No way, I currently work for GnS on their shutdown crew, and have so for 2 years as a TA, wanted to get a boilermakers trade with them so I looked up some welding video and this was my first pick! Good to see what ill actually be doing if I choose to get the apprenticeship
Ibang klase ung heating nyu sir samin ceramin na yan na may isolation init nyan sa paa Ung ceramic n nakalapat sa bakal magadjust ka nlng s controler kung ilang init ang required
Di pa ako pwede bro. Student visa ako dito sa ngayon. Pinagpipilian ko ienroll ang either welding or auto sparky na course. Keen ako sa dalawa pero winiweigh ko pa ano mas bagay sakin. 21 ako sa ngayon. Ano advice mo bro? May number ka ba or social media na pwede kita ma pm.
Dear Pol Capio im a former Fcaw Welder at now close Hanjin shipyard located in the philippines, is thier a chance for me to be part of your company as a welder? i have tesda certifecate in fcaw gmaw and smaw.
@@imkashif98Do you still like in Pakistan cause most of these aren't built there so you're gonna first off get citizenship or green card for one of the countries fabricating these boilers plus it's not just simple welding you need licences degrees and shit ton of experience it's you can do it just really gotta be patient and motivated ass hell good luck and if you have other questions hit me back
As a boilermaker of 16 years , never earned less then $140,000 gross a year. I wouldn’t recommend this to any young Australian. The trade is dead …… become a mechanic
How strange, I did my apprenticeship as a welder back from 95-99, I’m usually on 160,000 plus. Currently I’m Karratha on 225k per year. And you say our trade is dead ?
Good evening my name is frank owusu from Ghana am welder I heva 15 years experience in job I need companies to apply for the working Visa sponsorship for me I need job to work pls help me am good welder
No way, I currently work for GnS on their shutdown crew, and have so for 2 years as a TA, wanted to get a boilermakers trade with them so I looked up some welding video and this was my first pick! Good to see what ill actually be doing if I choose to get the apprenticeship
sana one day makapunta rin jaan..gusto ko rin mka expirience mka hinang ng malalaking mining equipment gaya niyan.ganda.ingat kabayan
This is one of top job here in canada and high rate salary. Thanks for sharing and ingat po.
Talaga? Pano kaya mag apply jan welder po ako dati ng japan barko mitsubishi name ng company ko po paaply nman jan kabayan
Hello mam would you like to assest me more about it.
How can I apply in this company? I am from Pakistan. I can make all kinds of boilers. My experience is about 25 years. Please give me some help.
The old Lincoln "Innershield" has improved a lot in the last 50 or so years.
Thank You for sharing your work place keep safe kabayan Salamat sa pag antay
I like your program mate .
Good work 👍 I'm MIG welder 4 years experience I live in dubai
Hi 👋 TIG welder 25 years Texas
I'm just about to do my Cert 3 in engineering and heavy metal fabrication!
Very excited can't wait, awesome video mate keep up the good work🤙
Is it worth it
@@tarswrld9250 I'm a appentice boily and I fucking love it aye would recommend for anyone
@@thelegendofswae8032 thank you I’m curious cause I’m doing pre apprenticeship heavy fabrication
I know this mans back is absolutely killing him at the end of the day sitting like that welding ...
Just do heaps of corrective exercises, not much difference sitting on at a desk
@@ddw-ge1ss lol
Fascinating! Thanks for showing us.
Cool, 1.6 mm core!, am so use to 0.8mm solid wire, bit jealous.
Stay safe sir,, hope someday maka punta din aq Jan sa AU, fabricator din aq tig/smaw currently work as pipe fitter here in S. G
Team kaps po dito nko dumikita po,
Salamat s magandang vidoe mo po
ayos! nakafull safety gear, ang ganda ng helmet. hahaha. gusto ko ginagawa mo fafa pol and nakakainspire ka dahil hindi ito madali. ingat ka lagi.
Good job, how much is your salary?
Bro bucket loader ba yang product ninyo galing bro ah,
Ibang klase ung heating nyu sir samin ceramin na yan na may isolation init nyan sa paa
Ung ceramic n nakalapat sa bakal magadjust ka nlng s controler kung ilang init ang required
Hows your back coping ?
English is really good mate.
Paturo lods galing mo mag wel wel.
Congratulations sa premier! Yahoooooo!
sorry na late boss replay ko now
well done...thanks for posting , Paul from USA
nice kabakal
Kabayan kayu na din nagfifit nyang hinihinang nyo? Salamat
Nice one sir 👍
nice very informative! new subscriber here! dahil sa ducati 821 mo awesome bike sir!
How can I apply in this company? I am from Pakistan. I can make all kinds of boilers. My experience is about 25 years. Please give me some help.
Anong welding process po madalas ginagamit dyan sa Australia sir, or sa workshop nyo po.. mig or fcaw
May nag xx-ray ba dyan ng hinang sir?
Schlam ba yang company nyo boss sa WA Perth?
lods paano makapunta ng australia at makapag work bilang welde fabricator currently here in japan
Nice job..am also a fabrics welder just looking for an opportunity to work with your company..
