How To Make Bench Power Supply From ATX Power Supply | इसे बनाओ Rs 5000/- बचाओ

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • How To Make Bench Power Supply From ATX Power Supply | Bench Power Supply From ATX
    Overview:
    In this project, we will convert an ATX power supply unit (PSU) into a bench power supply, capable of delivering adjustable voltages and currents upto 24 V and 10 Amp, which can be used for testing and powering electronic circuits as well as for battery charging. This power supply can deliver multiple voltages and variable current output.
    DC Buck Boost Converter : amzn.to/43o2vR8
    Computer Power Supply as 230V/450W SMPS : amzn.to/3oDv3at
    Volt meter connection diagram
    drive.google.c...
    ---------------------------------------------------------------------------
    My Gadgets
    Camera : amzn.to/3gCTm46
    Backdrop : amzn.to/3OHdmzl
    Tripod : amzn.to/3gBRsRs
    Mic : amzn.to/3F6YHtW
    ---------------------------------------------------------------------------
    ESP32/Node MCU Playlist : • ESP-32/Node MCU
    Arduino Playlist : • Learn Arduino in Hindi
    Basic Electronics Components Playlist : • Basic Electronic Compo...
    Basic Electronics projects Videos : • Basic Electronics
    Power Supply Videos : • Power Supply
    Inverter Videos : • Inverters
    Join this channel to get access to perks:
    / @teknoistix
    #Teknoistix

Комментарии • 207

  • @ShakilKhan-ij4gp
    @ShakilKhan-ij4gp Год назад +4

    आपके सिखाने का तरीका बहुत ही उम्दा है सर जी, आपका कोई भी ट्यूटोरियल बहुत ही आसानी से समझ में आ जाती है।

  • @AnilSingh-433
    @AnilSingh-433 Год назад +2

    Sardar ji main aapki jitni bhi tarif karoon woh kam hai...maine aap se bahut kuch sikha hai...umar mein to aap mujh se chote ho par gyan ka bhandar ho...aap ki mehnat dikhai deti hai...sat sri akal.....

  • @aslamnoori
    @aslamnoori 5 месяцев назад +2

    You are a gem. The way you explained everything is understood to me as I'm literally a layman and not an electrical engineer or even not an electrician. Just some mediocre knowledge of electrical units.
    I've seen similar videos converting computer power supplier to a variable power supplier with same module. Some have used the same potentiometers with cover of bigger potentiometers ignoring the fact that potentiometers provided with module are meant to use occasionally. They are not recommended for bench power supplier where one may use them every time with different devices or circumstances. You rightly used potentiometers which should actually be used in bench power supplier.

  • @muhammadiftikhar5856
    @muhammadiftikhar5856 6 месяцев назад +1

    Excellent Sir very good video for learner also this is a very useful power supply all credit goes to you.

  • @kingshahzad78
    @kingshahzad78 5 месяцев назад +1

    Stay Blessed. I learnt ma my things from you dear.....❤

  • @MoviesInsight7
    @MoviesInsight7 2 месяца назад

    Paji aap accha video banate ho koi banda amper check karke nahi dikhata aap dikhate ho thankyou paji

  • @ajayvns
    @ajayvns Месяц назад

    Yar etana achha channel hai, aur etane kam subscribers aur views hai. How sad😢

  • @Invisible_0011
    @Invisible_0011 Год назад +1

    Kaafi informative video h Bhai...thank you so much

  • @deepakkharethankyou8094
    @deepakkharethankyou8094 2 месяца назад

    Vary imformative and useful video Sirji

  • @Mr140849
    @Mr140849 Месяц назад +1

    In every ATX Power Supply unit contains a 'Supervisor' IC like KA7500 ,CG8010 etc. As soon as a floating negative (-12v) is taken as main Ground for the said Buck Converter with respect to +12v of the main SMPS unit, the 'Supervisor IC' will trip the supply unless necessary modifications are made.

    • @netrapal729
      @netrapal729 Месяц назад

      Yes my smps trips when I sort positive negative wire to check amps what to do in this case?

