yes there is a tool if someone hasn't told you by now, you can get them at most any store that sells car tools and it looks like a pair or pliers but pull apart when squeezed and makes the job a cake walk.
Hello English RC I have a question this parts that you showed in the vide works for traxxas revo 3.3 and I was wondering where you ordered thanks amazing video
Hey my British friend! How are you? I must've missed this vid when you first uploaded it but I'm glad you finally got your steel gears for your revo. The things gotta be near bullet proof now lol. I'm getting my 8ight t 2.0 brushless truggy ready for this year tonight. Can't run it till spring but I've got a lot of setting up to do. It's so damn cold here though lately. Hasn't been above freezing in at least 2 weeks. Ha
Good to hear from you mate I'm late with reply but I think I'll be notified now so that's cool. I've seen your 8t are you still running it. I haven't even ran the revo with these yet lol. I've got a new era mount now so going to fit an lrp28 soon I hope.
English-RC you have the picco in it now right? If you want to sell the picco be sure to hit me up! Getting a revo soon hopefully and would love to throw a picco in it!! Also do you mean the losi 8T or team associated (factory team) rc8t ? Lol
Dan Mccumber Hi, its a robinsons racing products set. I went with the widest ratio possible with the optional 2nd gear and the wide ratio set aswel. I think the 2nd gear was a 43t i could be wrong tho. Sorry ive taken so long to reply, if you are still intrested in doing this mod either for the revo or tmaxx. Im happy to help anyway i can. Thanks for the view comment and like.
hola compre una caja Robinson Racing Steel Forward Only Gear Kit (Standard Ratio) (3.3 Only) pero no traia los SHIMS me podrias ayudar con la medida para poderlos comprar gracias
@@velsor86 no it’s a two speed, well it’s supposed to be. My damn second gear just spins. I’ve no idea as to how it’s supposed to grab anything. There’s nothing! And the “electric clutch” or what he spoke of, the shiny circle, it seems like it would maybe work if it were made backwards. But that doesn’t work either.
You can just go on Amazon and get some 5mm hardened steel shafts and mod1 pinion gears and convert your trans to single speed no reverse. You'll need to reuse the spur gear shaft.
Throw away first gear, Dremel grooves in throw out mechanism inside the second gear to match up with 4 of the holes in second gear...take 4 m4 screws and thread into second gear aligning up with grooves in the metal throw out thing to holes.......now it's full positive traction for brushless electric.....only way to do it to electric..of gears are all metal, you'll have to tap threads into holes...if plastic just thread them into holes, it'll cut it's own threads
2001pontiacta Hi they are robinsons racing products steel foc kit. You mayb able to just instal a single gear and improve the durability. The forums will say which gear for sure. But i think its 1st gear they recommend swapping.
As long as everything is aligned it should work have it placed like the video then for the case on so yoy know the gears are in place or you can try to fit it the other way super easy there a lot of videos of forward only conversions for the revo 3.3 it’s plastic in those videos but same difference hope that helps
Im converting tmaxx3.3 grey transmission and i need to have all metal gears? And if i use theese can i lock up the second gear so i can use electric esc for reverse
Ayden Goldsberry The plyers? They are a tool to take off the horseshoe clips. My baja 5sc had a clip too so i needed them. Great tool to have. Or the gearbox? Thats revo and nitro revo gears are 'robinsons racing products steel foc kit'
I finally got my hands on a Robinson set just like this. And my second gear doesn’t grab. It spins freely either way and the gears on either side of it only spin one way. WTF have I missed???? I’m beyond pissed off as you said the instructions are total SHIT, and this is the only video that I’ve found having nearly anything to do with this. Help!!!!
I gotchu, search up forward only conversion revo 3.3 watch the most recent one from 12-14 days ago take it apart like in video and put it back together make sure to take out all the peices and follow it directly pause video if needed, I broke my revo trans on 3rd day never used a nitro before and I changed it to forward only fairly easily with the video if you neeed anymore help let me know don’t forget to search how to oil those steel gears ⚙️
??? I planned to use an LRP .32 with the New Era engine mount but didn't get to it. Shortening the crank on the .32 halted me. But was still a picco26 revo. Burst 1st gear before. The whole truck was around 12lbs total lol actually. Over powered. My friend built an OS18 vantage lightweight version. I had an rcsolutions tank.
yes there is a tool if someone hasn't told you by now, you can get them at most any store that sells car tools and it looks like a pair or pliers but pull apart when squeezed and makes the job a cake walk.
LOL you take a snap ring off with snap ring pliers. WOW 😳
external retaining ring pliers are for the horse shoe thing
Its called a snap ring and you need nap ring pliers to remove and install. They are a snap to do with the pliers
Hello English RC I have a question this parts that you showed in the vide works for traxxas revo 3.3 and I was wondering where you ordered thanks amazing video
Hey my British friend! How are you? I must've missed this vid when you first uploaded it but I'm glad you finally got your steel gears for your revo. The things gotta be near bullet proof now lol. I'm getting my 8ight t 2.0 brushless truggy ready for this year tonight. Can't run it till spring but I've got a lot of setting up to do. It's so damn cold here though lately. Hasn't been above freezing in at least 2 weeks. Ha
Good to hear from you mate I'm late with reply but I think I'll be notified now so that's cool. I've seen your 8t are you still running it. I haven't even ran the revo with these yet lol. I've got a new era mount now so going to fit an lrp28 soon I hope.