Sir ano po agency niyo? Salamat
Hi sir MD Hossain im sir PiPEFITTER
Sir question lng po. What if malabo ung mata o may gamit na eyeglasses pwede rin po ba maging welder or mababawasan ung chance?
Good day po. San ka po dito sa Australia?
Marvin Barcenas qld bro.
Nasa Brissy ako bro. San ka banda?
Biloela bro. 1hr away from gladstone.. hiring kmi baka interested ka... boiley/welder pero hanap nila PR na...
Di pa ako pwede bro. Student visa ako dito sa ngayon. Pinagpipilian ko ienroll ang either welding or auto sparky na course. Keen ako sa dalawa pero winiweigh ko pa ano mas bagay sakin. 21 ako sa ngayon. Ano advice mo bro? May number ka ba or social media na pwede kita ma pm.
my agency kayu sa pinas?
Is that a mig wire why don’t you use iner shield wire with gas
You are macking excavator bucket. am I right
Brother I work in dubai know Lakti valley gas building gas cutting work I have eight years experience in Dubai which I can get
Hi sir ano po qualification pag nag apply jan Australia sir. Ok lang po ba Smawer? 5yrs plus landbased local experience
Dear Pol Capio im a former Fcaw Welder at now close Hanjin shipyard located in the philippines, is thier a chance for me to be part of your company as a welder? i have tesda certifecate in fcaw gmaw and smaw.
would you recommend studying welding?
It is exactly the same of my projects in japan
How can I apply in this company? I am from Pakistan. I can make all kinds of boilers. My experience is about 25 years. Please give me some help.
@@imkashif98Do you still like in Pakistan cause most of these aren't built there so you're gonna first off get citizenship or green card for one of the countries fabricating these boilers plus it's not just simple welding you need licences degrees and shit ton of experience it's you can do it just really gotta be patient and motivated ass hell good luck and if you have other questions hit me back
@@morganweller1491 can you give me your contact number
Thank u sir for replay
sir anong agency mo sa pilipinas
hi, buddy alam mo ba paano kumuha ng welding cerifacation dito sa australia. salamat
Punta ka sa tafe. O kaya pa assess ka.
Tol H.E equipment welder ka pla jan,same tau Dito me saudi paanu makapunta jan pre maraming slmat...
boss gaano po kalaki ang welding wire na gamit mo?
Hello sir I have welding experience 15 eyar I am from nepal new work in saudi arabia I need to go Australia so haw to contact you
I'm a Rigger, but i've been offered an apprenticeship as either a Boilermaker or a Fitter, I don't know what to choose.
Tell me what you chose im going to do a diseal mechanics apprenticeship but I'm learning to weld what did you go with
There’s plenty of work for a fitter I was a boily with machine exp and never ran out of work
Hi I'm from south africa I have boikermaker N3 but no apprenticeship as yet plz help
sir how to geg welder job
Am a welder in kenya.
3xp? On alloy steel casting?? Wow 81 Ni h4 is the better formula for t and q CRF
Hi sir paano mag apply papunta jan dto ako sa brunei ngaun smaw fkaw welder 15 years experience
15 years in brunei
7:03 let's rock n roll👍
Bro, do you need ASME 9 certificate/ticket for that?
Im welder fcaw gtaw smaw from Tunisia expérience 3 years i need job
How to apply sir? I want to work there
sir gaano kana katagal nagwowork dyan sa australia as a welder.?
anu pong visa inapply nyu.?
Tanong lang po sir. Sa pagkatanda mo po ilan buwan po lumabas visa nyo after vetassess? Thank u
Good luck. Di ko matandaan yung sa akin..
lip cast bucket???
I am indian i come to Australia🇦🇺 student i experience welder
Sir my hiring pa po b jan welder?
As a boilermaker of 16 years , never earned less then $140,000 gross a year.
I wouldn’t recommend this to any young Australian.
The trade is dead …… become a mechanic
What do ya trade papers say heavy welder or heavy fabrication
I am doing a apperentship and torn which one to do at Tafe aye
@@thelegendofswae8032 engineering - fabrication trade
Boilermaker (Australia)
@@properaussie331 cheers boss
How strange, I did my apprenticeship as a welder back from 95-99, I’m usually on 160,000 plus. Currently I’m Karratha on 225k per year.
And you say our trade is dead ?
Can you help me work in your country?
I might join ur company in 2025 😐
Please help me sir i want to work there
Even at $63.50c an hour permanent in Australia. It’s not worth it. Don’t become a boilermaker.
A welder might get $50 but that’s also garbage money
Hi, I am a welder. I am looking for a job with a degree in welding and 8 years of experience who can help me 😔
Hi
Pa apply ng company mo kabayan isa po akong welder din dati sa japan welder ng isang barko cruise ship po sanay matulongan nyo po kami
Good evening my name is frank owusu from Ghana am welder I heva 15 years experience in job I need companies to apply for the working Visa sponsorship for me I need job to work pls help me am good welder
Welding name CO2 👍
Its MIG wire
#TD
How can I apply in this company? I am from Pakistan. I can make all kinds of boilers. My experience is about 25 years. Please give me some help.
#TD
#TD