  • @marketanalysis1203
    @marketanalysis1203 Год назад +1

    Beautiful learning video 🙏

  • @sumantapatelg.c8882
    @sumantapatelg.c8882 Год назад

    Bahut badhiya jankari di sir thank you,👃👃👃👃👃

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Thanks
      Please subscribe the channel and share the video with your friends

  • @SANATAN_HI_SATYA_DHARMA_HAI
    @SANATAN_HI_SATYA_DHARMA_HAI 7 месяцев назад

    Very well described not a single faltu word like others..speaking "dosto dosto" in every sentence and other nonsensical extra syllables

  • @sandeepgupta6526
    @sandeepgupta6526 11 месяцев назад

    आपने बहुत अच्छी पावर सप्लाई बनाने की विधि बताइए मैं इसको जरूर बनाऊंगा धन्यवाद

    • @TEKNOISTIX
      @TEKNOISTIX  11 месяцев назад +1

      जानकरी अच्छी लगी तो कृपया और लोगो के साथ भी शेयर करे

  • @actechBaDsHaKhAn
    @actechBaDsHaKhAn Год назад +1

    Sir ki video pehle like baki kaam baaaad me

  • @yogeshsutar1559
    @yogeshsutar1559 Месяц назад

    Very nice

  • @smartguy3k
    @smartguy3k Год назад +1

    Great video. Thanks

  • @syedaqeelhassanraza5015
    @syedaqeelhassanraza5015 Год назад +1

    Wow sir isi ka intezar tha ... Thank you so much ... ❤❤ ...

  • @user-ze4bg9rf6s
    @user-ze4bg9rf6s 8 месяцев назад

    Very simply explained....

  • @professionaloverthinker-x
    @professionaloverthinker-x Год назад +1

    brilliant work.

  • @Techno0070
    @Techno0070 Год назад +1

    Very informative and creative video ❤❤

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад +1

      Thanks for appreciating
      Please subscribe the channel and
      Keep supporting also share with your friends 😃

  • @phantom_psyche
    @phantom_psyche Год назад +1

    bhai was waiting for ur video ..thnx for making this

  • @marketanalysis1203
    @marketanalysis1203 Год назад +1

    Sir 🙏 buck converter बिना कंप्यूटर smps वोल्टेज एंड करेंट कंट्रोल कर सकते है क्या इसिकी ऊपर एक वीडियो बनाओ ।

  • @manikde4482
    @manikde4482 9 месяцев назад

    Good vdo. How the wiring of two LED were connected ?

  • @ltshering
    @ltshering 5 месяцев назад

    Very well explained sir ,

  • @BijayChoudhary-qe4pp
    @BijayChoudhary-qe4pp 2 месяца назад

    SMPS ka ripyer ka video banaye

  • @rajeshkumrpshah
    @rajeshkumrpshah Год назад +1

    Excellent sir, Can i charge mobile from direct old computer power supply (smps) from respective wire I.e. 5 v which is already available in smps? Pl reply

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Yes

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Chek the 2nd part of this video i have added usb post in this suply

  • @MoviesInsight7
    @MoviesInsight7 2 месяца назад

    Paji yea step down buck converter kya amper ko boost karta hai please paji reply do ❤❤

  • @ravikantsoni4334
    @ravikantsoni4334 5 месяцев назад

    Bahut Sundar

  • @motivationspeech5727
    @motivationspeech5727 Год назад +1

    🙏 ਸਤਿ ਸ਼੍ਰੀ ਆਕਾਲ ਵੀਰ ਜੀ 👌👌👌👌👌

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      ਸਤਿ ਸ਼੍ਰੀ ਆਕਾਲ ਜੀ

  • @dhananjaypatwardhan1829
    @dhananjaypatwardhan1829 2 месяца назад

    Namaskar
    Bahut badhiya. Kya aap ise banakar bechate hai? How much it will cost? May/June 2024.Please reply

  • @tejosexpress1980
    @tejosexpress1980 Год назад +1

    Hamne isko banaya hai, kindly check link. Little modified for charging or load more then 2 amp current, otherwise negative side first recovery diode will damage.

    • @electrobiotech
      @electrobiotech Год назад +1

      maine vi kia tha same probleam

    • @tejosexpress1980
      @tejosexpress1980 Год назад

      Replace a first recovery diode, with high amp and attached a heatsink, it's work perfectly fine.

  • @electrobiotech
    @electrobiotech Год назад +1

    app mujhe a batao ki -12 volt ka amp reating 0.8 AMP hai to usmain 10 AMP flow kaise hogi
    sir.

  • @sahilranaled5117
    @sahilranaled5117 Месяц назад

    Sir yeh jo ptensho moter kon se lgaye h apne amp aur voltage
    Bole

  • @dibyabaruah3065
    @dibyabaruah3065 5 месяцев назад

    Very good circuit can u give me the specification of the required components please.

