All aspects of your videos are very professional, but what is truly exceptional in yours is the pacing. You include just enough of the various operations to clearly show what you are doing, without letting it get boring. You and Tony stand out in this respect. Most others let the operations go on much, much too long. Thank you!
Stefan, Years ago when I was a young apprentice my training instructor taught me to use a piece of notebook paper for touching off. A piece half again as wide as the keyway underneath the cutter and very gently bring the cutter down until it is marking evenly. Very accurate, and fast. It works for any machine tool.
Very professional looking part, Stefan. If someone sees that part, would definitely think it was made in a professional manufacturing machine shop. I'm always enjoying watching your videos. Keep them coming.
More super Stefan work -- that keyway tool centering is without doubt the most logical method. I've said before - oh boy do I miss my big old shaper! You keep your shop and machines so clean! Nice job.
by far my favorite hobby machinist. your perfection is very nice to watch. you're philosophy about life makes me feel better too. " just have to do it. "
Nice piece of job! 17:19 - before pressing START machining -ALWAYS have one thought behind your head: if the machined groove doesn't have to be positioned with the keyway groove inside the center hole. To be honest, once I've fu...ked up the similar to your's sprocket - the first tooth had to be rotated for 4degrees relative to the keyway. Of corse the sprocket is non symetrical then, so it is also important to notice if your sprocket is correctly placed inside the dividing tool. If there's no drawing for the toothed wheel, always ask the client for where and what it's used.
A complete part from start to finish shown in just one segment. As others pointed out, with just enough detail to make it instructional without being boring. I have broaches for keyways but using the shaper provides superb control. The matte surface would help it retain some lubricant in other applications. Thanks for making such professional videos.
It is always enjoyable watching you work. You do have a good grasp of the small details which is pleasure to watch and learn from. Thank you for taking the time to show all of your work and I must say the camera work in this video is superb, love looking down the hole as the shaper was cutting the key way.
Love all your videos despite not having machine shop tools myself. (I've always worked in wood). I've stopped watching cable TV since channels like yours are much more enjoyable and educational. Keep them coming.
Great video. Setting the height of the slit saw is a great example of why many gauge block sets have wear blocks - a size that the manufacturer makes a large batch of. You use the wear block on the end of your stack so that it takes any abuse instead of the other blocks that you keep pristine. Replacing one 0.100" block is much cheaper than replacing several odd sizes in a set.
Stefan, Thank you very much for these wonderful and informative videos, thanks for the information of the files, I have seen two videos of you and I was impressed with the quality of your works. Grüße aus Chile
I have a G&E shaper, it has a broken elevating gear for the table, it is a bevel gear that has an extended side which is threaded with #6 acme threads so it looks like a mushroom. When the drive gear turns this gear is moves on the acme thread and raising the table. The acme thread is mounted in the base of the machine and it does not turn. I have not been able to find and good videos about making bevel gears as of yet. Have you ever had the occasion to make any bevel gears before?
Nice finish on that part... looks very professional. So after his shaper completely rusts away after the next great war and some aliens excavate the remains 5000 years from now, the only thing left will be your ratchet gear in perfect, spotless condition. They will wonder who was able to make such quality parts in what they will refer to as our dark ages. ;) Very nice camera angles btw. especially your famous shaper right in the eye shots... glorious and very educational. Thank you for sharing another adventure and take care!
Love the grim opening music. When I have a hard interrupted cut I relieve the leading edge of (in this case) the key way, a lot easier on the tool edge. Love your videos
Always fun to watch your videos, Stefan. Not only are you a fine machinist, but you are a "not too shabby" video producer, too. ;-) We know if your name is on it, it is going to be quality.
As usual Stefan, top job. Could you please tell me to get the 1.70mm width of cut between teeth did you have to move the 1.60mm cutting saw 0.05mm up and down off centre and repeat the 30 divisions? Thanks Max
Another fine video Stephane, what size tip did you use in your blast gun for the aluminum oxide and that was 50 grit you used @ 90 psi? How many CFM is your compressor? I am just about to start using my new blast cabinet using a 18 CFM compressor with 90 grit AO @ 90 PSI but can't find any data on tip sizes. I also have 50lbs of glass beads which I understand you shd shoot @ 30-40 PSI or you will destroy the beads but I don't know what size tip to use, I just have ceramic tips for now but am interested in Boron Carbide in the future. Thanks, Doug
I agree; there's something remarkably attractive about that part. Probably the combination of the bead blasted exterior, contrasted with the finish of the bore after hard turning. I've had a 14" G&E shaper since 2010; picked up a Rockford 24" HD hydraulic shaper a month ago that needs wired up. It doesn't have the ratchet feed wheel. Excellent shots of centering the keyway in the bore; I've watched your previous video on the subject multiple times. Do you ever use any other method besides "the even scratch"? Thanks again for the great video!
