DIY PARKSIDE Battery Adapter from PVC Pipe You no longer need a 3D Printer
HTML-код
- Опубликовано: 16 апр 2022
- #ErCanEverything #Parkside #BatteryAdapter
💥In this video you watched how I'm turned PVC Pipe to Parkside Battery Adapter
👇Subscribe to my Channel🙏🙏🙏
/ ercaneverything
Facebook👉 ercaneverything
Instagram👉 / ercaneverything
2.nd Part👇
DIY Powerful PARKSIDE Working LED Adapter at Home with Materials at Hand
💥 • DIY Powerful PARKSIDE ...
DIY SMD Desoldering Station from old Coffee Maker
👉 • DIY SMD Desoldering St...
Black & Decker Reverse Switch problem Fixing (Just Forward Function is Working)
👉 • Black & Decker Reverse...
Fix TV Backlight LED's | Black screen on working TV
👉 • Fix TV Backlight LED's...
Not Charging Parkside Battery! Charger leds is blinking and Cell balancing problem. How I Fix it?
👉 • Not Charging Parkside ...
PARKSIDE Precision Toolkit 66 pieces and Crimping Pliers set - Unboxing and Review
👉 • PARKSIDE Precision Too...
How to Convert 12v 7Ah Lead Acid Battery Into 12v 16.8Ah Li-Ion Battery Pack and 50400mAh Power Bank
👉 • How to Convert 12v 7Ah...
Fix TV Backlight Overcurrent Protection Circuit on Finlux TV VESTEL 17IPS71 Power Board
👉 • Fix TV Backlight Overc...
UNI-T UT210E AC/DC Digital Mini Clamp Meter True RMS 2000 Counts 0.001A milliamp Clamp Meter
👉 • UNI-T UT210E AC/DC Dig...
DIY simple inverter 12V to 220V using IRF3205 MosFet and C4106 NPN Transistors 500W Inverter Circuit
👉 • DIY simple inverter 12...
Einhell GE-LC 36/35 Li - Solo Unboxing, Review and Comparison with PARKSIDE PKSA 40-Li A1 Chain Saw
👉 • Einhell GE-LC 36/35 Li...
Non functioning PARKSIDE 8Ah Smart Battery - now I Fixed it!
👉 • Non functioning PARKSI...
Heat Treatment Process with Water - Hardening and Tempering | Закаляване на стомана със вода
👉 • Heat Treatment Process...
DIY Wiper Motor Powered Electric Nut/Walnut Cracker from Scrap | El yapımı Ceviz kırma makinası
👉 • Do Not Throw Away your...
PARKSIDE Cordless Chainsaw Dual Battery 40V PKSA 40-Li A1 Unboxing, Disassembly and Assasembly
👉 • PARKSIDE Cordless Chai...
SAMSUNG Galaxy S22 Ultra 5G Unboxing! 512GB Green 12GB RAM, Galaxy Buds Pro, 45W Super Fast Charger
👉 • SAMSUNG Galaxy S22 Ult...
8A DC-DC Adjustable CC CV Step down buck converter 7V-36V to 1.5V-35V 12V 24V Power Supply battery charging LED driver
👉a.aliexpress.com/_vTiR2M
Repairing PARKSIDE PLG 20 A3 4.5A Charger
👉 • Repairing PARKSIDE PLG...
12V Switching Power Supply to Car Battery Charger (DIY from LED Driver)
👉 • How to make 12V Batter...
PARKSIDE Cordless Planer Akku-Hobel Robot sans fill PPHA 20-Li A1 Unbox, Review, Test & Disassembly
👉 • PARKSIDE Cordless Plan...
Restoration of an 12 year old Table Saw instead of throwing it away for scrap. using PARKSIDE disc
👉 • Restoration of 12 year...
DIY Plasma Burner
Make your own Plasma Burner like a Plasma Lighter, with materials at hand
👉 • Video
DIY 20 000 mAh QC3.0 Supported Parkside Power Bank from 20V 4Ah Parkside Battery! Just for $1
👉 • DIY 20 000 mAh QC3.0 S...
