D13 Volvo Fuel Issues
HTML-код
- Опубликовано: 20 июл 2024
- New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
In this video, we go over the fuel line placement to conduct the air in the fuel test. Be sure to let the truck idle to purge air out of the system before taking reads.
If this video has helped you in anyway show your appreciation by buying me a coffee ☕️
Cash App:$tatexpress
If you need any repairs done on your truck be sure to give us a shout, our info is below.
Subscribe and ring that notification bell
If you have any questions feel free to reach out to us at
info@tatexpressinc.com
New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
Join our Facebook group
/ 2517634715134383
Check us out on Facebook
/ tatexpressinc
~-~~-~~~-~~-~
Please watch: "TAT Express Live With Francisco Amaya"
• TAT Express Live With ...
~-~~-~~~-~~-~ 
Хобби
Hey Adam this is Marauder man from Fort Myers Florida, thank you for the happy face you always have on, But thank you for providing good and valuable information, I am mechanically inclined but I use your videos for study material and not to mention that I will be getting into a 2018 D 13 Volvo truck, so that will be my study material😆, I enjoy your videos thank you very much👌👍👍
These videos have been helping me with my side work on trucks I’m not familiar with. Subbed 👍
Awesome, thank you!
Sr good morning my problem volvo exaweter engean rpm up down.
Channel growing, great view count, good work! 😉👍
Thanks for the support. Great work yourself Sir! 🇺🇸🔧💪🏼👊🏼🇨🇱
You have the hart of a teacher. I love your work Will you demonstrate how to install Fass system on a Newer Volvo like 2018 and up
what a great truck, super video too. thanks for sharing
INCREDIBLE TRUCKS thanks for watching. Yes very nice Volvo. 🇺🇸🔧👊🏼🇨🇱💪🏼👍🏽
very good Congratulations
Thank you for the video brother!!!
Ulises Gonzalez thanks for watching. 🇺🇸🔧👊🏼🇨🇱💪🏼
Man I wish I was close to your shop !!!! Great content
Maybe one day!
Aww man this day can won’t make it lol
Nice video , I have the same issue air coming out from the return line even after I replaced the injectors and cups , and misfire cylinder 5 fault code come back again
NorthFace thanks for watching. It would be good to check fuel supply. 🇺🇸🔧👊🏼🇨🇱💪🏼
Great video; what line did you connect the fass pump?
Would it work just to unplug the fuel return line at the filter housing and clamp the clear hose to it and run it to the fuel tank from there instead from the head? And just plug the housing? That way I woudn’t have to disconnect the fuel line at both ends
I will like to see updated on that d13 with fast fuel system
Thanks for sharing acknowledge video
Great video bro
Thanks for the support DIY. 🇺🇸🇨🇱🔧🔧👊🏼💪🏼
Good video thanks for sharing.
Thanks for watching. Make sure to sub. 🇺🇸🔧👊🏼🇨🇱💪🏼
Good job men
Thank you sir
Awesome thank you!!!!
You're welcome!
Good morning sir if can tell me why a fuel pump shows up in the cluster window thanks and have a nice day.could it be that I need to replace the filters?.
Hi Adam, where I can buy a plug and hose adapter for the fuel filter housing tool? Thank you in advance for your help.
I have problems after replacing the filter base and injectors and cups dealer now saying possible head? It just keeps bleeding and bleeding my pocketbook
I have an 02 d12 that is getting diesel in the oil,I drove it 200 miles and had about 1 qt. Of diesel showing fuller on the dip stick,truck runs great, starts easy, what can I do? Thanks John
Hey question, my truck is taking forever to start (d13) and it stays misfiring. I got some bubbles in the tank. But her i open the the priming pump it came lose. Do you think its soaking air ? Or my problem is injectors and cups?
Pls is there any disadvantage of that air coming from the return line.i mean does it affect the truck in anyway?
Can installation of fuel filter cause loss of power like engine struggling and shakes .thank you
Thanks.
Thanks for the support
Thanks for the sub , keep it up 👍
Back at you Activelion. 🇺🇸🇺🇸🔧🔧👍🏽👍🏽🇨🇱
I have a 2014 d13 have had the injectors replace knock sensor replaced but still no power going up a steep incline I've had took the truck back to the shop they read the codes but tell me that there's nothing wrong that they can see suggested that the engine harness may need to be replaced cuz it was full of oil now I'm thinking that the oil after the shop replace the injectors I had to take the truck back twice because the valve covers was leaking oil they finally fixed it don't see no oil leaks under the truck check engine fault light is on any help would be greatly appreciated 784892 on the miles
You just post the test but. What make the diesel line getting air what makes the diesel line get all those bubbles. And what you did to fix it. Basically you don’t post after you resolve the problem. Thanks.
Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be
I have a 2013 Prevost with a Volvo d13. Keep getting check fuel filter error message. I don’t see water in the glass bowl , and keep losing power under load or climbs. Very frustrating. Maybe this is the issue?
What’s the size of fittings to plug fuel filter housing
Hi! I have a 2009 Volvo with d13. I have hard time to start. If I prime is starting right the way. I changed the fuel housing and the over flow valve but still not working. Any idea? Thank you!
What software you use for the fuel line diagram?
Can you make a similar video with a Cummins isx how to purge air out the system... I think I had air on my fuel lines because I did not add enough fuel on the fuel water separator filter, but as soon as I switched the primary fuel filter from Baldwin to fleet guard it stopped doing it but still sometimes does it.
Stick, that is a great idea for a video. Make sure to subscribe so that your notified on our next video. 🔧👊💪
Great video would not have thought it was fuel lines, will check my fittings, my 2009 D16 is shuddering under load, what are the symptoms of a plugged EGR cooler, cleaned my plugged Delta P sensor ports and Venturi pipes it coded was filthy and noticed when I put a camera in to look at fins in EGR cooler it was filthy, cleaned front off as best I could through the pipe, also when it regens there is fuel dripping from clamp below 7th injector. Your thoughts? Will check out rest of your vids very very helpful! Nice quality! Thanks
Doug Besplug thanks for watching make sure to subscribe. Shuddering under load could be fuel related or boost related. I would recommend fuel in air test and boost leak test. Clogged EGR should tigger a code and a cleaning would involve removing cooler which would be better to replace with new one instead of reinstalling old one that could eventually fail. The clamp behind injector 7 needs to be replace and also need to make sure 7th injector is not leaking when not in use. Hope this helps. 🔧🇺🇸🇨🇱👊🏼💪🏼
I have read all of the comments. Why is the test only done at idle? Why can’t I do this test on a dyno? My problem does not show up unless under load.
I have a 2010 D3 that will only run for about 30 seconds and only after you pump the hand primer the primate as long as your pumping the hand primer. The truck will stay running as soon as you stop pumping the truck will shut off like it runs out of fuel. I’m thinking of fuel pump. Do you have any advice?
Hi there! Once I had message Check fuel filter right after that in a few miles past truck starts shaking going up to the hill, I stopped turned off the engine then trying to start it again, it started after a long time of cranking. I changed the water separator filter at the shop down the road, after that I don't have issues with shaking on the hills, truck pulls fine idles fine, but this did not resolve the issue with the starting. Truck starts right the way only after prime fuel with the pump on fuel filter assembly now. No matter if engine warm or cold it has long crank before it starts even if I shut it down in one second trying to start it again it will no start good. I drive like this about 8 month now and only starting the truck after the priming. Also I changed fuel filter assembly on the left side of the engine but it didn't help. Water separator does not show any bubbles under the cup and the filters there with orings been charged too many times already. Return line in the tank shows a little bit of bubbles. Was thinking maybe it's time for a new injector cups but for my understanding I the cups are becoming bad it's not going to give a bad staring in one day and like I sad trucks pulls and idling fine with no shakes. What do you think? Tanks
I'm having the same exact problems, what did u do to fix?
I have the exact problem
Did you guys fixed it yet?
Contaminated fuel and debris in the lines ?
Same problem here, what should we do change fuel lines or have air compressor perhaps blow the lines out what you guys did to fix problem
What are you hoping to accomplish with the FASS system? In my experience aerated return fuel without aeration in supply in D13/mp8 is an indicator of combustion leakage into the fuel supply at the conical pintle seat.
Jedidiah, you are correct. We later found a faulty pressure regulator valve located at the front of the head. Thank you for your input.
I can’t see this valve in my d13 ?
I see you are talking about a valve on the front of the head I can’t see any valve on the front, would you tell me how to find it?
I had once my fuel filter partially clogged up and got message on dash display "Check fuel filter" happens I bad not much fuel in tanks and it sucked all dirty fuel from the bottom of tanks. So now I never go less than 25% fuel in tanks to prevent this
Thanks for sharing your experience. Be sure to subscribe and join our lives on Sunday @ 2pm
what is a fast system if thats what u said u were going to install
Where can I get the test line and plug ?
i’m having some issues with my 2013 VnL D13 .. when truck is cold, the rpm is aggressive it pulls great, and after few minutes of driving.. its getting weak!! doesn’t get aggressive anymore.. im barley going up the hill fully loaded..