Thanks, this is again a great video. Even if thee is no black magic, I like what you show and learn a lot every time again. I thought I had gone through your whole collection by now, but this is is still new to me 😁
Stefan, in the shaper setup, as can be seen at 5:50, you seem to have used both copper and brass shims. What is the reason? In general, which do you find more useful around the shop?
Flycutters may be annoying, but with multi-toothed cutters, there's often the problem that they only really cut on a single tooth, and you have a hard time fining the cause. How do you control that effect, also with shell mills etc?
Hey Stefan. Did you know that you can use the reduction ratio of the rotary table divided by the number of divisions without needing to work out angles. i.e. 90 (rotations per rev)/30 (divisions) = 3 (hand wheel rotations). this also works for fractions. so if you want 100 divisions you get 9/10 turns (18 holes on a 20 hole dividing plate etc)
the final boring after hardening had golden chips, you said that this was not overheating with this colour. What colour does indicate that you are overheating?
2/100th of a mm Run out?! Toss the part and start over! Shotty work Stefan...Shotty work. ;) Always look forward to your videos. My only complaint is that you don't make enough of them. Looking forward to the next one.
Thoroughly enjoyed that Stefan, was hoping that you would cut the teeth on the shaper but I guess I cant have everything. Thanks for the indexing explanation. I am always inspired by your workmanship and approach. Thanks for the time and effort making & editing & uploading these videos. All the best Mat (Sadly no feature of your sandels this time...)
Didn't the ratchet's teeth move a bit out of "alignment" with the radius of the part, if you perfectly centered the cutter on the first cut and just did one more (instead of two) for the 0,1mm extra width? Awesome vid and work as always, nevertheless!
I had expected another run with an offset of the dividing head. It's hard to imagine any significant alignment implications for the operation of the ratchet either way.
Stefan Great job very well explained Now a idea for a video. I have in the past made. Parallel tooth bevel gears on the mill/rt setup. But I have got consfused ,the correct way according to mr Law ,s book is you do three rotations with a plus ,normal,negative offset with a corresponding hight offset Now looking at the web all show a two stage operation If you could spare the time to explain the Stefan way including the calculation for the gear cutter selection I am sure it would help others and me The ones I have made have worked for the govener drive for a model steam engine last set was a 1 to 2 ratio so the blank angles were not 45 deg. In anticipation Stuart
Stefan im looking for goggles for magnifying fine work. Ive bought eye pieces and they are ok and i bought jewelers glasses but the focus on them is too close. Id like something that i wear leaving my hands free, giving good magnification errr x10 maybe but focused at desk distance when seated. Have you used something thats good for this ? Great work by the way. Nicely done.
Cutting key ways with a file is a pain. last time I did one, I made a jig using a windshield wiper motor with a small crank arm and a file on the end of a long connecting rod. Turned it on and let it do its thing while I worked on something else. I've seen shaper attachments for bridgeports but I just don't do enough key ways to justify the price.
Very nice. I imagine the part was more accurate and finished better than the original. No one ever fubars the indexing. :) "so I don't fubar that, not that I ever did that". I enjoy your injections of humor.
You mentioned that when cutting the keyway on the shaper the clapper box was locked down so the "clapper didn't clap". I have had little practical experience using a shaper and hope you would explain why and when a clapper needs to clap and conversely, when it does not. Thank you.
The "clapping" allows the tool to swing away on the backstroke, not to rub over the work. When workign in a bore, that can cause a nice crash - so you lock down the clapper box and feed the tool down only when it is not in contact with the work
Wacken, hope you seen a few great shows there, could think of a few heavy shows i would love to see there... cool, love all of your videos, extremely entertaining, loved you the characters from This Old Tony... from Louisiana, USA
Very good! Did you recreate the trapezoidal tooth profile, or was squaire sufficanet? My thinking was to lower the cutter and retard the part a few deg. Then raise the cutter and advance the part a few deg.
another quality piece, on a couple of levels. quick question, what is your opinion of dividing plates on a rotary table vs an indexing head, useability and what not?