DIY Rotating Table Platform from Mocrowave oven motor and Gramophone record holder
👉 • DIY Rotating Table Pla...
PARKSIDE Angle Grinder Extreme Stop vs Fast Stop (which Grinder stops first? Performance or Green?)
👉 • PARKSIDE Angle Grinder...
PARKSIDE Battery Powered, 60V 18A 1080W Professional Power Supply from RIDEN (RD6018W Wireless)
👉 • PARKSIDE Battery Power...
IRFZ44N Powered Induction Heater Experiment with Parkside X20V Battery on 12V 55W and 240V 100W Bulb
👉 • IRFZ44N Powered Induct...
PARKSIDE PLG 20 A3 4.5A Charger Upgrade (Adding Capacity, Voltage, Power and Current Meter in One)
👉 • PARKSIDE PLG 20 A3 4.5...
How to Build a Wooden Kids Swing at Home (DIY Project with Parkside Drill and Hilti Circular Saw)
👉 • How to Build a Wooden ...
PARKSIDE 226Nm Cordless Impact Driver PDSSAP 20-Li A1 Upgrade from 1/4 to 1/2 Compact Impact Wrench
👉 • PARKSIDE 226Nm Cordles...
PARKSIDE Performance Cordless JigSaw PSSPA 20-li A1 Review, Disassemble and Testing Brushless Motor
👉 • PARKSIDE Performance C...
#Homemadetools 
Хобби
The conclusion is that it is cheaper, faster and easier to find someone with a 3D printer :)))) Thanks for the video and your efforts. You rock!
This man inspired the creation of the original 3D printer.
Благодарю за видео!
За творческий подход. Умение создавать и дельться с другими людьми.
Да! Именно таким должно быть человеческое общество. Единым и счастливым, добрым и радостным.
Большое спасибо за добрые пожелания🙏🤝🤝🤝
Wau, nice, without any fancy costly tools, nobody has at hand, thx, also useable for other brands of batteries, thank you for the inspiration
The adapter is very sleek 👍 and the process is adaptable to any tool batteries with tools and materials to hand.
Well done again 👌
Thank you🙏
ربي يحميك ويحفظك ويسعدك ويوفقك انت مبدع انت رائع جدا جدا جدا جدا جدا جزاك الله خير وصحه وعافيه وسائر المسلمين اجمعين
Благодарю Вас за ваше видео🎉!
Прошёл уже год, как я установил переходник на макитовскую платформу в кромочный фрезер. 😊🙏👍!
Всё работает отлично.
Удачи всем.
Super sekali brow. Tks sharing 👍👍👍
Excelente, bom trabalho
гарна робота !
Great work, I will rebuild it.🎉👍
Thank you for this video,its exactly what i needed to connect einhells battery to a old AEG cordless drill.Instead of using peace of metal i used spade male crimp connector.
Amazon power wheels adapter 20 bucks
Надзвичайний молодець!Не тільки вигадав,як це зробити,але й елегантно втілив свій задум.
Thank you my Friend🙏🙂🤝
Благодаря ти!
Няма за какво🤝
excellent idea!!!
Very well done, in turning a section of plastic pipe into a battery adaptor
Thank you my Friend🙏🙂🤝
I just bought a makita adapter for just 2 dollars and Im happy 😁
딱 제 스타일이네요
Un trabajo bien echó 👍
Alright thank you thankyou
excelente se agradece su aporte
Здорово! Не знал что так можно трубу изогнуть! Хотел на али экспресс купить, но думаю так же сделать.
Wonderfull!, exactly what I was looking for to connect my 4Ah Parkside battery to an old electric pruner whose cad ni batteries are dead.
Amazon sells these 20 bucks, called power wheels adapter
Супер. Много полезно, както винаги!