  • @rakeshmathur6136
    @rakeshmathur6136 6 месяцев назад

    Excellent

  • @Nitish002
    @Nitish002 Год назад

    bahut mast jabardast

  • @whitedevilbd
    @whitedevilbd 4 месяца назад

    Voltmeter ki red wali wire jo powersuply ki 5v red wire se jora apne, wo sahi hai kya?

  • @Visionary_
    @Visionary_ 10 месяцев назад +1

    Sir itni knowledge kaha se aati h sir.
    Please kon sa course kiya h apne.
    M bhi 15 yrs ka hu aur maine ek bhot powerful rc car banaya h.
    Ye alag alag components ka knowledge kaha se aata h please tell.
    Thank you sir

    • @TEKNOISTIX
      @TEKNOISTIX  10 месяцев назад +1

      Beta practice se sab milta hai
      I am m.tech in electronics

    • @Visionary_
      @Visionary_ 10 месяцев назад +1

      @@TEKNOISTIX thank you sir

  • @dineshnaik2785
    @dineshnaik2785 8 дней назад

    I have one question regarding Digital VOLT AMMETER connection. Among the 3 thin wires yellow goes to positive output. And red goes to buck converts(300w) output + terminal. But what about black wire?
    Which is the correct seen many videos all have different.
    1) Not connected
    2) connected to buck converters output negative.
    3) added LM7812 at buck converters o/p and given safely 12v to power up the digital V/A meter.
    As per me the 3rd ne should be correct but all of above cases are working... Pls help me.

  • @shafiqansari4344
    @shafiqansari4344 Год назад

    Smd led volt ampere meter reading circuit par video bnayein

  • @murthyvenkatesh9368
    @murthyvenkatesh9368 11 месяцев назад +1

    I have done the same with the board purchased through the link of description. I have added multi turn potentiometers. But when turned clockwise the current and voltage are decreasing but for anti clock rotation increasing. The led connected externally is also not glowing. What may be the problem? Hope it will be answered soon

    • @TEKNOISTIX
      @TEKNOISTIX  11 месяцев назад +1

      Just reverse the polarity of potentiometer

  • @dailylifetechsolutions8852
    @dailylifetechsolutions8852 4 месяца назад

    Bhai led ka connection kese ho ga?

  • @jogendersingh4253
    @jogendersingh4253 4 месяца назад

    Excellent sir. Good 👍👍

  • @sabirsheikh555
    @sabirsheikh555 5 месяцев назад

    Can we use 200w buck converter or 75w xl4015?

  • @mahammadtaj6213
    @mahammadtaj6213 2 месяца назад

    Sir is dc machine sey smartphone repair k liye use kar saktey hai? Actually mereko phone ak amp reading lena ha???

  • @Dhanvin_sandeep
    @Dhanvin_sandeep Год назад

    Sir it's very good video easyly understand
    Sir can u do basic components testing useing multimeter all components
    Resistor capacitor inductor
    Diode transisitor npn and pnp
    Mosfet npn and pnp etc step by step
    All the video is so solwly explained that is why easily Understand all fresher so
    Please do the very need full
    Thank you

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Already done in multimeter video
      Chek basic electronics playlist

  • @kishorhaunskar7366
    @kishorhaunskar7366 Год назад

    Infinity ♾️ likes,👌👌👌👍👍👍❤️ for video. 🙏

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Thanks for appreciating
      Please subscribe the channel and
      Keep supporting also share with your friends 😃

    • @bameswarbarman7702
      @bameswarbarman7702 Год назад

      ys sear ok

  • @rajuchoudhary5522
    @rajuchoudhary5522 Год назад +1

    Hello sir solar inverter wala video kab aayega😊

  • @vijayakarekar
    @vijayakarekar 8 месяцев назад

    Thanks sir......