Brilliantly done and we'll explained as usual ,as usual say, if you think things through its possible to make some complicated items thanks for another good vid
The little oven you are using, what are your views on it? I have been looking on Ebay for one, and they are not very expensive. Would you buy one again if you needed one, or a different model?
Nice work as usual. You probably thought about how widening the teeth cuts by changing the cutter height produces a different geometry than widening by slightly changing the angle. How did you decide which method to use?
Stefan, I was very interested in the video series where you reworked your rotary table. But, I don't remember seeing the dividing wheel hardware. Did you make these parts, or did they come with the dividing wheel? If you made them, it seems like something you would have done during your series of videos where you were improving the rotary table. I'm just a little bemused. Thanks
My Wife was on the computer when the notification appeared in the bottom corner. Had me pacing up and down the room trying not to look interested until she had gone. Inspiring work again Stefan well done. Use of the word 'Fubar' made me spit out my coffee !
Stefan Gotteswinter Some strangeness with frame rate and rotation I guess. Looking at the tool it still looks like climb milling. Looking at the arbor and spindle it certainly does not. Thanks for clarifying!
Good vid Stefan. You take pride in your work in every video. Now, brass tax: Why does your TEFC lathe motor have the centrifugal fan cover exposed to coolant and swarf in the back ( lower chip guard). Is that an after thought guard? It should have protection...no? Please keep making vids, learned a lot from you.
All aspects of your videos are very professional, but what is truly exceptional in yours is the pacing. You include just enough of the various operations to clearly show what you are doing, without letting it get boring. You and Tony stand out in this respect. Most others let the operations go on much, much too long. Thank you!
Gotta agree 100&1%. Although I've gotten into the habit of just skipping over huge sections of those boring parts.
I agree, but every time I cut an operation short, someone wants to bitch about that as well.
I Was thinking the same...
Stefan,
Years ago when I was a young apprentice my training instructor taught me to use a piece of notebook paper for touching off. A piece half again as wide as the keyway underneath the cutter and very gently bring the cutter down until it is marking evenly. Very accurate, and fast. It works for any machine tool.
love your videos. thanks for all of your knowledge!
Looks very nice - the blasting medium really makes it look very professional. Thanks for making all your videos.
Very inspiring. Very clear camera work too. Thank you Stefan!
Very professional looking part, Stefan.
If someone sees that part, would definitely think it was made in a professional manufacturing machine shop.
I'm always enjoying watching your videos. Keep them coming.
More super Stefan work -- that keyway tool centering is without doubt the most logical method.
I've said before - oh boy do I miss my big old shaper!
You keep your shop and machines so clean!
Nice job.
by far my favorite hobby machinist. your perfection is very nice to watch. you're philosophy about life makes me feel better too. " just have to do it. "
Great step by step instruction with a final "you can do it at home" address, to get interested hobbyists and makers into activity mode. Thanks Stefan!
Nice piece of job!
17:19 - before pressing START machining -ALWAYS have one thought behind your head: if the machined groove doesn't have to be positioned with the keyway groove inside the center hole. To be honest, once I've fu...ked up the similar to your's sprocket - the first tooth had to be rotated for 4degrees relative to the keyway. Of corse the sprocket is non symetrical then, so it is also important to notice if your sprocket is correctly placed inside the dividing tool. If there's no drawing for the toothed wheel, always ask the client for where and what it's used.
None of your work is ever shabby mate. Your accuracy is an inspiration to metal bashers like myself.
A complete part from start to finish shown in just one segment. As others pointed out, with just enough detail to make it instructional without being boring. I have broaches for keyways but using the shaper provides superb control. The matte surface would help it retain some lubricant in other applications. Thanks for making such professional videos.
It is always enjoyable watching you work. You do have a good grasp of the small details which is pleasure to watch and learn from. Thank you for taking the time to show all of your work and I must say the camera work in this video is superb, love looking down the hole as the shaper was cutting the key way.
Beautiful part. Enjoyed watching. Appreciate your attention to precision.
Thank you!