Благодаря Приятелю🙏🤝
Simple and practical! well done My Friend :)
Thank you my Friend🙏🤝
Looks really good! Great skills! 👌
Thank you Bro.🙏🙂🤝
Hola excelente video, podrías dejas las medidas? Saludo desde Colombia 👍👍
Mac ErCan 👍
Уникално видео, Благодаря, удоволствие е да се види такова съвършенство. Скоро правих адаптер но от няколко слоя пластмаса, но този ми харесва повече и е по лесен за направа. Важното е човек да може да мисли правилно и творчески а с 3д принтер всеки може. Още веднъж Благодаря за хубавата идея.
Благодаря ти много🙏
Радвам се щом ти е харесало🙂
Good idea
your ideas are always amazing my brother.....very impressive and inspiring👍👍👍👍
Thank you my Friend🙏🤝🙂
Interesting video. I suggest adding a fuse and cable strain relief. Shorting out that battery will quickly start a fire.
Thank you🙏
I suppose the battery has short circuit protection inside, as I saw a current sensor.
Yes, there is a fuse inside the battery, it is also used to measure current
BRAVO
Best options:
Buy a 15,- 3d pen. Very useful for many things. Put some aluminium foil on the battery first. Then just fill in the important things with the 3d pen. Do the same to the receiving tool. Then bond the 2 parts together. It will be an ugly thing but it will work.
Or make something with epoxy.
Nice work , now try the opposite way solar panel 5 amps to the parkside or the adaptor on the parkside coffee machine with solarpanel .... nice work
Very nice !! 👍👍
Thank you🙏🤝
Super bravo👍👍👍👍
Thank you🙂🤝🤝🤝
Great 👏👏👏
Thank you my Friend🙏🤝
Very very nice
Nice job ER
Battery Adapter
👍👍👍
Goodjob 👍🏾👍🏾👍🏾
Thank you🙏🤝
Well done
Thank you🙂🤝
Bravo. C'est pour la beauté du geste car on en trouve à 3 € sur le net.
awesome 😍
Thank you🙂🤝
Super..waiting on part two..on the Tool side! This is only 1/2 of adapter what i need..😘
I'm glad if you liked it, I used this adapter to make a working light.
And tis is the video 2.nd Part
👉ruclips.net/video/n9la9bxYzzs/видео.html
Amazon sells these, seach dewalt to Milwaukee or whatever brands you have, they are called power wheels adapter
Скобку согнул из мягкого алюминия 2 мм. вырезал под контакты отверстия с запасом, прикрепил заклепками текстолит с вклеенными контактами.
Good work 👍
Thank you my Friend🙂🤝
Nice job 👍
Thank you🙏🤝🤝🤝
Very good job
Thank you🙂
Я так же зделал адаптер и состыковал макитовский разъём фрезера DRILLPRO с аккумуляторами NAWIN. Просто у меня уже были такие аккумуторы. Всё подошло очень плотно.
Miesiąc temu zrobiłem podobnie 👍👍👍🇵🇱
Wiesz może co to za klej?
Why don't I know why you ask?
@@ErCanEverything what kind of glue, to glue the PVC together. It's not "Super Glue"?
I used regular super glue.
very nice beautiful
Thank you🙏🤝
God jop bro 👍👍👍👏👏👏👏
Thank you mu Friend🙏🙂🤝
Най-честното споделяне
Благодаря🙏🤝🤝🤝
Some stuff I do believe it's cool to make on your own but when stuff like this is already made to perfection and at a very cheap price better sense to buy it. I buy them all the time. $10 to $14 tops.
Wow
👍👍👍
👌
Доста си се заиграл. Мисля, че е време да се оборудваш и с 3D принтер. За пореден път ще кажа, че имаш много прецизни ръце. Поздрави!
Замислил съм това, трябва да закупя един🤔
make an adapter for abattery and a different brand tool
👏👏👏👏
Teşekkür ederim dostum🙏🤝
👍👍👍👍
Идеално,
кефи ме идеята без 3д принтер. Не че е прекалено скъпо ама с подръчни материали си е най забавно
Благодаря Приятелю🙏
Предстои ми да направя някакво изобретение със този адаптер, просто се чудех дали да поръчвам 3D принтиран адаптер, и ми се хрумна идеята🙂
Отлична работа! Аз присадих такава батерия на винтоверт риоби, съжалявам че не снимах процеса на адаптация.
