HOW TO MAKE BIKE SEQUENTIAL LED INDICATOR
HTML-код
- Опубликовано: 13 май 2018
- HOW TO MAKE SEQUENTIAL LED INDICATOR
In this video I have made a sequential led indicator which can be used as bike indicator. I have tried to make this video as easy as it could be and used common components. I Hope it would be helpful
COMPONENTS:
1- 1X 555 timer IC
2- 5X C945 transistors
3- 2X 1N4007 diodes
4- 3X 100uf 50V capacitors (electrolytic)
5- 6X 10K resistors (1/4 watt)
6- 5X 1K resistors (1/4 watt)
7- 3X 4.7K resistors (1/4 watt)
8- 5X leds
9- vero board
10- jumper wires
Circuit diagram:
drive.google.com/open?id=1icJ...
drive.google.com/open?id=1DCD...
Hola kikani. Me funcionó perfecto este proyecto. Gracias por subir el circuito. Saludos desde Argentina
"Thank You", thank you very much 😎
Sir, at 00:00, a legend is born. I was looking for an informative video like yours for a whole day! Now I am at peace and can make this circuit. Seriously man, you're a legend!
BTW whats the song in the vid???? It's pretty neat :D
@@KiyanisLab thank you :D. Keep up the good work!
I didnt understand what you said.. but your video is on point👌 very well explained ..bravo👌
Is there a way to fade each LED on just like you have once power is received, but they all stay on instead of starting over?
Bro i made sequential led circuit board using bc547 transistor after see your video on RUclips i wanna use 3 watt yellow led (2.2v 700ma )please will you tell me which resistance may i used for parrelal connection.i see on led resistor converter there’s showing 15ohams 21 watt.If you use that led which resistor you will use?
sir how could i control the speed of leds
for eg i want to make it fast but it is a little slow moving
nice video!...well half of my answers were already answered in the comments...but still - how do i connect a 6v or 12v relay in place of the led's...i want to control larger lights?
Sir app ne meri tmna jaldi puri kr di thanks
ihave prepaired this circuit , and connected 7 led insted of 5 leds, and worked nicely. but whithin 5 minuts the 12v power supply board gets extremely heat and finally damaged. why? pl comment.
Great project 👍 can you tell me if I can apply this method to make turn signal for my car please let me know.
I like your channel for true project
Hi! Beautiful project!
I need to create the same project but with 20/25 leds. Can you help me with the correct diagram that I need? Very thanks
Very good. I did it and it's great .it works very well
hi, I kindly wanted to ask for your help for a change to this project of yours, that is, I would like to make the ignition time between the first led and the last led last at least 10 seconds and add a beeper at the end of each sequence cycle.
how can I do....?
thanks for the help you want to give me and congratulations on the channel.
roger
Dude Thnx for sharing the knowledge., It works, but I have a problem.. My motorcycle is converted to full wave charging system.The voltage input varies from 13 volts to 15 volts..What should I do to prevent the overvaltage?
I like this video.can i ask sir?can i use BC547 for transistor?and all the resiators is same for this project?
मेरा नाम दिलीप मोरे है मैने आपका विडीओ देखा बहुत बहुत अछा लगा आप कहेते हो कमेंट करो मै जवाब जरूर दुगां मैने एक आठ ८ फंग्सन वाली सरकीट के बरेमे आपको बोलाथा आपने बोलीथा मै जरूर बनाके दिखाऊगां लेकीन आपने दिखाया नही और हा आपने एक १६ एल ई डी वाली ऍसी ही एक सरकीट बनाई थी साईड सीग्नल के लीये ऊसकी विडीओ मुझे अभी आप भेज दिजीये मुझे ओ सरकीट बनानी है
धन्यवाद
जय .... शंकर
Sir, how do you connect it to your bike, do you connect it direct to the bike's 12v battery? if so, then how do you control the signal, indication?
hi, if you want to place led strips and not led diodes?
