Very useful video thank you. Both sub drums on a Knitmaster 328 I've recently been gifted were siezed almost solid. Getting them free was tough, but it's all done now and spinning freely on both sides. Such a helpful video. Many thanks Caz
Thanks for your informative video . My carriage on my singer 700 that I got on ebay was actually froze to the rail. I watched another video on carefully using a hair dryer to heat the carriage drum up enough to get it at least off the rail.Be careful as to much heat could melt the plastic gears. I got the pattern drums off cleaned and lubed the shafts and inside the rollers with your help and the rest back together.
Fantastic explanation 👍😊 I have a problem. My knitmaster machine does not want to knit from the B position from right to left (it only knits from C position) It knits perfectly from left to right Would you know what that could be I’m hoping it’s just a setting somewhere Can you advise 🙏🙏🙏
check the functions on the k carriage by going through them off the machine. watch the cams on the back of the carriage as you go through the functions, youll probably find one is jammed or not moving properly.
I’ve followed this tutorial and everything was perfect thank you! My only issue now is I can’t seem to get the tension dial back onto the carriage, it only spins to tension 3 then won’t move. I heard the click when putting back in place and the metal part moves fine…any advice? Thank you
Hi there's a central pin under the stitch dial, move that to the centre of the carriage, it slides, and then put the stitch dial in, you'll have a lot more luck that way. You can also text our business number on Facebook under Spartan kmp and someone will be able to help
yep, you can buy a screw remover, fits into a normal screwdriver pack. see this : www.saxtonblades.co.uk/impact-bits-other-accs/impact-bits-holders/damaged-screw-extractor-set?gclid=CjwKCAjwo4mIBhBsEiwAKgzXOGfrPgoVYgBg-_iiliOtbtKUlb8b7n9m4qpfqDx3YNP_zx-jN1uEQBoCXFsQAvD_BwE
Hi, I'm in Brazil. I really need to repair the lace carriage lc2. I don't know how to open it to repair it. Could you make a video teaching? Thank you. God bless you!
Excelente no pensé encontrar esto justo tengo ese problema muchas gracias por compartir solo ojalá fuera en castellano aunque se visualiza bien elvtrabajo
Hello, happy holidays! I am a begginer, and I have a new Sllver Reed SK-280. When J am knitting a big peace, and tension is right, seems everything goes smoothly...suddenly, my carriage is stock and I am loosing my stitches, the half of my work is cutting off... It happenes over and over. I do not know what to do..Thank you
Greetings from Mossel Bay South Africa. I was gifted a 360/260k. The LH drum is jammed and the RH one is very stiff. I have followed your video but can't get the sub drums off the shafts. Any advice?
You need a large flat bladed screwdriver, gently pry it underneath the drum, twisting the blade of the screwdriver up gently. It will slide off eventually I promise, just be careful, take it slow, and be gentle with the screwdriver
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Very useful video thank you. Both sub drums on a Knitmaster 328 I've recently been gifted were siezed almost solid. Getting them free was tough, but it's all done now and spinning freely on both sides. Such a helpful video. Many thanks Caz
Many thanks to you both for this excellent skill share 💯
Invaluable instructions, handy tips and great dialogue; very much appreciated 💯🖖🏼
Thanks for your informative video . My carriage on my singer 700 that I got on ebay was actually froze to the rail. I watched another video on carefully using a hair dryer to heat the carriage drum up enough to get it at least off the rail.Be careful as to much heat could melt the plastic gears. I got the pattern drums off cleaned and lubed the shafts and inside the rollers with your help and the rest back together.
Great help! Thank you
Thank you for a clear, easy to follow instructions. Kindest regards.
Thanks. I really enjoyed this video and the products in your store. Here’s hoping you make more videos.
Thank You for this video my Singer 700 has this exact problem, hopefully with your excellent instructions I will be able to fix it.
Thank you!❤
Extremely clear instructions. Thank you
Thank you, I wish you have someone in Southern California, Corona or Riverside to fix my Singer 360
MERCI BEAUCOUP DE FRANCE
Thank you so much for this video! Fixed the problem. 😊
Brilliant and INCREDIBLY helpful!
Спасибо огромное! Очень помогло ваше видео, прекрасная инструкция как ремонтировать
Fantastic explanation 👍😊
I have a problem. My knitmaster machine does not want to knit from the B position from right to left (it only knits from C position)
It knits perfectly from left to right
Would you know what that could be
I’m hoping it’s just a setting somewhere
Can you advise 🙏🙏🙏
check the functions on the k carriage by going through them off the machine. watch the cams on the back of the carriage as you go through the functions, youll probably find one is jammed or not moving properly.
I’ve followed this tutorial and everything was perfect thank you! My only issue now is I can’t seem to get the tension dial back onto the carriage, it only spins to tension 3 then won’t move. I heard the click when putting back in place and the metal part moves fine…any advice? Thank you
Hi there's a central pin under the stitch dial, move that to the centre of the carriage, it slides, and then put the stitch dial in, you'll have a lot more luck that way. You can also text our business number on Facebook under Spartan kmp and someone will be able to help
@@perth66 thank you! All fixed now and I can knit again 😊
Дякую!!!!!!!!!
Great tutorial, any ideas as to what you could do if the carriage handle screw head has been rounded off/chewed up) and unable to remove.
yep, you can buy a screw remover, fits into a normal screwdriver pack. see this :
www.saxtonblades.co.uk/impact-bits-other-accs/impact-bits-holders/damaged-screw-extractor-set?gclid=CjwKCAjwo4mIBhBsEiwAKgzXOGfrPgoVYgBg-_iiliOtbtKUlb8b7n9m4qpfqDx3YNP_zx-jN1uEQBoCXFsQAvD_BwE
Great detailed tutorial! Thank you!
Thank you so much! When the sub drum goes under the bracket are the pins supposed to be in? If theyre out they seem to jam for mt singer 360
You need to make sure the pins are under the main drum when reassembling
thank !!!
Thank you so much!
La perturbation du mouvement des lettres des boutons du chariot est une machine PASSAP.👍
Hi, I'm in Brazil. I really need to repair the lace carriage lc2. I don't know how to open it to repair it. Could you make a video teaching? Thank you. God bless you!
do you have vidio how to put colour changer back together please for sk280
Could you show how to repair a row counter for the sk 860 please?
very helpful!!! thank you!
Thank You
Excelente no pensé encontrar esto justo tengo ese problema muchas gracias por compartir solo ojalá fuera en castellano aunque se visualiza bien elvtrabajo
Gratidão por compartilhar me ajudou muito
Mi máquina es una singer 327 y quedé atascada en la cubierta es de dos piezas y no puedo sacarla
Hello, happy holidays! I am a begginer, and I have a new Sllver Reed SK-280. When J am knitting a big peace, and tension is right, seems everything goes smoothly...suddenly, my carriage is stock and I am loosing my stitches, the half of my work is cutting off... It happenes over and over. I do not know what to do..Thank you
Greetings from Mossel Bay South Africa.
I was gifted a 360/260k. The LH drum is jammed and the RH one is very stiff. I have followed your video but can't get the sub drums off the shafts. Any advice?
You need a large flat bladed screwdriver, gently pry it underneath the drum, twisting the blade of the screwdriver up gently. It will slide off eventually I promise, just be careful, take it slow, and be gentle with the screwdriver
Thank you
Thank you so much!