Благодаря🙂🤝
🙏👍
Use ABS plastic for extra strength
👍👍👍🔥🔥🔥👏👏👏
Impresora tresde: 😴😴
Pistola de calor: 🤑🤑😎
Wouldn’t bother,they are cheap to buy, I am adapting Ryobi tools to Makita batteries at the moment
I already bought a 3D printer🙂
ruclips.net/video/BJnTbaggo8U/видео.html
Sao ko làm bằng đồng để dẫn điện cho tốt.đồng được xi mạ để chống oxi hóa.chứ nó không phải bằng sắt.
Year lata 😂 nice
Dont cut metal with that grinder mine failed killed controller after a kick back magic smoke 😂
Make one to fit the drill and double connect for multiple battery and charger
Can you make conector to charge battery offgrid on solar?
Zwei Flachstecker hätten ausgereicht. Aber man kann nicht immer verhindern, dass Leute ihre Lebenszeit freiwillig verschwenden.
What type of metal you used as connector point
Some piece of Stainless steel L316
только я могу смотреть это минимум на 1.75?
Can you make tool side adapters too?
You run the wires to the terminals on the tool but Amazon sells all the adapters anyway 20 bucks, search you tool and adapter
Qu’elle est l’utilité concrète de cette adaptateur ? 🤔
I'm used for this LED Lamp
ruclips.net/video/n9la9bxYzzs/видео.html
If that's an 18 V battery, that H1 halogen lamp will be *toast* in a very short time...
For 1 second it can last, however the lamp is for testing🙂
I used the adapter for the LED lamp, you can see it in this video: ruclips.net/video/n9la9bxYzzs/видео.html
🙋👍👍👍💞😘💞
интересное решение. но какое практическое применение, кроме света?
If you ask me, I can say that I use for everything where i need battery power.
I don't have a 3D printer and decided that video might be useful.
In this video ruclips.net/video/bWuANoC3T0g/видео.html I would use this method instead of a printed adapter.
Dijual gak om
Metal used?
mais pourquoi se compliquer la vie alors qu'il fallait juste mettre les fil directement sur les bornes + et - ?
эт кому делать нех.упростить в разы можно.
DIY PARKSIDE Battery Adapter from PVC Pipe You no longer need a 3D Printer
Why cover the terminals in the end? Now it won’t fit on the battery and wouldn’t work if it did.
For protection from the paint
@@alexpanzer2601 I couldn’t even tell he was painting it.
Take a look at 16:20
Не понятно для чего автор зделал эту штуку , переходники продаются !!!
За да има разнообразие, получи се много готино
Can u share the STL files
🤔🤣
This is a DIY Channel! STL File is my Hands. it's very easy to print on a 3D printer🙂
ruclips.net/video/BJnTbaggo8U/видео.html
Kabloyu boyamasaydın iyiydi.
And then what?
2.nd Part: ruclips.net/video/n9la9bxYzzs/видео.html
I like fabrication! Nice to know what you can do when the stores are empty, you have no money, or don't have the mark of the Beast. Tough times coming!
You could have used cad software to design an adapter and use a 3D printer to make this part.
Like this one?
ruclips.net/video/bWuANoC3T0g/видео.html
L
Файно вийшло
Слава Україні Героям Слава 🇺🇦
Nothing like breathing fresh melted plastic just to save 15 Euro by not buying adapter from the internet.
Don't do it then?
You must have no brain if you are sitting there breathing it in use a mask common sense and the cut was half a second 😂@MrDelgrigorov
a pars la pub gratuite pour PARKSIDE on a rien de quoi 🤔🤔🤔🤔🤔🤔🤔🤔 en faire un flan !!!!!!!!
Freak
I 3d printed this in 30 mins
Okay it's creative but you risked your fingers a few times to save a few dollars. Hmmm
These are only 10 to 20 bucks on Amazon, not worth the time to build it, they are called power wheels adapter but they also sell battery adapter to fit all drills or tools to use other batteries ,
Seach dewalt to Milwaukee or whatever your tool are