  • @kalyandas5861
    @kalyandas5861 Год назад

    Sir, mere do doubt hai. So kindly clarify kar dein.
    Apne -12V wire ko as a ground treat kiya hai jiska maximum current capacity 0.8 Amps hai.
    1. As +12V line me 14 Amps current flow kar rahi and -12V me 0.8 Amps, to kya reverse current ka koi issue aayega??? Kya humein koi diod use karna chahiye?
    2. Kiu ki -12V independently 0.8 Amps ke liye designed hai, to -12V line ke saath attached diods vi kam Apms ke honge. Agar is power supply ko hum more than 7 Amps ka load de to kya -12V line ke saath attached diods burn hone ka chances hoga? if yes, to kya humein kuch further modify karna padega?
    Regards
    Kalyan

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Aisa kuch nahi hoga
      Maine 23 v 11 amp par try kiya hai it works very well

    • @kalyandas5861
      @kalyandas5861 Год назад

      @@TEKNOISTIX Thank for the valuable information and clearing my doubts.
      Regards
      Kalyan

    • @kalyandas5861
      @kalyandas5861 Год назад

      I have tried the way mentioned in this video using +12 v and -12 v for making it 24 v power supply. When I used the supply in 20v and crossed 2 amps of current the power gone shutdown because of the autocut protection circuit present in the power supply. I cannot use for any appliances where more 2 amps of current is required.
      Sir, is there any way to come out of this limitation? And if yes then how to do that?
      Regards Kalyan

  • @ismailmohammed5588
    @ismailmohammed5588 6 дней назад

    Potentio meter ki value bataye

  • @ghulammohiodin1514
    @ghulammohiodin1514 Месяц назад

    Dear sir i tried as per your setup, +12 and -12shoulb be 24 volt, but i am getting 16.7, how i can solve this issue plz?

  • @pankajdidwan
    @pankajdidwan 6 месяцев назад

    sir make voltmeter 4 in 1 16*2 led disply 1c2 moduel and ACS 712 with Arduino

  • @mannusolutions7269
    @mannusolutions7269 2 месяца назад

    Bettry charge nahi ho Rahi hai current ko ghatna chahiye na ki badna chahiye

  • @Dubai84
    @Dubai84 Год назад +2

    👍👍👍

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад +1

      Thanks for appreciating
      Please subscribe the channel and
      Keep supporting also share with your friends 😃

  • @Mr053125
    @Mr053125 Год назад

    VERY INTERESTIG VIDEO , I WILL TRY TO MAKE IT. WHAT IS THE NUMBER OF BUCK CONVERTER, IS IT XL4016 OR OTHER. CAN YOU PLEASE MAKE THE WIRING DIAGRAM. THANKS.

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Link to purchase and wiring diagram both are in description

  • @vrfriends77
    @vrfriends77 Месяц назад

    Potentiometer kitna value ke hai

  • @narindersingh2474
    @narindersingh2474 6 месяцев назад

    Bai g ye kitne amp output degi 12 v chlanekelie

  • @pappupathak3909
    @pappupathak3909 Год назад +1

    Best power supply

    • @lookmeram
      @lookmeram 10 месяцев назад

      By using - 12v you will get max 0.5 (half) amp current. On 24 volt max current will be 0.2 (less then quarter amp) .

  • @swapnilbagul1987
    @swapnilbagul1987 7 месяцев назад

    Sir Inverter 12v 150Ah ki Tubular Battery ko Charge kar Sakte hai kyaa ? Or Kare to Voltage and Amepere kitne pe Set kare ?

  • @hellomini199
    @hellomini199 Год назад

    Hello sir good morning m mujhe components entry No aur sensor key programming sikhane sar video banaaiye

  • @pratapkumargupta4056
    @pratapkumargupta4056 Год назад

    Exide SF 12v 150ah C20 Battery Ko Charge Karsakte Hai Kitne amp Par

  • @maheshraj6053
    @maheshraj6053 4 месяца назад

    Mere pas ak 24 volt he usume mitar nehihe lekin me usko 12volt. Betery charge karna chahatahu hoga kya

    • @TEKNOISTIX
      @TEKNOISTIX  4 месяца назад

      Pehle aapko uska voltage kam karna hoga
      Buck converter use kar sakte ho

  • @arvindbhima1784
    @arvindbhima1784 5 месяцев назад

    Sir maine ye bana to liya par ampere thik se show nahi kar raha hai saath hi voltage high 22v bata raha hai kya karu

  • @shravan7478
    @shravan7478 2 месяца назад

    1 question -12v. Or +12v dono se 24 volt kese banega

    • @TEKNOISTIX
      @TEKNOISTIX  2 месяца назад

      Voltage is always a potential difference between two terminals
      There is a 24 volt difference between - 12 to + 12

  • @jassi.tv6860
    @jassi.tv6860 10 месяцев назад

    Good👍👍👍👍👍

  • @syedaqeelhassanraza5015
    @syedaqeelhassanraza5015 Год назад

    Sir kya ham isme high load daal chala sakte hain ... ??? Batayen sir ji ..