Hello
Kiyani's Lab
, I am a big fan of your YT channel and your beautiful work, bravo, it is with great pleasure that I realized a lot of circuit that you made, thank you
I have a question, please can I add a dozen led in this same circuit, I want to add 15 led + 15 C945 + 15 res 10K +15 resi 1K, is the 555 can support 20 led in a editing the same? otherwise how should I get it done?
thank you so much
thank you so much
Good idea. ...
me ohi vero board me 5 led poriborte 30 led lagana chatahu to hoga?
Can I use a 12v 1 watt led’s in this circuit?
Thank you, I am making this into a PCB for my car
@@KiyanisLab Will do, you missed a 100uf Cap on your Schematic, there are only 2 and 3 on the diagram and in your video, I need to get a new board made.
Good explanation
Hi Sir I try to do your tutorial but its not woking I double check all may circuit connection all are correct can you help me to sove this. Thank you?
wow impresionante me gusta tu video sigue con essos videos muy buenoY
thank you sir... verry verry like you full... tutorial👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
i'm from Indonesia...
Really good sir
Hello sir
Can I use 5mm transperent colour or white led instead of yellow/ orange colour.
Secondly can I use Bc547 transistor instead of c945.
If so what is the resister ohms should I use
Thank you.
Can we use 15 leds - 3 leds in one column 5x3 leds in parallel= 15 leds in this same circuit with same resistors etc.
Sir can I apply other colour of LEDs on this circuit
how about 24v LED light can it run like that?
Is there a way to make the 5th light be brighter? I was having trouble getting the circuit to work right but got it figured out. I noticed the 5th light in yours is also dimmer than the other 4
Matthew Hall same problem here
Kiyani's Lab Sir please try to understand the leds which you are using for turn signal in this projects will not be visible during daytime causing accidents,so if we are using lil bit high lvl led what led specs it should be & what value capacitors to use..I hope you understand what I am asking for....pls help many thanks
Keep it up!!
Is this socket right for the 12V bulb?
Great Project Klyani, I've built it and it works a treat - I'd like to know if it's possible to add more led's, for example 10 or 12 led and if so what is needed to achieve this also ?
@@KiyanisLab I've added up to 10 leds but to get more than 5 leds to work I've had to increase the supply voltage.
I increased the voltage to 14v and managed to get 7 leds to light up, I guess the supply voltage is based on the number of leds, i.e. 5 leds @ 2.4v = 12v
Is that how the supply is determined? what is the max voltage the 555 timer chip can handle
bhaie main nai 1.5 volt ki mini moters ko blink kerna hai .. 2 sconds main 3 mini motors ko blink kerna crant ka jatka daina hai .. hai... kya ap meri madad kersktay hain..
can i replace 4.7k with 3.2k and c945 replace with bc547
Can this be done with 7 leds and can it be slowed down?
Nice video bro .
Can we use 5.1k ohm instead of 4.7k ?
Hi... IC is getting heated and only once it will run, not in a loop.. Help
Great
is me kia hum BC 547 transistor use kr skte hain.??
Is that circuit work with 12volt leds.
what if I need to use more than 6 SMDs?
Thank you very much sir , app video bahut achhi bnate ho asani se samjh a jata hai sabh kuchh, ek sval hai sir led ki matra kese barhe?
Thank you
Mantul broo
very interesting
Nice ! Can you please post video for how to create Differential thermal controller used for Solar Water heater?
very nice ser
can it run on 9 volt battery instead of 12 volt
Nice one. Can u show a circuit which can be used to control led strips with the same function
Sar kya Ham ismein 5 se bhi jyada LED istemal kar sakte hain ISI circuit mein
how many millimeters are these leds?
i need to add more leds. 5 leds ki 3 lines should i make three such circuits or can u guide me to do some thing else
@@KiyanisLab yes i mean i wanna light 3 leds at the same time. What will be removed. 10k resistor or 1k? And it should be replaced with what ohm reisistor
Very nice bhai
Use 100k potential meter instead of 4.7k resistor so then you can adjust the speed of chaser slow and fast
There are 3 4.7k resistors. So where to put the variable resistor?
