OH MY GOSH!!!!!Who know there was a video for almost everything on RUclips. I put the subject and problem in the search box and could not believe my eyes when this came up. After much saying of bad words and unbelief at how this got off in the first place, I found this video. Haven't tried yet but it feels better just knowing I am not the only out there who can't make holiday cookies because I can't get my cookie press back together. Even if I can't get it back right, many many many thanks for taking the time to make this video.
I want to thank you so much for saving our day and our Christmas!!! We futzed with this for what seemed like forever and were almost ready to give up but you helped us figure it out! Thanks so much.
This video ROCKS! The press comes apart easily, but I struggle each year (often 10 to 15 min) because I can't remember or figure out the necessary trick. Now, I followed along and got mine together in 30 seconds. **Don't use an alternate vid where they use a screwdriver and pliers to complete disassemble a press, unless that's really what you need to do!
omg, you did it the hard way. You could have just pulled off the circular plunger plate and then pulled the Rod out and then the Ring Cap slides over the whole thing with ease. You then slide the Rod back through the hole and push the plunger disc back on. done!
I've been trying for over 3 hours and I can't get the last part (the black surface that holds the lever) to level up and fit in the ring which screws onto the barrel. I've literally taken it apart - unscrewed top and bottom... It's driving me made - I've lost my patience! It's brand new, or else I would've thrown it away! I wish the idiots who prepared the manual would specify not to remove the lever when washing. Thanks for your video anyway! Mine isn't the same brand as yours, it's a KEFU, but it works the same...
Hey! If it doesn't squeeze out any dough, it might be the mechanism that locks in to the teeth that's broken. If that's the case, we'd have to replace it. Can you send us an email at support@zulay.net so we can make it up to you?
Hi Cory, could you help me. I have the same cookie gun, but one piece of the mechanism has fall off...could you tell me where it goes? Can I hvae your email so I can send you the picture of the piece...
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
OH MY GOSH!!!!!Who know there was a video for almost everything on RUclips. I put the subject and problem in the search box and could not believe my eyes when this came up. After much saying of bad words and unbelief at how this got off in the first place, I found this video. Haven't tried yet but it feels better just knowing I am not the only out there who can't make holiday cookies because I can't get my cookie press back together. Even if I can't get it back right, many many many thanks for taking the time to make this video.
I want to thank you so much for saving our day and our Christmas!!! We futzed with this for what seemed like forever and were almost ready to give up but you helped us figure it out! Thanks so much.
Glad I could help! 😊
You just saved Thanksgiving!
This video ROCKS! The press comes apart easily, but I struggle each year (often 10 to 15 min) because I can't remember or figure out the necessary trick. Now, I followed along and got mine together in 30 seconds. **Don't use an alternate vid where they use a screwdriver and pliers to complete disassemble a press, unless that's really what you need to do!
Glad we helped! 😊
Thank you SO MUCH! You single handedly saved Christmas!
Our pleasure! 😊
Thanks for the video. I was ready to toss mine and buy a new one until I saw you you repair yours. You save me $30.
Great to hear! 😊
You saved Christmas 2023.
omg, you did it the hard way.
You could have just pulled off the circular plunger plate and then pulled the Rod out and then the Ring Cap slides over the whole thing with ease.
You then slide the Rod back through the hole and push the plunger disc back on. done!
❤❤❤❤thank you very much 👌🏻الله يصلح ايامك ويهديك صلحتها اخيرا اشكرك الله يهديك ويجعلك من اخواني المسلمين
No problem! 😀
Damn, you're a life saver! Thank you
Thanks, you saved the day🎉
Great video
How can I prevent that the lid jumps off while pressing?
Hi! Please reach out to support@zulay.net so we can help you out. 😊
Luckily I found this video! Thanks
I managed to fix it back 🤗
Glad it helped! 😊
Life saver! Thank you, Cory.
Absolutely!! ♥
thank you so much u save my money to buy a new
Thank you very much
I've been trying for over 3 hours and I can't get the last part (the black surface that holds the lever) to level up and fit in the ring which screws onto the barrel. I've literally taken it apart - unscrewed top and bottom... It's driving me made - I've lost my patience! It's brand new, or else I would've thrown it away! I wish the idiots who prepared the manual would specify not to remove the lever when washing. Thanks for your video anyway! Mine isn't the same brand as yours, it's a KEFU, but it works the same...
Hello! I'm really sorry you had a bad time, with your cookie press
Thank you so much for this video...
Most welcome 😊
Thank you!!!!!!❤
You are the man.
thank you you to my darling
Snap the "regulator" off. Have your cookies thick.
Thank you soooo much
Thank you my darlin
Thank you!!!!
You're welcome! 😊
thank you so much
You're welcome! 😊
Thank you, thank you, thank you!!!
You are so welcome! 😊
What if this happens to a plastic one
my biscuit maker is not pressing the batter. it’s new and m using it for 1st time
Mine too
Hey! If it doesn't squeeze out any dough, it might be the mechanism that locks in to the teeth that's broken. If that's the case, we'd have to replace it. Can you send us an email at support@zulay.net so we can make it up to you?
@@rashidagh3530 Hi there! Can you send us an email at support@zulay.net so we can help you out?
Hi Cory, could you help me. I have the same cookie gun, but one piece of the mechanism has fall off...could you tell me where it goes?
Can I hvae your email so I can send you the picture of the piece...
Hi Matija! Thanks for reaching out! We'd absolutely love to help you. Can you send all the info to support@zulay.net?
unable to unscrew lid with cookie press?
Hi there! Can you send us an email at support@zulay.net so we can help you out?
I love you
Aww thanks! Much love! ♥
I threw 2
Silly product