English-RC you have the picco in it now right? If you want to sell the picco be sure to hit me up! Getting a revo soon hopefully and would love to throw a picco in it!! Also do you mean the losi 8T or team associated (factory team) rc8t ? Lol
English-RC HI, Just wondering what steel gear set did you used in your revo 3.3
Dan Mccumber Hi, its a robinsons racing products set.
I went with the widest ratio possible with the optional 2nd gear and the wide ratio set aswel. I think the 2nd gear was a 43t i could be wrong tho.
Sorry ive taken so long to reply, if you are still intrested in doing this mod either for the revo or tmaxx. Im happy to help anyway i can. Thanks for the view comment and like.
Which transmission casing are you using there i can see its a black one but which vehicle did it come out of ?
Please leave all parts names and on line store to buy parts it would help
Where do i purchase the gears can you post the part number and link please?
HI I got RRP #8002 but I'm missing the hex plate that goes around that cir clip . Can you buy separately? An idea part no#
Cheers
Paul
You need snap ring pliers.
Tom Parry
Thanks i just saw the replies and orderd some. I need them for a steering rack now so couldn't have seen it at a better time.
Everytime I put the second gear in it jams up when I put the other half of the cover on
now that u have all steel gears does ur truck perform better
Where can I get these gears ?????
hola compre una caja Robinson Racing Steel Forward Only Gear Kit (Standard Ratio) (3.3 Only) pero no traia los SHIMS me podrias ayudar con la medida para poderlos comprar gracias
is this a single speed trans? if not do they make all metal gears for a single speed... (revo 3.3)
I'm wanting to know the same
Me as well lol.. I’m looking for a steel conversion with a lock in 2nd gear also with reverse.. it looks like both 1st and 2nd are still working.
@@velsor86 no it’s a two speed, well it’s supposed to be. My damn second gear just spins. I’ve no idea as to how it’s supposed to grab anything. There’s nothing! And the “electric clutch” or what he spoke of, the shiny circle, it seems like it would maybe work if it were made backwards. But that doesn’t work either.
You can just go on Amazon and get some 5mm hardened steel shafts and mod1 pinion gears and convert your trans to single speed no reverse. You'll need to reuse the spur gear shaft.
@@jackdurden466 Dude there's a little tab on that aluminum disk that flips out at the proper rpm and locks second gear in.
Hi. I have a revo 3.3 i want to convert to electric. How did the metal gears in transmission work out?
Throw away first gear, Dremel grooves in throw out mechanism inside the second gear to match up with 4 of the holes in second gear...take 4 m4 screws and thread into second gear aligning up with grooves in the metal throw out thing to holes.......now it's full positive traction for brushless electric.....only way to do it to electric..of gears are all metal, you'll have to tap threads into holes...if plastic just thread them into holes, it'll cut it's own threads
@@redblue40rc33 thnx finished a long time ago
where can I find these metal gears to overhaul my trans? thanks
2001pontiacta
Hi they are robinsons racing products steel foc kit.
You mayb able to just instal a single gear and improve the durability. The forums will say which gear for sure. But i think its 1st gear they recommend swapping.
Oh ok thanks for the info!
Is it mandatory to lose reverse when installing these RRP gears?
No its not buddy ive done this four times already haa
Where I can find those gears?
You can find them on amazon
@@samuelyearwood4073 under what search
@@taro_tanakasan9270 following
How did you get the second gear to work?
As long as everything is aligned it should work have it placed like the video then for the case on so yoy know the gears are in place or you can try to fit it the other way super easy there a lot of videos of forward only conversions for the revo 3.3 it’s plastic in those videos but same difference hope that helps
I did this set up for my traxxas but there is a problem with it no reverse and if you convert into electric no reverse ...
I have the doc kit but not metal an I have reverse you must have forgot to put in a gear
Im converting tmaxx3.3 grey transmission and i need to have all metal gears? And if i use theese can i lock up the second gear so i can use electric esc for reverse
Good question. Did u ever find that out? I want to convert my nitro 3.3 revo.
Yes it is the same as if they were plastic....look up videos
Where can I buy one
Where can I buy this?
Oiii
snap ring pliers man lol
Kyle Burke
Thank you very much i just asked what are they called in my latest video. I will order some right now thanks.
English-RC is that for 3.3 revo?
Ayden Goldsberry
The plyers? They are a tool to take off the horseshoe clips. My baja 5sc had a clip too so i needed them. Great tool to have.
Or the gearbox? Thats revo and nitro revo gears are 'robinsons racing products steel foc kit'
Tripod?
circlip pliers
I finally got my hands on a Robinson set just like this. And my second gear doesn’t grab. It spins freely either way and the gears on either side of it only spin one way. WTF have I missed???? I’m beyond pissed off as you said the instructions are total SHIT, and this is the only video that I’ve found having nearly anything to do with this. Help!!!!
😂
I gotchu, search up forward only conversion revo 3.3 watch the most recent one from 12-14 days ago take it apart like in video and put it back together make sure to take out all the peices and follow it directly pause video if needed, I broke my revo trans on 3rd day never used a nitro before and I changed it to forward only fairly easily with the video if you neeed anymore help let me know don’t forget to search how to oil those steel gears ⚙️
$100 later in 10 lb sooner
???
I planned to use an LRP .32 with the New Era engine mount but didn't get to it. Shortening the crank on the .32 halted me. But was still a picco26 revo. Burst 1st gear before.
The whole truck was around 12lbs total lol actually. Over powered.
My friend built an OS18 vantage lightweight version. I had an rcsolutions tank.