Superb attention to detail as usual. I wish I could get hold of small pieces of tool steel here in Australia.
Love all your videos despite not having machine shop tools myself. (I've always worked in wood). I've stopped watching cable TV since channels like yours are much more enjoyable and educational. Keep them coming.
I haven't seen a shaper at work in decades. Nice job on the Ratchet wheel.
Steve
Great video. Setting the height of the slit saw is a great example of why many gauge block sets have wear blocks - a size that the manufacturer makes a large batch of. You use the wear block on the end of your stack so that it takes any abuse instead of the other blocks that you keep pristine. Replacing one 0.100" block is much cheaper than replacing several odd sizes in a set.
I learn something every video you put out plus get a good chuckle or two to boot, Thanks again.
I was impressed with your commitment to excellence. Of course that is always your way of machining.Thanks for sharing your talents.
YOU, can make anything, some of us make a mess! I find your videos very inspiring, thanks for the time you put into them.
Cliff
I need a video that's nothing but like an hour of shaper cutting.... Very relaxing
Stefan, Thank you very much for these wonderful and informative videos, thanks for the information of the files, I have seen two videos of you and I was impressed with the quality of your works.
Grüße aus Chile
Thank you for watching and commenting!
You must be a metal fan in more ways than one... excellent!
Another great job!... The hard turning leaves a very nice finish!
I have a G&E shaper, it has a broken elevating gear for the table, it is a bevel gear that has an extended side which is threaded with #6 acme threads so it looks like a mushroom. When the drive gear turns this gear is moves on the acme thread and raising the table. The acme thread is mounted in the base of the machine and it does not turn. I have not been able to find and good videos about making bevel gears as of yet. Have you ever had the occasion to make any bevel gears before?
Nice finish on that part... looks very professional. So after his shaper completely rusts away after the next great war and some aliens excavate the remains 5000 years from now, the only thing left will be your ratchet gear in perfect, spotless condition. They will wonder who was able to make such quality parts in what they will refer to as our dark ages. ;)
Very nice camera angles btw. especially your famous shaper right in the eye shots... glorious and very educational.
Thank you for sharing another adventure and take care!
Love the grim opening music. When I have a hard interrupted cut I relieve the leading edge of (in this case) the key way, a lot easier on the tool edge. Love your videos
Very nice job. After the initial machining could yo have press fit a small shaft in the hole to prevent or decrease the warping ?
Looks very professional Stefan. Well done.
Great job Stefan. Thanks for sharing. regards from the UK
Stefan, you are inspirational. Thank you for your videos. Mike
You make it look too easy!
Beautiful work.
Always fun to watch your videos, Stefan. Not only are you a fine machinist, but you are a "not too shabby" video producer, too. ;-) We know if your name is on it, it is going to be quality.
Very interested in your little oven. Nice work.
Its a small Efco110 oven for burning enamel - I just added the EuroTherm controller.
Always enjoyable. Always informative. I appreciate your craftsmanship! Thanks for posting Stefan!
favorite youtuber! Had to stop watching a video to watch this haha.
Thank you!
Poor other youtuber you where watching ;)
Me too!
Ditto :)
another piece of first class work. would the shaper have been an alternative method to cut the rachet teeth?
This view of the shaper tool cutting the keyway is awesome. Great job. I wish I had a shaper, I think it's an underrated machine...
I agree with you, Stefan- all limitations live only in your head. You can do all- just step by step follow your dream!
As usual Stefan, top job. Could you please tell me to get the 1.70mm width of cut between teeth did you have to move the 1.60mm cutting saw 0.05mm up and down off centre and repeat the 30 divisions? Thanks Max
Another fine video Stephane, what size tip did you use in your blast gun for the aluminum oxide and that was 50 grit you used @ 90 psi? How many CFM is your compressor? I am just about to start using my new blast cabinet using a 18 CFM compressor with 90 grit AO @ 90 PSI but can't find any data on tip sizes. I also have 50lbs of glass beads which I understand you shd shoot @ 30-40 PSI or you will destroy the beads but I don't know what size tip to use, I just have ceramic tips for now but am interested in Boron Carbide in the future. Thanks, Doug
I agree; there's something remarkably attractive about that part. Probably the combination of the bead blasted exterior, contrasted with the finish of the bore after hard turning.