  • @syedaqeelhassanraza5015
    @syedaqeelhassanraza5015 Год назад

    Hello sir ji ... 1.7mhz oscillator circuit banayen plz ❤

  • @amitghosh6966
    @amitghosh6966 Год назад

    Jo +12 aur -12 Volt output hai unko use karke hume zyada Ampere nahi milega kyuki negative output ka Ampere positive wale se kam hai. Agar boost converter module hota aur hum 12 Volt output se output lete aur boost karke 24 Volt karte tab zyada Ampere milta. Am I correct?

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад +1

      I have used this power supply for 22 v 8 amp and its working fine

  • @kpr16180
    @kpr16180 Год назад +1

    Also make it without buck converter

  • @dibyabaruah3065
    @dibyabaruah3065 5 месяцев назад

    I have tried it but i am only getting 23.8 v fixed which cannot be adjusted with potentiometers.what may be the possible reasons would u kindly explain!

  • @swapnilbagul1987
    @swapnilbagul1987 7 месяцев назад

    Sir Can we use this for Inverter Battery Charging ?

  • @hearttoparesh8618
    @hearttoparesh8618 4 месяца назад

    Potassium volume kitne ki value he..47.k..ya...100 k

  • @bameswarbarman7702
    @bameswarbarman7702 Год назад

    sear aysa sarkit banake dekhao 12 volt saplay se hoga led 1s on 4s off ho plzz help

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      You can use relay with arduino

  • @gtatamil8145
    @gtatamil8145 Год назад

    Super

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Thanks for appreciating
      Please subscribe the channel and
      Keep supporting also share with your friends 😃

  • @sayandas-uz4yr
    @sayandas-uz4yr Год назад

    Potentiometer konsa hai specifications batao

  • @subodhshakya3166
    @subodhshakya3166 Год назад

    Sir yahi project me kotna kharchha hoga .
    Please tell me

  • @sandeshsharma7471
    @sandeshsharma7471 Месяц назад

    -12 volt kitne amp ka hota h. Ye to only 1.5 amp ka hota h

  • @saanjayray
    @saanjayray Год назад

    Soldering iron kaun sa brand tha

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад +1

      RS pro

    • @saanjayray
      @saanjayray Год назад

      @@TEKNOISTIX mummi , itne ka toh hamara pura ration aa jayega mahine ka

  • @aninditamajumder3856
    @aninditamajumder3856 11 месяцев назад

    Brother what you have used old kharab power supply or working power supply please reply because I have found in almost 10 shops in my city for working old power supply they are telling working is not available they have only old kharab one please reply 🙏🙏🙏

    • @TEKNOISTIX
      @TEKNOISTIX  11 месяцев назад

      It is old power supply but working
      I got it from computer repair shop for 250 rs

    • @aninditamajumder3856
      @aninditamajumder3856 11 месяцев назад

      @@TEKNOISTIX but I am not getting working I have found on 10 shops what can I do please reply

  • @rohangautam
    @rohangautam Год назад

    Bauji ek bani banai send kardo chelle nuu

  • @bameswarbarman7702
    @bameswarbarman7702 Год назад

    sair aysa sarkit banay flash led 1s on 4s off plzz help

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Chek arduino programming video or 555 timer video
      It has already done

  • @syedaqeelhassanraza5015
    @syedaqeelhassanraza5015 Год назад

    short circuit protection hai isme ??

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      Yes

    • @syedaqeelhassanraza5015
      @syedaqeelhassanraza5015 Год назад

      @@TEKNOISTIX sir ji chote potentiometer nikaal kar bade waale potentiometer 10k ka laga sakte hain ?? Koi problem toh n hoga na ?? Plz reply kijiye

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад +1

      Koi problem nhi hoga

  • @rajuchoudhary5522
    @rajuchoudhary5522 Год назад

    Sar ek solar inverter bnao Jo direct solar panel se chale😊

  • @vipulkumar5620
    @vipulkumar5620 11 месяцев назад

    Can i use only potentiometer Instead of Buckconverter

  • @MrAarahaan
    @MrAarahaan 8 месяцев назад

    potentiometer ka value kya hai

    • @TEKNOISTIX
      @TEKNOISTIX  8 месяцев назад

      10 k

    • @MrAarahaan
      @MrAarahaan 8 месяцев назад

      @@TEKNOISTIX thank you so much sir for the reply.
      It is always great to see your videos.
      Your videos are always full of information please keep up the good work