-fuel pump is new
-injectors are new
-cups are new
-fuel housing is new..
could there be fuel restrictions from debris somewhere in the fuel line.. might of sucked dirt from the bottom of the tanks.. any suggestions will be greatly appreciated.
and also no bubbles in the fuel system.. truck starts right up.. no check engine on.. nothing..
just feels like the Engine has fuel starvation problem.
I am attempting to work on a 2007 volvo vnl with a dd in it. has an issue were you prime it, it runs for a bit then shuts off. you re-prime it and it runs again. I've pressure tested fuel system before davco filter housing and found no leaks. trying to isolate issue...... do you have any part numbers for these test fittings for so i can isolate the issue? only constant code is for injector 5 mechanicals not responding...but it goes away after you prime it well. thinking problem is aeration or a failed injector return. but want to be sure before wasting money. TLDR do you have part numbers for test fittings. has fuel housing with spring primer.
I HAVE D12 VOLVO 2007 CAN YOU REMUVE EGR OR BY PASSIT. THEY SAID YOU CAN'TON D12.
Thanks for your videos!!!
Is there any test for the Cummins ISX 2250?
Pep, yes there is a air in fuel test. Thanks for watching and be sure to hit that sub button
@@TATEXPRESSINC Thanks!!
If a lot of air, what is solution?
Got my own answer to my aeration question.should have paid a little more attn to video.
very good videos friend. I have a problem with a d13. maybe you can help me. change the case of the fuel filter. after that it gives me a fault that turns off and does not work even. I put the computer and the diagnosis was three bad injectors. I changed the injectors but the fault remains. Now the diagnosis was low fuel pressure , I put a new pump and the same problem continues. my question is . what can this be.
Debris in the fuel line from tank to filter?
Donde esta localisado fuel sensor de un volvo semi truck 2004
Great video! Can you elaborate on what size fitting and plug are and where to find them. My local volvo dealer is clueless
I was just going to ask that same question lol
Can you tell me what would cause fuel to leak from the filter housing when filter is removed ?
Check valve maybe?
Could you do a common issues video on this engine
Rodney Watson thanks for watching and yes will do a common issue video for Volvo engines. Make sure to subscribe so you are notified when the video is released.
My 2016 volvo keeps going into limp mode, can you comment on this
Hi
Really good video used it a a few times as a reference, used your tips and also for looking for a boost leaks too, the fuel pump I noticed on my D16 is seeping diesel through the weeping hole, would that cause air in the system and performance issues like stumbling and it’s quite expensive to replace $2000 in Canada, mostly seeps when you start the truck? Noticed with Volvo schematics you have to replace it as a tandem unit the fuel shaft seal is actually in the power steering pump in front of the fuel pump. Also is the seal replaceable? No fuel related codes came up, has engine retarder over speed as a code don’t think that’s related? Great vids very helpful!
Doug Besplug fuel pumps are not suppose to leak. If it’s high mileage I would recommend also changing the fuel filter housing. Thanks for watching 👊🏼🔧🇺🇸💪🏼🇨🇱
Great video! Thanks for this. Do you have any advice for an D16D that seems like its loosing prime?
@Jeese Campbell, you may have a faulty fuel filter housing. Be sure to troubleshoot before condemning any part.
Where are you located I can bring my truck with you?
Where are your shop located?
Could a guy just plumb in a foot or so of clear line before and after cups for quicker diagnosis?
Then again I don't think it'd be worth constantly worrying about it's lack of heat resistance
Wayne, since the returned fuel is at a high volume its best to route back to fuel tank so that you can run engine a few minutes without worrying about over filling the returned fuel container
Thanks for watching and thank you for the support. Make sure to subscribe and turn on notifications.
Hi I have a volvo vnl D13 2010 I have a issue with my truck, drives good but when gets -5F or lower, truck shows check fuel filter and fuel feed pressure and truck starts shaking and stalling, I put diesel number 1, changed fuel filters the same problem, nothing helps, but when getting warmer drives great. What can be? Thank you
Did you fix your truck?
Need some help with a volvo d13. Its been deleted by previous owner. With 700k miles. Was running good but about 2 months ago i got it governed, after awhile fuel filter started getting dirty and been having ro replace it often because it gets to blocked and engine looses power. Now even after replacing fuel filter still has lost lots of power. Any ideas? Was just explainning what ive done to truck but not sure if related. Thanks in advance
What was yoour problem with the truck ? Did you fixed ?
Hi sir how sir I have Volvo ge d13 purabalm oil and disel mix I changed all Seel mean injector seel and feul pump seel but again com disel in oil
Could be a leaking injector during operation or a leaking injector. Have you done the test in the video?