I've had a 14" G&E shaper since 2010; picked up a Rockford 24" HD hydraulic shaper a month ago that needs wired up. It doesn't have the ratchet feed wheel.
Excellent shots of centering the keyway in the bore; I've watched your previous video on the subject multiple times. Do you ever use any other method besides "the even scratch"?
Thanks again for the great video!
Beautiful work Stefan.
Thanks, this is again a great video. Even if thee is no black magic, I like what you show and learn a lot every time again.
I thought I had gone through your whole collection by now, but this is is still new to me 😁
Stefan, in the shaper setup, as can be seen at 5:50, you seem to have used both copper and brass shims. What is the reason? In general, which do you find more useful around the shop?
wow Stefan you are the man. I look at your videos like classroom instruction.
Nice job.
I feel that the pawl that did all the cycle could have been made afresh again.
Kudos...
Flycutters may be annoying, but with multi-toothed cutters, there's often the problem that they only really cut on a single tooth, and you have a hard time fining the cause. How do you control that effect, also with shell mills etc?
Nice project. Not too complex but still with a few interesting operations in it. Thanks for sharing.
Hey Stefan. Did you know that you can use the reduction ratio of the rotary table divided by the number of divisions without needing to work out angles. i.e. 90 (rotations per rev)/30 (divisions) = 3 (hand wheel rotations). this also works for fractions. so if you want 100 divisions you get 9/10 turns (18 holes on a 20 hole dividing plate etc)
Nicely done, excellent video, always a pleasure to watch you work.
Nice work Stefan. Great way to cut a keyway.
the final boring after hardening had golden chips, you said that this was not overheating with this colour. What colour does indicate that you are overheating?
Love that deburring with the rotary grinder! Very efficient :-)
2/100th of a mm Run out?! Toss the part and start over! Shotty work Stefan...Shotty work. ;)
Always look forward to your videos. My only complaint is that you don't make enough of them.
Looking forward to the next one.
Very nice work. I like your step by step explanation.
Great video. The wheel turned out great.
Thoroughly enjoyed that Stefan, was hoping that you would cut the teeth on the shaper but I guess I cant have everything. Thanks for the indexing explanation. I am always inspired by your workmanship and approach. Thanks for the time and effort making & editing & uploading these videos. All the best Mat (Sadly no feature of your sandels this time...)
As designed, there is not much cross sectional meat between the keyway and the teeth. Did the original crack through that area?
Professional all the way! Thanks from Lincoln, NE, USA
Didn't the ratchet's teeth move a bit out of "alignment" with the radius of the part, if you perfectly centered the cutter on the first cut and just did one more (instead of two) for the 0,1mm extra width? Awesome vid and work as always, nevertheless!
I had expected another run with an offset of the dividing head. It's hard to imagine any significant alignment implications for the operation of the ratchet either way.
I am impressed with your talent
Very nice looking final product. I picked up some good tips.
Stefan
Great job very well explained
Now a idea for a video. I have in the past made. Parallel tooth bevel gears on the mill/rt setup. But I have got consfused ,the correct way according to mr Law ,s book is you do three rotations with a plus ,normal,negative offset with a corresponding hight offset
Now looking at the web all show a two stage operation
If you could spare the time to explain the Stefan way including the calculation for the gear cutter selection I am sure it would help others and me
The ones I have made have worked for the govener drive for a model steam engine last set was a 1 to 2 ratio so the blank angles were not 45 deg.
In anticipation Stuart
Immer wieder faszinierend, was du da so produzierst. Danke fuer die tollen Videos!
Immer wieder gerne :)
Hello Stefan from Aus. How did you align the shaper tool with the cutting edge horizontal prior to adjusting for side to side?
Ich vermisse diese Arbeit. Ich bin selber Feinwerkmechanikermeister und mir felht die manuelle Arbeit. Danke für die Filme.
Stefan im looking for goggles for magnifying fine work. Ive bought eye pieces and they are ok and i bought jewelers glasses but the focus on them is too close. Id like something that i wear leaving my hands free, giving good magnification errr x10 maybe but focused at desk distance when seated. Have you used something thats good for this ? Great work by the way. Nicely done.
Cutting key ways with a file is a pain. last time I did one, I made a jig using a windshield wiper motor with a small crank arm and a file on the end of a long connecting rod. Turned it on and let it do its thing while I worked on something else. I've seen shaper attachments for bridgeports but I just don't do enough key ways to justify the price.
