍👍👍
ADMARK HAS A LOWER SUB FREQEUNCY POINT
hermoso sonido ❤
Hello Sir..I'm From INDIA..
Powersoft All Amplifier Is Manufactured By Which Country?
Please Let Me Know.!!
Italy
En conclusión quien suena más duro el ad42 o el k20 powersof
What’s them tops
what's the name of the song being played ?
Kemani Marley No cigarette smoking
All i can say is damn, AD-42 a shot jah kno
And the Bass boxes were facing the opposite direction
Are u saying the ad42 provided a better sound or more power??? I have been saving for a k20 but if the ad42 gets it done please tell me
@@jcruiz49 you can get 2 or 3 ad-42 for the price of the k-20
@@jcruiz49 He said in the video the AD 42 is not as strong but he prefers the tone.
@@jcruiz49 Now the K20 is better built and more reliable but the AD 42 definitely does a great job at a lesser price. Just make sure you test it as soon as you get it.
🤔👍🏾
Nothing nah go on fi the black unit sound system you know
Niice rack
Lastima no entender un locu
It sound okay 😂😂
My crew and i just burned a powersoft amp with a shitty generator this weekend 😭😭😭
Man that hurts sorry to hear that ...yes you got to be careful with the generators got to get a good one and you have to test it.
@@AcidSoundSystem haha learned the hard way, will haffi to send it to italy, wont make that mistake again
@@filip-kresimirsaric8975 Sounds good
@@AcidSoundSystem hey man, we found the problem, varistor burned out
@@filip-kresimirsaric8975 You got it fixed ?