Parkside X20V Battery Outlet Universal Adapter for Testing Charging and Powering other devices
HTML-код
- Опубликовано: 5 мар 2022
- I have designed a simple and nice output voltage adapter for all Parkside X20V PAP series batteries. One version is with an external terminal block connected with a two wire lead, and the other version is connected with a thicker lead that can be clipped to an integrated terminal block on the adapter body. I used the proven WAGO 221 lever clamps as terminal blocks, which can tolerate higher currents and a wide range of wire diameters.
A simple version of the battery outlet can also be mounted to a panel or wall with screws. The adapter can then also serve as a battery holder. For panel mounting, it is better to use suitable spacing between the battery outlet and the panel, due to the offset from the substrate to allow the battery to be ejected.
Commonly available insulated or non-insulated Faston crimp connectors are sufficient to make the contacts
All 3D models can be purchased from this link:
cults3d.com/en/3d-model/tool/... 
Наука
Thanks! I was planning to design something similar, but decided to look for solutions already done on the internet. This is the best one so far!
Nicely designed, very production-like 👌🏻
Searching similar adapters for mine, got many those batteries insanely cheap
love this split type of battery adapter. much better for printing.
That was my idea in designing it. Thank you
@@Tech-3D usualy i print them in vertical all in on. But this gives more options
Almost perfect
Muy bueno!. Enhorabuena por el trabajo!.
Gracias.
What a magnificent work, my sincere congratulations. I've never seen a more perfect, simple and practical adapter. Great
Thanks for sharing.
Where I can buy?
Thank you very much. You can buy a 3D model, print it and make it yourself. See description below the video.
@@Tech-3DHello. We've been talking here for a long time but unfortunately I had serious health problems. Now I'm back. Please tell me if you sell the 3d model of these adapters for parkside, I would like to make one for myself, thank you, best regards
Magnífico, gracias por el aporte 👌💯👋
Gracias
C'est amusant de voir, comme nous sommes plusieurs à réaliser simultanément ce genre d'adaptation.
Sans avoir aucune relation ou
Informations précédemment.
Personnellement c'était pour pouvoir utiliser de vielle perceuses sur batterie dont celle d'origine était Hors Service.
Mes montage sont par contre beaucoup plus rustique et primitif.
Je vous félicite pour vos réalisation et le partage.
Merci.
I would only use it with recent smart battery version, since older ones don't have any under voltage protection in battery.
That's a matter of what's attached to it. If it is used to connect an artificial load, for the sake of capacity testing, the undervoltage protection will be set on the artificial load. If it is used to connect a DC/DC converter, the undervoltage protection will be set on the converter. Otherwise, the undervoltage protection can always be solved externally. However, I don't address the electrical connection of the various loads to the Parkside batteries in this post, so feel free to just let it be used for new batteries with undervoltage protection.
Samer battery also doesn't have bms
@@Tech-3D What type of "external protection" could i use? Maybe aliexpress link?
@@seakyle8320 For example, a car fuse on the cable.
ruclips.net/video/1zdEcPNiQL0/видео.html add external mosfet
Hi, I am trying to use the Parkside 20V batteries instead of V-mount batteries for film equipment.
As I see it I have to transform the voltage. Any hints with what I can do this easily and also keeping it compact/sturdy?
Vmount is 14,8V nominal. The minimum is likely around 12 V the max 16.8V.
Any tips appericated!
Thanks a lot
This depends on the required current draw. The easiest way to do this is to use a ready-made DC/DC converter module, so called step down converter or buck converter and add a deep discharge prevention module that disconnects the Parkside battery. Such modules are cheap and available from China or from some local vendors just about everywhere.
@@Tech-3D Thank you! Do you know whether there are readymade ones which are in a case or like waterproof?
Also it seems they all need ventialation for so much watt
Perfeito, parabéns
Obrigado
Nice adapter! If I May ask, wich tool/glue are you using at 01:07 on vídeo?
www.steinel.de/en/tools/products-oxid/hot-glue/accessories/glue-sticks/glue-sticks-11-mm-black-006792.html
BRAVO
Thank you
Y gracias , voy mirar com se hace en la web para pedir, en momento no me entero de nada pero boy continuar aprendiendo. Pues tengo que comprar unas cuantas.
Tengo un anuncio de venta en Eslovaquia aquí: dom.bazos.sk/inzerat/137367570/adapter-pre-parkside-x20v-baterie-pap-20-aku.php. ¿A qué país le gustaría enviarlo?
Hello! What glue did you use to glue the plastic elements together?
Universal Glue from Patex Henkel or any Super Glue
Buen video, que silicona usas para hacer el relleno ?
www.steinel.de/en/tools/products-oxid/hot-glue/accessories/glue-sticks/glue-sticks-11-mm-black-006792.html
do they have low voltage cutoff or do i have to check voltage levels?
Depends on the version of the connected battery
Which version have low voltage cutoff?
👍👍👍🤝🤝🤝
Thank you
Ste priamo z BB? Mal by som záujem o kúpu tohto adaptéra. Je možné sa nejako dohodnúť a stretnúť? Ďakujem
Ano, priamo. Ďalšie informácie sú tu: dom.bazos.sk/inzerat/148551842/adapter-pre-parkside-x20v-baterie-pap-20-aku.php
Super, vďaka, ozvem sa cez email
How you secure the two wago clamps not to move?
It is about the design and construction of the holder.
I am using your holder from cults
Dobrý den videl som video na parkside bateriu a chcel bi som sa spitat či by ste vedelo vyrobiť taký isti adapter ale na dewalt bateriu DCBP034E2
Určite by to išlo vyrobiť ale žiadne DeWALT batérie nemám. Tým pádom to nemám podľa čoho vymodelovať a reálne vyskúšať = prototypovať. Neviem či a aký by bol záujem o takéto adaptéry na DeWALT batérie, preto ak by som si započítal do výroby prvého kusu adaptéra aj náklady na testovacie prorotypové výtlačky a čas pri tom strávený, jeho cena by niekoľko krát prevyšovala cenu adaptéru na Parkside. Preto neviem, či by sa to vlastne vám aj mne oplatilo.
what is the name of that red plastic? and where can i order it?
Bloody Red - Spectrum Filaments
@@Tech-3D was it created by you? can i buy it somewhere?
Hallo, kann man diese auch bei dir erwerben?
Hallo, ja, die gibt es.Der Preis liegt zwischen 8 und 15 Euro, je nach Ausführung, ob ein fertiger Adapter oder ein Halbfertigprodukt zum Selbermachen, plus Versand ins Ausland. Oder Sie können 3D-Modelle für den 3D-Druck kaufen und es komplett selbst machen.
@@Tech-3D wie können wir privater in Kontakt treten? Hätte Interesse an welchen zum zusammenbauen. Woher kommen Sie?
@@TheThoCraft Auf der Karte "Informationen" des Tech 3D RUclips-Kanals ist eine E-Mail-Adresse angegeben.
nem tudja tulmeríteni az akkukat?
Azt hiszem, nem értem a kérdést.
De igen. Kell egy kűlsö elektronika felügyelet.
Az akuban levő BSM nem látja el a feladatot ?
Podrías venderlos onlile.
Vendo en Eslovaquia :-) Pero también puedes hacerlos tú mismo, sólo tienes que comprar un modelo 3D
Ok.