Ic ka no.pta h bhai
@@amarjeetsharma74 NE555
good video could you do one but with a voltage of 60v?
How can I can contact you in-person. There us something which I would like to under stand from
Maximum kitna led connect kar payenge ??
Can I add this on 12 volt car batteries. Kindly reply. .thanks....and thanks for this beautiful video
Kiyani's Lab , can it just tap the car signal DC 12v wire direct to this board? Thanks.
Hello my friend, I did this with 15 LEDs. Only some light up and it is voltage dependent. I think that if I put 35v for them to light all up, I will be frying something. Can you help? I can send you video.
@@KiyanisLab Bro, thank you for your reply. Can you please tell me how can I make this for 15 LEDs? I'm making dynamic turn signals.
1w led use kar ne ke liye kya changes karna padega
Please information on this LED sign board
Sir plz tell me how to select the value of transistor and capacitor and resistance
Ashutosh Bari looks like you did not watch the video, everything is explained
Assalamoalykom kiya led ko increase kar sakty hain 7
Thanks sir plz 4 Indicaters blinks at a time circuits video.
Your Video Nice ❤❤❤
Very good vdo sir and circuit digram png wala jo diya us se hm log bohot aasani se es circuit ko bana payenge, sir isme potasomiter laga sakte hai kya konsa aur kaha connection dena padaga
Nice sir
I want to add more LED about 20 LED , Circuit maybe change or unchange?
@@KiyanisLab can you suggest me please help me
@@KiyanisLab please send me *circuit diagram* for 20 LED more
@@KiyanisLab plzz sir make circuit for 20leds.
Dear @Kiyani's Lab Please share make a video for 10led strip 12v operated. thanks
Can we make this in one single module. Ek design mein left to right aur right to left dono bna skte hein kya Car trunk light jaisa?
@@KiyanisLab great. Aap ki help chahiye.
Osammmmmmmmm
Hello dear.. this is awesome simple circuit. I add up 10 leds but it works only for 5 leds rest of leds are not working. Please make the same circuit video for 10 or more leds.. waiting for your reply as earlier
In this circuit using 5 LED, suppose i want to make with 7 or 10 LED is it possible?
yes
Agar leds badhani h to capacitor kon sa use hoga
hello friend, does this work with 1W leds? (300-350mA each led)
it can handle 100mA for 1W use bd139
Nice bro. Ye cercuit car or bike me use kar sakte h? Or jaldi kharab hoga ya nahi? Pls reply dedho bro love you
555 ic toh flasher k liye use kiya hai ?
Completed circuit @ 10:20
How many led can it power
Jyada led use kar sakte he
Can I use 7 LED?
Sir please give circuit in which 2 column of LEDs bright sequentially
Means 2 LEDs at one time and they also have large brightness
Sir can you give me circuit image?
But,sir how l increase brightness of leds?
Can we add 10 leds
Super bhai
Can u make automatic signal s for bike
Kitni led chala sakty hn plz bto
Bro led flasher banane ka videos banaiyena separately 555 ic use karke motorcycle k liye
Nice work bro... I have a doubt. Can this circuit supports high power leds?
Value & description of transistors pls Tks
We can use 8 led for this board
What is the current input range?
Thanks for your early reply! Is the current supply variable? How much current and voltage will each led get? I will be using 500 mA supply.
Hi, great Job. Could you add full diagram ?, in video is incomplete :(
And where do you put power 12v + and - ? Thanks
Respected sir 20 leds ke liye...is circuit Ko banayiye..plzz
2 pin relay led ke liye splender bike k liye bro plzzzz
Nice made, but where and how to build this in ?