Very nice. I imagine the part was more accurate and finished better than the original.
No one ever fubars the indexing. :)
"so I don't fubar that, not that I ever did that". I enjoy your injections of humor.
You mentioned that when cutting the keyway on the shaper the clapper box was locked down so the "clapper didn't clap".
I have had little practical experience using a shaper and hope you would explain why and when a clapper needs to clap and conversely, when it does not. Thank you.
The "clapping" allows the tool to swing away on the backstroke, not to rub over the work. When workign in a bore, that can cause a nice crash - so you lock down the clapper box and feed the tool down only when it is not in contact with the work
Wacken, hope you seen a few great shows there, could think of a few heavy shows i would love to see there... cool, love all of your videos, extremely entertaining, loved you the characters from This Old Tony... from Louisiana, USA
I was 2005, 06 and 07 in Wacken and we had realy a blast watching the shows :D
Thanks for watching and commenting!
Very good! Did you recreate the trapezoidal tooth profile, or was squaire sufficanet? My thinking was to lower the cutter and retard the part a few deg. Then raise the cutter and advance the part a few deg.
another quality piece, on a couple of levels. quick question, what is your opinion of dividing plates on a rotary table vs an indexing head, useability and what not?
Brilliantly done and we'll explained as usual ,as usual say, if you think things through its possible to make some complicated items thanks for another good vid
Top quality part Stefan really looked the business nice video.
Step by step, one step at a time. and use what tools you have. Good advice Stefan, some people give up way too soon.
Nice project Stefan, enjoyed this content.
The little oven you are using, what are your views on it? I have been looking on Ebay for one, and they are not very expensive. Would you buy one again if you needed one, or a different model?
Very nice Stefan. And, I agree, you can make machine parts in your shop even if you only have a lathe.
Nice work as usual. You probably thought about how widening the teeth cuts by changing the cutter height produces a different geometry than widening by slightly changing the angle. How did you decide which method to use?
High quality work as always Stefan.
Nice job Stefan. (as usual :-)). But, take more care of those fingers!
Thanks!
My better half tells me the same all the time - I try! Realy :D
I was scrolling to make this same comment :)
Sweet lookin part Stefan, looks factory! 👍🏼
Thanks! You just got a subscriber ;)
Thanks!, much better than losing one! 😉
Fine job Sir. ... Every time I watch you playing with your shaper... makes me desire one more and more every time.. some day..
Stefan, I was very interested in the video series where you reworked your rotary table. But, I don't remember seeing the dividing wheel hardware. Did you make these parts, or did they come with the dividing wheel? If you made them, it seems like something you would have done during your series of videos where you were improving the rotary table. I'm just a little bemused. Thanks
Oh, those came with the rotary table. Dividing plates, the indexpin/arm assembly and the sector arms.
Beautiful end result Stefan! Since you mentioned various ways of making something like this, why didn't you use the shaper to cut the teeth?
Thanks! The mill is way faster.
Hi Stefan How would you go about it if you did not have a shaper?
My Wife was on the computer when the notification appeared in the bottom corner. Had me pacing up and down the room trying not to look interested until she had gone.
Inspiring work again Stefan well done. Use of the word 'Fubar' made me spit out my coffee !
your hair is so bomb in the intro.
very nice job stefan
I might have missed this, but when slitting why do you climb mill. It seems that milling in the standard direction would have been just as effective.
Watch closely, its conventionell milling :)
Stefan Gotteswinter Some strangeness with frame rate and rotation I guess. Looking at the tool it still looks like climb milling. Looking at the arbor and spindle it certainly does not. Thanks for clarifying!
Good vid Stefan. You take pride in your work in every video.
Now, brass tax: Why does your TEFC lathe motor have the centrifugal fan cover exposed to coolant and swarf in the back ( lower chip guard). Is that an after thought guard? It should have protection...no?
Please keep making vids, learned a lot from you.
Great work Stefan!
verry nice finish on that wheel!
Nice Setup Stefan! I really like the mag-chuck on your lathe! Where did you get it and whats the RPM load? Thanks!
Very good ! excellent work for your shaper.
Beautifull part !
"You can make it" ? No, i can't. You can ! 🙂
Thanks for sharing !
Thank you!
Thanks Stefan! Nice to see you in a video!!