So is the Volvo dd13 truck a bad buy or what
Will aeriation eventually go away if I just run the shit out of it??? Has somebody made a homemade tool like that $2k j32753 sight hoses?
Where can I get the tooling
My deff lines keep melting by deff dozer i just cleaned dpf and new deff sprayer and it happend again any suggestions thanks boss!!!!🤘👍
Are the def lines touching the DPF or exhaust pipe?
No these us the second time it happens they tought i had a plugged dpf so i cleand it and change def doser and secure deff lines around chassis and trans to pump nothing rubbing same problem......
Cesar, where exactly are they melting at?
@@TATEXPRESSINC Its melting were deff line connects to deff dozer like its touching dpf can but its not 😳
What could cause replace fuel filter sign goes off with in 500 miles every time I change filter...?? Pls help
What type of fuel filters do you have?
Fleet guard...i do change my oil at sppedco
The words "stumbling" and "studdering" were mentioned on here as symptoms. What exactly do those mean?
Aldo, thanks for watching. I will be more technically correct with description next time. Rough idle, staling or no throttle response.
@@TATEXPRESSINC hi there I’m getting the same problem, what was the fix for this truck?
Hi , perhaps, you or someone reading the comments can help me out on this one , this happen 3 times already , 2014 Volvo d13 vol , somewhere on the passenger side behind the turbo , while driving ,something spray big time ,,and creates big cloud of white smoke,could it be DEF? doesn’t look diesel ,by the time I open the hood and look only smoke clearing out and you could see spray on chassis , but it dries out and cannot see where is coming from , engine runs ok during this and no sound at all,a DEF icon shows on the lower left corner of the instrument panel shows but it clears almost immediately , anyone has an idea what can be causing this, thanks
You have a leak in the exhaust system. It can be 7th injector line, 7th injector gasket or any of the exhaust clamps after turbo.
@@georgesokolov4155 thanks , now I finally got this 5 mile derate think going right now and it wouldn’t let me regen ,even forced regen , filters are ok , but i got a reductant injection valve control bank 1 , unit 1 circuit open , ireally dont know what this is but ihave to find out rather soon
??? No fuel is being used from passenger tank …. Reading is off and running off of driver side tank only
Any idea what I have going on
So your not going do the other half of that test and hook the clear line up to the supply to the head. air in fuel can also come from filter base, fuel lines, and tank pickups.
Nick, you are correct. Air in fuel may enter in multiple areas. This particular engine had a failed fuel pressure regulator
I have a 2006 Volvo vnl with a d12 engine. I don’t have power but I still get great gas mileage. What should I check to see what my problem is?
Brother I'm trying to buy a truck please advise me what's the make model year and engine should I buy..please please please help
Brother, check out my channel. I am About to start a series on business of trucking.first video should drop tonight...don't rush. Ill help u every step. And watch this guy too. He's awesome
Zidan, what will you be using truck for? 🇺🇸🇨🇱🔧🔧👊🏼
Buy a glider kit:)
@@TATEXPRESSINCI'm using the truck for general merchandise liss than 30k lb
Hello ,can I help you translate the video subtitle into Persian?
Hi bro my dd15 the all fuel go from driver side to the passenger side . Do u have any idea . Thank u so much
Moh, check the splitter valve on the fuel return and also make sure vent tubes on fuel tank are not restricted. Thanks for watching and be sure to hit that sub button.
Do u mean that valve located on the top of the transmission. The 2 valve? Thank you so much
Moh. Yes, that is the valve.
Ok i will try thank you very much bro 🙏
Thank you very much I checked it now works great thank you 🤲🤲🤲🤲🤲🤲
Just take the valve cover off and each injector has a number, and inter the number in by sequenced on the ECU DataBoard...
We actually found a faulty check valve. A faulty fuel check valve caused air rated fuel.
@@TATEXPRESSINC where can I find the fuel check valves
What happens if you losing too much?
My truck is losing too much diesel. What could be the cause?
I have a fuel problem
What was the issue? Injector cups?
Doug Besplug fuel lines to ECM cooler were not sealing properly. Thanks for watching 🔧🇺🇸👊🏼🇨🇱💪🏼
@@TATEXPRESSINC How did you tested or know which connection was sucking in air???
anshyr07 we bypassed the ECM cooler lines and then the bubbles stopped showing up in the return line during testing.
TAT Express Inc. did you run a fuel line directly to the fuel pump inlet??
anshyr07 yes, to cancel out lines coming from fuel tanks. 💪🏼👊🏼🇺🇸🔧🇨🇱
Sound is too low
Sounds quality sucks
Trash motor
Daw thanks for watching and make sure to subscribe. Yes, D13 can be a headache if not maintained.
Cat is worse