  • @dpankajkumar2186
    @dpankajkumar2186 4 месяца назад

    TC ka value nahi bataya AAP ne sir

  • @aninditamajumder3856
    @aninditamajumder3856 11 месяцев назад

    And brother one more thing if i use another buck converter module of 300w and 10a will problem occour there . I think so my answer will be given.
    Please reply 🙏🙏🙏🙏🙏🙏

    • @TEKNOISTIX
      @TEKNOISTIX  11 месяцев назад

      you can use any buck converter according to your need

  • @perfectcareelectronic3239
    @perfectcareelectronic3239 Год назад

    Sir AC compressor ko chalane wali drive taiyar Karen jis se help mil sake

  • @randomfunda6991
    @randomfunda6991 20 дней назад

    Mere yha 30 rupay ki h

  • @teiborwanniang6535
    @teiborwanniang6535 Год назад

    Bhai i have and old earphone splitter which i can plug in two earphones or headphones and i also have a mic splitter which can be used inly for mic with no place to plug in earphone and it is already cut from the middle can u make a video on connecting the mic splitter to the earphone splitter so it will become a headphone earphone splitter plz bro i would be grateful if u could do that because i dont want to waste money

  • @neerajmanga3204
    @neerajmanga3204 Год назад

    Sir small potentio meter has more turns can be set fractionsl vslues easily but large as you install will not
    Will conections be same?
    Pls reply

  • @sunilhooda624
    @sunilhooda624 Год назад

    You did not mention the values of the potentiometers.

  • @GULSHANKUMAR-ox6rm
    @GULSHANKUMAR-ox6rm 11 месяцев назад

    i have made a similar Power suply but It doesn't turn On just a little spin in Fan & Green led glow for half a second and then everything Shuts down.
    But when i disconnevted Voltmere+Ameter+Buck Converter The SMPS turns on perfectly and i checked The Voltmeter Ammeter and Buck Converter Disconnected seprately they all also Works fine
    But when Connected with smps Nothing Turns On Please Help Me Out

  • @dhritinjoy
    @dhritinjoy Месяц назад

    Why my B10k potentiometer is burning

  • @ltshering
    @ltshering 5 месяцев назад

    Potentiometer ki value kya hai sir

    • @TEKNOISTIX
      @TEKNOISTIX  5 месяцев назад

      10 k

    • @ltshering
      @ltshering 5 месяцев назад

      @@TEKNOISTIX thanx sir god bless

  • @shrikants.kamalapurkar7204
    @shrikants.kamalapurkar7204 10 месяцев назад

    Your Narration is Simple and to the Point, Appreciate your efforts, I have a Query whether it is possible to get +/- 12 V DC 500 mA adjustable from this Power Supply by any further Modification?

    • @TEKNOISTIX
      @TEKNOISTIX  10 месяцев назад

      Yes it can be obtained without any modification

    • @shrikants.kamalapurkar7204
      @shrikants.kamalapurkar7204 10 месяцев назад

      If you find time can you please guide me or suggest Video/ Tutorial/ Writeup etc? @@TEKNOISTIX

  • @elexshown2520
    @elexshown2520 Год назад

    Sir can we charge 12.6 Amp betry with 12.6 but 5amp chargers with bms inbuilt or we need to have same 2 amp charger ?

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      A 12.6 Ah battery can be charged with max 3 amp current

    • @elexshown2520
      @elexshown2520 Год назад

      but bms will not do job to charge 2amp bettrywith 5 amp charger sir

    • @TEKNOISTIX
      @TEKNOISTIX  Год назад

      You can give 5 amp but it can damage the bms as well as cells

  • @aninditamajumder3856
    @aninditamajumder3856 11 месяцев назад

    Led ka middle wala leg negative hai ki positive

    • @TEKNOISTIX
      @TEKNOISTIX  11 месяцев назад

      Alag alag LED ka alag ho sakta hai
      Aap apke paas jo led hainusme power de kar chek kare

    • @aninditamajumder3856
      @aninditamajumder3856 11 месяцев назад

      @@TEKNOISTIX buck conveter wala led ki external led